Which means 'H. Line' on the page composition options?

Similar Questions

• What happened to the button on the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? I use it all the time and it is not on FF4.

  What happened to the button on the left end of the address bar which allow you to see the pages you had been so that you don't have to click the back button several times? You can look at the drop down window of pages and just choose whatever you want. I use it all the time and it is not on FF4. I want to go back to the old FF.

  If you right click on your back button, or click and hold down the mouse button, it will display the list. (I prefer a click-right, because sometimes my fingers slide when I try to click and hold)

• Spacing of lines in the Pages

  I have major problems with the spacing of the lines in the Pages 5.6.1. The default setting is '1', suggesting no doubt single spacing, but it is much broader than that should generally be understood by this term. For example if I type high address of the recipient on the left, using a reasonable font size the entire address comes out much too deep to fit in a standard A4 envelope window. I have to manually select, define Style - line spacing IE 4pt. I have to do this every time I write a letter (and I write a lot of letters). This has never been a problem in AppleWorks.

  IF anyone knows how to get around this, I would be grateful to know. Thank you.

  1 LineSpacing depends on the font size.

  You must define the spacing 'Exactly' and also check if there is before or after paragraphs spacing that pushes the lines apart.

  Peter

• 14 Photoshop. I'm trying to merge (do a panorama) 2 photos.  The 'automation tools are grayed out', which means that I can not select this option.

  I just upgraded from photoshop 10 to 14. I'm trying to merge (do a panorama) 2 photos.  It was very fast and easy in Photoshop 10.  In photoshop 14 the 'automation tools are grayed out', which means that I can not select this option.  I do something wrong or my installation does not work?

  In the 14 PES Editor, adobe has moved the Photomerge features to guided.

  Photoshop elements help | What's new in Photoshop elements 14

  Photoshop elements help | Guided - mode Photomerge edits

• How to resize a photo for which fills right up to the whole composition window?

  How to resize a photo for which fills right up to the whole composition window?

  Twirl in the transformation of the layer properties and resize it to the top. You can consider using the scale detail Preserving effect if the difference in size is important. Otherwise, its largest size in Photoshop.

  If you don't know how to scale a layer, you should really start here: starting After Effects

• Have blank lines on the page open automatically

  Hello
  
  Is it possible to have empty lines when the page is rendered as a table? It is a wizard that is generated in a table.
  
  Thank you
  Mary

  Create a process
  Choose the type of data handling processes
  Select Add lines slot table form
  Select on the laundry front header
  Enter the number of lines to add

  Kind regards
  Shijesh

• Portege A100 - which means five icons under the Toshiba Logo

  I want to know what is the meaning of the above five icons under the Toshiba Logo...

  Photo:
  http://i1.hk/d/attachments/day_100210/20100210_741cab47e44bf1501f7b4bQc5ay2xa3O.jpg

  Thanks for help

  As you can see this pictures shows different readers. On this point, you can choose which device should be used as first boot device.
  When you start your laptop and when these symbols appear to press the right arrow several times (the red line of the brand will be moved to the right) and you will see how you can choose the right device.

  When the device is marked just press the ENTER button.

• After the installation of update ver14.0.1, when you print a page on aweb site, why is that each line of the page to be printed each line on a separate page? !

  Each line in the document is printed on a separate page, IE: ten lines will print 10 separate pages for printing.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the print preferences.

• 7520 all-in-One: 7520 all-in-One scanning now a straight line of the page when using the ADF

  A week ago I noticed that the analyses using the ADF put a black line about an inch from the right edge of the page.  This will not occur during the analysis of flat glass; only when you use the ADF.  I checked the glass and paper tray are clean and free of debris.  I wish that it there a way to display an image of what I'm talking about.

  The line is about the thickness of a vertical margin of Notepad and gray line.

  Someone at - it ideas other than buying another printer?

  BINGO!  That's all.  The glass was dirty.  Thank you very much.

• Color printing: the print has colored lines across the page viertical obliterate the copy.

  I have a printer Officejet Pro 8600 working with my vista 32 bit.system.   My copies of original color print color strines vertical on the page. I have cleaned the print heads and aligned. Everything prints fine other circuits. What is the problem? Is there a solution? Is - it physical hardware or software?

  I understand that your copies have vertical lines through them. I have a useful document that might help.

  Click here for the document.

  Let me know if it helps.

• HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

  1 HP Photosmart C5380 all-in-One Printer

  2. Windows 7 64 bit

  3. no error is, as usual but preview and print with a dark gray line / think through the page.

  4. I got a new monitor.

  How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

  When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

  

  bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

  Hard Reset:

  * Unplug the unit while the printer is on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug power back in and make sure that the device is running

  So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

  http://support.HP.com/us-en/document/c01887471

• Text flow create a delay when an overflow creates a new page, which prevents you from reading the page number, in error

  Hi all!

  I create a script to automatically generate a catalogue of photos; the idea is to prepare a master document with a text block in the master full of self flowing, then insert images with their legend by the script, let the system automatically creates the following pages when necessary, by a single stream of text.

  My catalog is divided into sections, each represented by a different master spread; So I know what page I work when the script put there a picture just to link the current page in the master spread appropriate.

  To simplify what I got most of my script here, using text instead of images:

  / * load a master document, only containing a block of empty text in the master spread, connected to the main text stream * /

  var doc = app.open (new File("~/Desktop/mySampleDoc.indd"));

  / * I'm working on the story, thinking that every time that the textframe of first page will be full, we will create another block of text on the next page (automatically created) * /

  var history = doc.pages [0] .textFrames [0] .parentStory;

  / * now, I put a few lines of text in history, pending the creation of a new on the first page will be complete * /

  for (var i = 0; i < 100; i ++) {}

  / * This is the following line: * /.

  .silence story.insertionPoints [-1] = "This is line n." + i + "\r";

  / * here, I want to know what page is the line just created (the error is generated here just in the creation of the new page + block of text) */

  Thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset;

  / * and now I print the page number * /.

  story.insertionPoints.item(-1).contents = "current page:"+ thispage + "\r"; ".

  }

  The big problem is: when the first block of text is full and overflow is generated, a new page with a new block of text from the main text flow (as the master spread) is generated. but it seems my script requests the page number before the new page with the new text block is born and an error is given.

  It seems that the script goes too fast regarding the creation of the new page.

  If I remove the line thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset; everything is ok.

  I tried to introduce a delay up to 3 seconds with no effect.

  I tried also to view or zoom in the request of page number, thought new page to force the system to wait for the page is truly born, also without effect (by the way, I wasn't able to view the page in adding the script of the text!).

  Can someone help me?

  A big thank you to everyone

  Roberto

  Have you tried using myDoc.recompose () before the application for compensation?

• HTML/CSS code for the length of the line on the pages.

  Quick question for anyone who wants to help. I need to cut down on the length of the line on some of my pages (on the pages of report under the table of the contents of the navigation tab). I'm pretty good with the coding, but for some reason I can't it works. Thanks to you all.

  Site URL: litterdatas.com/businesscatalyst.com

  Hello christevenson,

  Looks like your template is missing a div or two. If you wrap your page content in the div:

  {tag_pagecontent}

  It will focus your content and give it a width of 940, as well as the white bg. If you then change the color of your text.

  If you don't want the white bg, do not use id = div surrounding 'main '.

  This should fix the length of your lines.

  You can also use

  ,

  Tags for paragraphs and topics instead of just using bullet points for the content of the page.

  Hope this helps,

  Chad Smith | http://bcgurus.com/Business-Catalyst-Templates for only $7

• CFDOCUMENT cut the last and the first line in the pages

  Hello, all:
  
  I use the CFDOCUMENT tag to create a pdf file. It's a line of simple text and images (for example, width = height 58 = 58). All right,
  but the last line and the first line fell by half. The line is half pages.
  I have download correction [hf701 - 60212.zip], but have the same problem.
  
  Please tell me how to set the page layout?
  I use windows XP. the text is displayed as < PRE > tag, pictures < IMG SRC = "" * "width = height 58 = 58 >."
  
  Kind regards
  

  There are several fixes to this problem. Latest fixes just be published in the last several days. If you use cfmx7.01, you must apply the hotfix in this technote. This fix should be used even if you have applied the hotfix rollup 2 for 7.01 or you apply the individual hotfix (hf701 - 60212.jar) prior to 04/08/2006.

  If you use 7.02, you must apply the fix of this technical note. Apply the additional fixes to cfdocument, he released with 7.02.

• where is the page reload option toforce of a new page online

  I am downloading of pages updates on my site, but it seems that firefox is the reading of my computer, but not from my Web pages online, there was once a choice recharge with a right mouse on the page and also under view but with 33.1 I use firefox I don't think this choice. I checked that the new pages are there but the old pages that I need to see with do not update.
  Wendy

  Try {Ctrl + F5} to bypass the cache and reload from the server.