Whether the device is Simulator

Similar Questions

• Unable to launch the Device Manager Simulator

  My system like environment:

  13.04 Ubuntu

  Java 7

  inter i3 4 GB

  VMPlayer 6

  After installation the QNX Momentics IDE, I use Device manager download the sdk and Simulator.

  But I can't launch the Simulator. Nothing happen when I click on the launch button in the Device Manager.

  Hello

  Unless you redefine the paths by default during installation, the Simulator will be located in the base directory under the folder named "bbndk" with all the SDKs BB10 and IDE files. (#1 below screenshot)

  After you download the Simualtor & VMware for linux:

  1 - Open VMware and click Open Virtual Machine

  2 - Go to the folder where the BB10 to add Simulator located in select it [in the./home/bbndk/]. VMX file

  3. now select the simualtor you want to start in the left menu in VMware and click 'play Virtual Machine'

  

  

  

  Hope this helps.

  Thank you

  Kareem.

• Debugger does not move to the breakpoints on the device and Simulator

  Hi all

  my Blackberry 9800 recently got updated to v6.0.0.534.

  I use BlackBerry java plugin in Eclipse.

  The details are the following:

  BLackberry Java Plugin version 1.3.0.201102031007 - 19

  BlackBerry Java SDK's 6.0.0.30

  And the JDE is 6.0.0

  First of all, there are some files missing debugging, I have that and earlier was able to debug properly.

  Now he comes into debug mode, but does not touch the breakpoints.

  Hi all

  I've had this work now, I cleaned up the Simulator and then deleted these files:

  . COD

  .jar

  . Debug

  .jad

  . CAP

  .

• device is simulated

  Hiya,

  I'm learning to build vi without physical connection. I have created peripheral pc16220 simulated able and Explorer. I tested the signal is a white noise. I went back to labview and code examples to locate the acq & chart - int.vi and voltage parameters inserted in the control of the physical channel and ran the vi. I got the sine wave.

  I want to check if the device is simulated and cannot locate the deviceissimulated palette and do not know how to perform this action. A tutorial in zone.ni.com give following information but I have not found the route function > measure or...

  
  ( zone.ni.com to discover during the execution of a program if a device is simulated, use the DeviceIsSimulated property on the property OR DAQmx Device node. Open the functions > NOR measures > DAQmx > DAQmx advanced > DAQmx System Setup subpalette find this property node. The property returns true if the device is simulated.

  You can rephrase your message more clear to understand what are your questions?  You posted an image that does not exist.  It presents itself as a red X image.

  I found the property node DeviceIsSimulated by following the path down the palettes you have posted.

  I think you have to say you faked a PCI-6220.  I don't know how you "test signal is white noise.

  You can expect a different waveform when you change the channel of the simulated device?  When you simulate a device, you will always get a sinusoid signal.

  If you can specify clearly what you're trying to do, how it does not work, and where you have a problem and ask a question, then it will be possible to help you.

• Get the IP addresses of the devices connected to the WiFi network

  Hello guys,.

  I've been looking around and trying to understand this point, but I don't have a solution. The problem is to get the local IP addresses of all devices connected to the WiFi point of access/router connected to my BlackBerry. Similar to the way in J2SE nature you can get the IP using InetAddress.getLocalAddress () and then browse ip addresses and call InetAddress.getByAddress (ip) to check whether the device is accessible. Possible is something similar in BlackBerry or not?

  No, the fault was entirely mine, I misread your message.
  no idea how to do that, there is no access from low level of the network interface and the API is really limited.

• State of the device set OFF using powercli

  #$e = get-esxcli - vmhost esx1

  #$lun = get-content lun.txt

  Any idea on the equivalent of esxcli storage set of basic device - state = off naa.xx d

  #$lun | {$e.storage.core.device.set ($sur, ($_), $off)}

  Assuming that this file un.txt contains the IDS devices ("naa.xxxxxx"), you can do

  $esxcli.storage.core.device.set($_,$null,$false,'on')
  

  When $_ is the device ID, the 2nd parameter is a new name for the device if necessary (if not specify $null).

  The 3rd parameter is a Boolean value that indicates whether the device should be = not persistent or not.

  The last parameter sets the status can be 'on' or 'off '.

• USB-6341 not on the list of simulation devices

  I want to create a USB-6341 siumulated, but this model is not in the list of available under devices simulated in MAX X series devices. I don't see in the devices of series X available for the simulation are PCIe devices. I have MAX 4.7, 9.1.5 DAQmx and LabVIEW 2010. I did this on other computers running older versions of the software and saw this device on the list, so there must be a software component that I have installed, but I can't understand what it is. Any suggestions?

  Richard

  Material of the series X USB were not released before DAQmx 9.2; you need at least this version in order to use a simulated.

• App hangs on the device, but works well on Simulator

  Hello! Last week I had an approved app and it is already in place in the BlackBerry App World. Before being approved, he rejected once, the e-mail message noted that "when testing your app on BlackBerry Z10, I found that he was unable to throw."

  I replied stating that the app has worked very well in the Simulator and asked some tips to solve the problem. It seems that the application got reparsed as overnight has been approved.

  Today, I had the chance to test my application on a real device and I found it crashed right after the launch.

  I don't know what could be wrong with my application. I'm guessing that the reason of this problem could be something similar to this thread; but I think I'm not directly joking with the camera in my code, everything is built on Air.

  Could you point me in the right direction please?

  Thank you in advance!

  What version of the OS is the device running?

  AIR 3.5 is not supported up to 10.2, which is not available to consumers right now better I know.

  If the camera is turned on between 10.0 and 10.1, check that your application - app.xml file appeals to AIR 3.1 namespace and not the AIR 3.5 namespace.

• Who should be subjected to the App world, Simulator or device?

  Hello

  I use the SDK of webworks for BB10 command-line to package and sign my apps. I found 2 subfolders named "Simulator" and "peripheral" generated.

  My first question is what should I submit the .bar file in the subfolder "peripheral" in appworld?

  In addition, the .bar in "Simulator" folder works fine once deployed on the BB10 Simulator. I'm trying to deploy the file .bar 'device' folder on the Simulator, but there is a dialog error popped up. I don't know if it will happen in the event of physical device, because I have no alpha device yet.

  Here's some of my file config.xml

  I have an alpha device and only use the "Device".bar files to test my apps. Works very well on alpha machines.

• The10.3 Simulator displays icons on the toolbar Action exactly as they are displayed on the device itself

  I found that when I build less than 10.3 and run Simulator 3.0 or 3.1 that display icons in the action bar when VisualStyle is 'brilliant' in black on a grey and not black background on white. This is true if the icon is black on white or white on a black background in a first time, and it is the same for all screen sizes.

  I've attached an example.

  This is how the icons are actuualy on the device or will they be black on white.

  Mark, I just tested my change on all the bright and dark features.

  I was looking through my list of icons and I arrived just to pull the top one on the right... the solution was obvious!

  It is in this context of the specific icons that I had placed on the action bar, which was the question. Icons were reversed, but it is in this context.

  I found a complement to my graphics editor to remove (silimaire value = 0) the background and they displayed as expected.

• App works on the Simulator, but not on the device

  Just try to run the helloworlddemo app compiles fine and works on the Simulator without problem. All I get on the device is an icon of the application that does nothing when clicked.

  I had read this might have to do with the version of the JDE is high for the operating system on the device, but I'm running JDE 6.0.0.37 and the operating system on the device is 6.0.0.666

  I tried with my own app first, compiled, signed it and get the same result as helloworld, then its certainly some mounted sort of question but I have no idea of what

  Thank you

  Sheldon

  Thought of it - was to set the permission of application so that all 3 items were "allow."

• image in SVG shows it on the Simulator, but not on the device

  Hi all

  I put theelement in an SVG file with an image that I pick up store or the SD card. I can see the image set on the Simulator, but am not able to see it on the device.

  Here is the code snippet I definition of the element in the image:

  SVGElement "newelement" = (SVGElement) _document.createElementNS (SVG_NAMESPACE_URI, "image");
  newElement.setTraitNS (XLINK_NAMESPACE_URI, "href", dittos);
  newElement.setFloatTrait ("x", 0);
  newElement.setFloatTrait ("y", 0);
  newElement.setFloatTrait ("width", Display.getWidth ());
  newElement.setFloatTrait ("height", Display.getHeight ());
  _svg. AppendChild (newelement);
  Invalidate();

  Thanks in advance.

  ~ Shri

  It was with the size of the Image. Too big a picture and the device wont set it to SVG canvas.

  If the scale down the image and set the image if you want to set asin SVG.

• Problem with encryption on the device, of course Simulator

  Morning,

  I work with encryption and posting data to a web service. It works fine on the Simulator, but when posting to a service connection on the device, I get an error "Invalid Credentials", which I think is caused by the encryption does not properly.

  I'm using BlockEncryptor, with PKCS5FormatterEngine and a generated InitializationVector.

  BlockEncryptor encryptor = new BlockEncryptor(new PKCS5FormatterEngine(
                  new AESCBCEncryptorEngine(new AESKey(
                          Base64InputStream.decode(Constants.AES_PRIVATE_KEY)),
                          iv)), outputStream);
  

  Can someone think of a reason why it would work in Sim, but not on the device?

  Thank you

  Okay, sort...

  ERM... Let's just say attention to upper/lower case... Apparently, they produce different cipher text

  Yes... Lets never speak again of this

• BrowserPlugin works Simulator, but the device does not recognize the mime type

  Hello world

  Use the BrowserPlugin class in JDE samples, I was able to record a personalized with my BlackBerry mime type. When the browser makes a redirect to a specific page with the mimetype, the browser will recognize and use getBrowserContent() to move my application to the foreground, above the BlackBerry browser.

  I have this working on the Simulator, but on the device, I get the message: "unable to display the selected item. You want to save the item? »

  When I click 'No', I get the message: "Unsupported media type: application/x-vnd.rim.xxxtest.

  Like I said before, it works on the Simulator. I supported by the web server mime type, and I created a library project that will run at startup that will record the mime with the device type.

  I've debugged on my real device and confirmed that my library project is actually the launch...

  Someone know why this might work on the Simulator, but not on the device?

  Ah,.

  I'm embarrassed. I had unconsciously assume that when I used Javaloader to load my application to my phone that it would also include the referenced library projects... I was wrong!

  I loaded the library project separately and it works very well.

• Private opens in the Simulator, but not on the device

  Hello world

  I have a BlackBerry Tour 9630 (4.7.1.61). I'm running the 4.7.0 Simulator in Eclipse.

  Does anyone know why my application would open up a private in the Simulator without problem, but the browser does not open on my real device? I get no error on the device, it just goes to the next screen. I confirmed that the internet works on the device, and I don't see why use only the type of browser BIS would be a problem (I also tried BES).

  Here is my code:

  UiApplication.getUiApplication().invokeLater(new Runnable() {
      public void run() {
  
      BrowserSession session = BrowserLocator
          .createBrowserSession(BrowserLocator.BROWSER_TYPE_BIS);
              if (session != null) {
                  session.displayPage(loginUrl);
              }
  
      AuthorizeScreen authorizeScreen = new AuthorizeScreen();
      UiApplication.getUiApplication().pushScreen(authorizeScreen);
      UiApplication.getUiApplication().popScreen(OAuthScreen.this);
      }
  });
  

  Thank you!

  Thanks for your help.

  The session was to return null. I was able to reproduce this behavior in the simulator using a different type of browser not supported by the service books. Finally, I removed my own BrowserLocator() class (for the call of a certain browser) and replaced by the BrowserSessionFactory() provided in the JDE samples. I now have the browser on the opening device.

  What is the safest Bet, to use the default browser of the device, or use a browser BIS?

  Thank you!