Which - S10-3 lid hinges black and gloss black?

Similar Questions

• Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error.

  Hello

  Every time I close my laptop and he goes to sleep, when I reopen it the lid it restarts and I get the following error. Can you please help? Thank you!!!

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA8004AC8A10
  BCP3: FFFFF80004053518
  BCP4: FFFFFA8009274DC0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\WINDOWS\Minidump\092812-30045-01.dmp
  C:\Users\Kevins\AppData\Local\Temp\WER-78078-0.SysData.XML

  The minidump files showed a DRIVER_POWER_STATE_FAILURE (9f) persistent stop error that seems to be caused by the Netwsw00.sys:

  BUCKET_ID: X64_0x9F_3_Netwsw00_IMAGE_pci.sys

  The Netwsw00.sys, which is dated March 12, 2012 is a driver for Intel wireless network adapter.

  Even if it's a fairly recent version of the driver I would suggest trying the following update utility from Intel and of whether there is a newer version available and, if so, install the:

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

• My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  My 4th generation Apple TV installed an update and asked my password which he refused to accept time and time again. How to go beyond this screen and reset the unit?

  If she needs your Apple ID password and you have enabled 2-factor authentication, you might have to temporarily disable the connection to complete.

  Also, you need an internet connection to perform this step here.

  If your problem is not of the above, please describe more completely. Furthermore, to give specific messages on the screen.

• I have an oval window on my desktop (Mac), which sets out everything I do and he's also very strong! Malware? Adware?

  I have an oval window on my desktop (Mac), which sets out everything I do and he's also very strong! Malware? Adware?

  If it looks like something like this, you have probably enabled VoiceOver.

  

• I get a notification to update when you sign in to firefox. When you try to update you get the message "connection to Server", which can go about 4 hours and never update

  I get a notification to update when you connect to firefox on my mac. When you try to update, I get a message "connect to Server" which can go over 4 hours and never update. It is most annoying. How can I remove that annoying popup which does not in any case all in ensuring that I have updated to the latest version?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• (I am in China and on the front is partly in Chinese.) I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears.

  Dear Firefox support, I am in China, and the first page of my Firefox screen is partly in Chinese. I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears. I downloaded a new version 5, but the mandarin (and the associated statement bar) still come in Mandarin. How can I download a really English version?

  You can choose your language installation of this list: http://www.mozilla.com/firefox/all.html

• no more WiFi which extends from the airport express and Time capsule

  I have no more WiFi which extends from the express airport and Time capsule.

  and once it worked...

  airportconfiguration-app also works, but the graphic display allows to have a straight white line. now, it's one interrupted...

  Your unbroken lines in airport show connections ethernet utility... broken lines show the wireless connections.

  So it depends on the extend method you used.

  I think at this moment, things are configured wrongly... for some strange reason things happens and elements on a stand-alone basis, return to a default mode.

  The best way to manage it is full factory reset on everything... and repeat the installation.

  I have no more WiFi which extends from the express airport and Time capsule.

  It seems to me that you extend a NON-APPLE router... in this case, your Apple routers must connect by ethernet and create a wireless network. Routers Apple cannot extend the NON-APPLE router wired.

  The express could extend the TC or visa versa... by wireless...

  Then I suggest say us what is the main router in the network?

  You have connected by ethernet to the TC or Express or both?

  If so please reset completely the two elements and try again. Make sure they are in bridge mode... It's the network tab. Router Mode is turned off.

  

  And your wireless tab is configured to create a wireless network...

  Use the same name (SSID) and even the security setting and the password as the main router to network roaming (extend wireless ethernet).

  If the Express and transport CANADA are the same, both will have this configuration... If the express extends to wireless then it should NOT be connected to all the way to ethernet... (sequel to wan side at least) and it will be set to expand wireless on the wireless tab.

• KB982381 which replaces 980182, 978207, 976749, 976325 and native authentication from windows 974455 breaks Single Sign On

  I have proven tha the recently updated KB 982381 which replaces 980182,978207, 976749, 976325 and 974455 breaks single sign on for my domain. This process of Single Sign-On using Kerberos authentication to the people on an Oracle Portal newspaper. This works perfectly for each single user... As long as we do not install these updates. Each month, we must keep remove these KBs. The thing is I don't want to continue to do that I have not WSUS. In addition, I would quite be able to upgrade my computers without breach of SIngle Sign On. That everybody knows or has information on what could cause this problem?

  Contact the Support of Oracle and your MS TAM.

  No computer must be connected to the internet without security for IE installed the latest update!

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I find out which updates installs successfully on stop and then install?

  My (6) updates are not installed when I shut down my computer. This has happened for several weeks. I do not force stop or unplug it. I can't understand who (s) update by installing does not correctly. How can I find out which updates won't install correctly and then install them?

  View update history.

  For Windows Vista:
  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  For Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  For Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  For Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  TaurArian [MVP] 2005-2011 - Update Services

• 64 bit sytem with vista home premium which has been randomly locking up and freezing. The error is event 6008.

  I have an ACER aspire x 3200 64 bit sytem with vista home premium which has been randomly locking up and freezing. The only mistakes were event 6008 with a description of the stop system prior to (time) on (date) was not planned.
  When these errors originally occurred, I returned the system to acer and they installed a new hard drive. After updating the vista system blockages continue 30 times over a period of 3 months. Acer sent me a new disk image on 3 disks that I have installed and updated on 11 October. There is no blocking until the 10/27, 10/28, and for the 3rd time today.
  The closed unexpected gives a blue screen if I use the locking system to the top. I have to hold the power to restart when the system crashes.
  Can someone help me solve this problem?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.  But I guess it's too late for this for so long that there are probably no so old restore points.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer on the stop (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.  From what I understand, there is none of the events (which surprises me because a freeze should certainly generate an error event).

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work (but you NEED a disc).  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  * Original title: Windows 7 - CD to USB

  I bought Windows 7 (the two CD 32 & 64) many years for use on my early 2008 MacBook Pro, with an optical drive, via BootCamp. It worked very well.

  Now I have a new MacBook Pro without optical drive, but would like to install BootCamp and use Windows again.

  How can I put Windows on a USB key which will be bootable by BootCamp and how transfer the activation code?

  Thanks in advance for your help.

  Use Rufus:

  Rufus - create USB bootable the easy way discs

  Another solution:

  http://www.AddictiveTips.com/Windows-tips/create-bootable-Windows-7-USB-flash-drive-from-DVD-disc/

• Y at - it a keyboard shortcut, which moves the item target upward and down channels?

  Y at - it a keyboard shortcut, which moves the item target upward and down channels?

  Open KBSC and type UP (or DOWN) in the search.

• Is it possible to group objects, which are placed in the project and then hide them with line a single action-script? THX in advance, Philip

  I work in CP 9 and I'm going to try the following: the user must be able to make ALL invisible or visible to highlight boxes by clicking on the corresponding button on the first page layout. Thus, for example, if the user does not want the highlight boxes appear, click on "Hide the boxes" and boxes are hidden for the rest of the project. I managed to get to this point for help... but it is still a lot of work for me to manually enter all the different names of these boxes in the action-script. So my question is: is it possible to group objects, which are placed in the project and then hide them with line a single action-script? THX in advance, Philip

  Actually... releasing the CpExtra HTML5 widget, it will be possible.

  It has a function called @syntax that allows you to perform an action (for example HIDE) automatically on any object throughout a project of Cp9 simply based on the name of the object.

  So for example, if you named all the boxes to highlight you want hidden this way to have the suffix _HideMe and you say CpExtra you want all of them hidden if a user variable is assigned to a certain value, then that is what will happen.

  That's the good news.  The bad news is that the widget is still in BETA final tests at the moment, so you may need to wait a bit before you can realize your idea.

• Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the plan tab Cancel in adobe India website

  Please help to cancel my subscription of single-app creative cloud for Acrobat Pro (at least) which has been subscribed by mistake and now I am penalized for her 3 months. Cannot find the tab cancel the plan to manage the website of adobe India tab. Help, please...

  Cancel your membership Adobe Creative Cloud

• Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

  Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

  By default, LR saves all changes in the catalog, and that applies to any type of file.

  Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

  But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

  Unless you do this, the changes are saved only in the catalog.

  Hope this makes things clearer.