Which router is the most stable and the most suitable?

Similar Questions

• When I try to connect to my router wirelessly from my laptop and the room, he asks for my network key and I don't know what it is.

  my brother used to all our computer equipment set up and he died last year. Well when I moved and tried to get into my new place it will not allow me without a network/wpa key. I know that I am trying to connect to my router and not my neighbors because when I unplug it it's the only name that disappears from the list of wireless networks. How can I know what is the network key or even set up a new? I am a bit technologically with faculties weakened to get detailed instructions on how to help me would be appreciated, but any help would be great.

  I'm sorry for your loss. Since we do not know how your brother to set up the router, it would be better to start again just to make sure that your wireless network is secure. Reset the default router. This is usually done with the wired router (on) by pressing a small button on the back or the bottom of the router, now the button for about 30 seconds and then let go. You can find the manual on the router mftr's Web site. your router if you need it.

  Once you have reset the router to default, set up correctly:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• I get a notification to update when you sign in to firefox. When you try to update you get the message "connection to Server", which can go about 4 hours and never update

  I get a notification to update when you connect to firefox on my mac. When you try to update, I get a message "connect to Server" which can go over 4 hours and never update. It is most annoying. How can I remove that annoying popup which does not in any case all in ensuring that I have updated to the latest version?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• How to display prices with which we won the most?

  Hello guys!

  I try to learn a few new skills in oracle sql if I was looking for examples on the web. I found this one, with 6 questions. I did all the tables and all the connections. I knew solve 5 questions but that, finally one seems too difficult for me.

  I don't know how to display tables with which we won the most. We do need to check what Denis is rendered which course and anyone who paid that invoice, what kind of prices was also on this Bill (normal od student).

  I would be really happy if you guys could help me.

  Thank you very much!

  Here is the printscreen of my E-R model and my oracle sql code:

  http://imgur.com/oM5IbTL,
  http://pastebin.com/c1CqF3K8

  If you don't understand anything, despite my bad English or anythning else, feel free to ask. I would be really happy if we could solve this problem!

  As far as I know, bill and section have no impact on this problem.  As Frank said, this looks like a Top - N type problem.  You is a way to get answer:

  dev1 > select gains, num_students, lesson_name, course_name

  2 from (select course_name, lesson_name, num_students, gains,

  3 dense_rank() ON rn (salary desc order)

  4 of (select c.name course_name, l.lesson_name,)

  5 count (vr.id) num_students,

  6 sum recipes (p.price)

  7 of course c

  8 Join Conference l

  9 l.fk_course = c.id

  Join the 10 visit vg

  11 on l.id = vg.fk_lecture

  join 12 visitor RV

  13 on vg.fk_visitor = vr.id

  price of 14 p join

  15 p.fk_course = c.id

  Group 16 by c.name, l.lesson_name))

  where the 17 rn = 1;

  LESSON_NAME NUM_STUDENTS PROFIT COURSE_NAME

  ------------------ --------------------- ------------ ----------

  C++, programming 3 750 programming

  Java programming programming 3 750

  If you really don't want that one line returned with a tie, then you replace dense_rank, row_number or do something like:

  Select course_name, lesson_name, num_students, recipes

  from (select c.name course_name, l.lesson_name,)

  Count (VR.ID) num_students,

  Sum revenue (p.Price)

  of course c

  join the l Conference

  on l.fk_course = c.id

  Join visit vg

  on vg.fk_lecture = l.id

  Join the vr visitor

  On vg.fk_visitor = vr.id

  Join the price p

  on p.fk_course = c.id

  C.name group, l.lesson_name

  order by 4 desc)

  where rownum = 1;

  This structure returns a single line in the case of links, but there is no way to predict which of the related rows will be returned.

  John

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.

• My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  If she needs your Apple ID password and you have enabled 2-factor authentication, you might have to temporarily disable the connection to complete.

  Also, you need an internet connection to perform this step here.

  If your problem is not of the above, please describe more completely. Furthermore, to give specific messages on the screen.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  I changed the my imac with a new drive and I lost the original CD/DVD which came with the new Mac.

  and when I go to install the mac lion antiracism apple with reticle logo means error

  what can I do with these

  Please help money

  You can get the replacement system install & Restore CD/DVD of the customer support of Apple - to the United States, (800) 767-2775-for a sum low S & h. you will need to have the model or the serial number of your Mac available.

  If you are not in the United States, you may need to go through the regional Apple Store that serves your location to find the phone number. Here is a list of links to all - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html , another resource: International Support Phone #s.

  

• (I am in China and on the front is partly in Chinese.) I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears.

  Dear Firefox support, I am in China, and the first page of my Firefox screen is partly in Chinese. I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears. I downloaded a new version 5, but the mandarin (and the associated statement bar) still come in Mandarin. How can I download a really English version?

  You can choose your language installation of this list: http://www.mozilla.com/firefox/all.html

• 'My card' when contact is not me, and it won't let me change it or delete the info. for the person mentioned (which is having the same first name as I do). Any ideas?

  'My card' when contact is not me, and it won't let me change it or delete the info. for the person mentioned (which is having the same first name as I do). Any ideas?

  iPhone OS 9.2 6.

  I already tried to delete information about the person identified as "my card". Because the phone think it is 'my card' delete the contact and/or modify the information. does not work.

  Create a new contact with your correct information, who like 'My card' to:

  Settings > Mail, Contacts, calendars > Contacts > my info

• I have two reqwork and mycleanpc, downloaded on my computer which 1 is the best 1 for me to keep

  I regwork and mycleanpc.com downloaded on my pc.i want to know between the two of them which 1 I should keep and which 1 should I uninstall.which 1 is the best 1 to keep.thank you

  Hello.

  The answer: NONE of them.

  Registry cleaners / tuneUp Utilities programs are a waste of time and money and can do more harm that any who they claim to be able to do.

  See you soon.

• When I try to open Firefox and explore, I get a menu of recommended programs and asked me to choose the program with which to open the file.

  Original title: open Firefox and explore

  When I leave early to Mozilla Firefox or Explorer, I get a menu of recommended programs and asked me to choose the program with which to open the file. When I do, I get a security warning asking if I really want to do. If I check "Run", I get redirected to the previous list, and I find myself in a circle without end. It does not matter what choice to make. Used to be that I went from starting Firefox directly.  I can get in if I have Firefox right click and choose to run the file as an administrator and then give permission to open the program. How can I cut these two additional and direct access, that I used to enjoy. I run Vista. The same thing happens if I have to explore. Would be grateful for the help.

  Hello

  1 during how long have you had the problem?
  2. don't you make changes to your computer before the problem?

  I suggest that you follow the steps below and check if the problem persists.

  Method 1:

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505
  Method 2:
   
  Step 1:
   
  Make SFC scan and check if this is related to missing or damaged system files.
   
  Step 2:
   
  After the SFC scan, set the file association and check.

  Method 3:

  Test the issue in a new user account .
   
  See also:
  Difficulty of damaged user account

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  I have formatted my system and windows reloaded. Then, I clicked on it somewhere (do not remember on which/wher) now the systym not to see any how removable storage or don't want even to open a CD I put in...

  As you reinstalled just Vistas, you would have a very limited number of Restore Points!

  Try the system restore.

  If this does not work, and you don't know what you were doing, reinstall it again.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner