Which would not hit me a VPN connection website?

Similar Questions

• How to get a hp 4600 Color Laser jet print on a vista or Windows 7 64 - bit OS PC which does not have a parallel port connection?

  My hp 4600 color Laser Jet uses a parallel cable to connect to a Windows PC. When I had XP as the OS it worked fine. But now after the upgrade to Vista or Windows 7 64-bit OS it will not work and my PC does not even recognize it when it is plugged into the PC with the parallel to USB cable that worked so well before. So, what should I do to get the PC to recognize the Hp 4600 and have it printed again as before? (My first plan is to try to get the printer to work by hooking up through Wireless. Does anyone know if it will work? I'll answer my own question, if it does. Wish me luck! (Thank you!)

  According to the HP support site, there are drivers available for Vista and Windows 7 If you're lucky it. Download the appropriate drivers for your computers. According to the information of product from HP, this printer can be connected directly to the network by an ethernet cable. I don't see where it has wireless capability, but in any case ethernet is preferable for printer connections if possible.

  Connect the printer directly to your router or switch connected to your router and assign a static IP address outside the range the router DHCP. Then, install the drivers that you got from the HP website for your operating system.

  MS - MVP - Elephant Boy computers - don't panic!

• Is there a paper which would give a specific time for each website visit - revisit a website via the history seems to adapt the list?

  I am disputing the exact time that I visited a site Web - but because I revisited the sit by searching in history & clicking through the appearance of the new visit seems to replace the old in history.

  Hello, try the tool view historical mozilla : http://www.nirsoft.net/utils/mozilla_history_view.html

• Impossible to establish a VPN connection with a router configured as a Cisco server using client VPN 5.0.00.0340

  Hei guys,.

  Please help me on this one because I'm stuck enough on her...

  I am trying to connect to a Cisco 3700 router configured as a VPN server by using a VPN client and the VPN connection does not settle.

  This is an extract from the log:

  130 12:48:30.585 07/01/11 Sev = Info/5 IKE / 0 x 63000001
  Peer supports XAUTH
  131 12:48:30.585 07/01/11 Sev = WARNING/3 IKE/0xE3000057
  The HASH payload received cannot be verified
  132 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300007E
  Failed the hash check... may be configured with password invalid group.
  133 12:48:30.600 07/01/11 Sev = WARNING/2 IKE/0xE300009B
  Impossible to authenticate peers (Navigator: 904)
  134 12:48:30.600 07/01/11 Sev = Info/4 IKE / 0 x 63000013
  SEND to > ISAKMP OAK INFO (NOTIFY: INVALID_HASH_INFO) for 200.100.50.173

  I enclose the whole journal extract... The message "BOLD" is quite obvious, you mean, but I'm 100% sure, in the login entry, I typed correctly the group password: pass

  My topology is very basic, as I am setting this up only to get a clue of the operation of the Cisco VPN. It is built in GNS3:
  -2 3700 routers: one of them holds the configuration of the VPN server and the other would be the ISP through which the remote worker would try to establish a VPN connection. I am also attaching the configuration file for the router configured as a VPN router.

  Behind the second router there is a virtual XP machine on which I have installed VPN client...

  My connection entry in the customer is to have the following parameters:
  Host: 200.100.50.173 , //which is the IP address of the VPNServer
  Authentication-> authentication-> name group: grup1 password: pass / / I'm quite positive that I typed the correct password... even if the log messages are linked to a misidentification.

  I use public addresses only, because I noticed there is a question about behind the NAT VPN connections and is not not very familiar to the NAT.

  Another aspect which can be of any importance is that "allow Tunneling of Transport" in the tab Transport to the input connection is disabled

  and the VPNServer router logs the following error message when you try to establish the connection:

  * 01:08:47.147 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  * 01:08:47.151 Mar 1: % CRYPTO-6-IKMP_NOT_ENCRYPTED: IKE 200.100.50.34 package was not encrypted and it should have been.
  

  You have no idea why I can't connect? Y at - it something wrong with my configuration of VPN server... or with the connection entry in the VPN client?

  Thank you

  Iulia

  Depending on the configuration of the router, the group name is grup1 and the password is baby.

  You also lack the ipsec processing game that you would need to apply to the dynamic map.

  Here is an example configuration for your reference:

  http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080235197.shtml

  Hope that helps.

• Try to create a new VPN connection but Creat new network connection is grayed out

  Hello world

  Thank you for your help in advance.

  I would like to ask why I could not create a new VPN connection as the "Creat new network connection" is grayed out. I'm also sure that remote access connection manager, and another car once are started.

  I can create an account with my domain administrator account. But once I passed the orginary user, the shortcut to the connection could not be accessed. I also tried to add the user to the local Administrators group, and the result is the same.

  HOEP that you can help.

  Thank you.

  Windows XP Service Pack 3?

  Do you have any software security 3rd party running on this computer?  Or maybe something in group policy that limits access to create a new network connection?

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• How can I connect to my server (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?

  Hello

  How can I connect to my sServer (which runs on windows server 2008 rc2) via IP REAL using rdp, while the VPN connection is active?
  

  Hello Marie Smith.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Hope this information helps.

• IBM ThinkPad T42 would not connect to my home network secure wireless

  Configuration IP of Windows __An internal error has occurred: a device attached to the system is not functioning. __Please contact support services technical microsoft for more help.

  Others have had a similar problem, but I tried the solutions that have worked for them, without success.

  All of a sudden, my IBM ThinkPad T42 wouldn't connect to my home network (WPA2-PSK) secure wireless.  It would be either (1) stay in a constant state of "acquiring network address" or (2) do not recognize networks wireless in the range.  Sometimes, it would connect to a nearby unsecured network, but the network would still not appear in the list of available wireless networks.  So I tried to connect directly to the ethernet, which also did not work.  I then ran the ipconfig/all command at the command prompt and got the message:

  Windows IP configuration
  An internal error has occurred: a device attached to the system is not functioning.
  Contact support services technical microsoft for more help.
  Additional information: unknown media status code.

  So, I went to Microsoft Product Support Services, which does not seem to offer all the solutions.  I searched this error online and found several similar problems - some users had problems with viruses.  Some users had winsock2 corruption, and some recommended to reinstall the drivers for my network cards.  I'm computer literate, but not a computer Wizard, so I was able to follow their instructions for checking the winsock2 corruption (I think), and I think it's very good.  I did a complete scan of symantec, but who came with nothing.  I downloaded the drivers for my network cards which are: Wireless - 11 a/b/g Wireless LAN Mini PCI Adapter, ethernet - connection of a Mobile Intel (r) PRO/1000 MT and was able to update my wireless driver, but not the driver ethernet.  The latter Assistant said we "could not find a better match for your hardware than the software currently installed".  I had wireless internet to work for a few hours last night, even if I still have the same error message when I run ipconfig/all.  I started my computer this morning, and the same problem again - constantly says "address of network acquisition" even if no wireless networks are appearing on the list.  Also, I tried the system restore to see if I could go back before the problem started, but after that I tried several dates, System Restore has still not successful - it wouldn't work again.

  So now, I have my computer in safe mode, and it is connected to the wireless internet, even if the ipconfig/all command still gives the same message, and I am running symantec again to see if I can find something!

  Please help me!  If you think that I may have missed something with the winsock2 or installing drivers, or if there is something I could not find on the internet, please let me know!  I'll try anything.

  Note: I have Windows XP Professional Service Pack 3.
  Network card drivers, I'm running are:
  Wireless: Date - 02/05/2007, Version 4.1.2.156, provider - Atheros
  Ethernet: Date - 24/10/2006, Version 8.7.9.0, provider - Intel

  Thank you!

  Update: when I disable the Intel PRO/1000 MT driver, I can run ipconfig/all with success.  Then imagine it's something to do with this adapter or the driver.  Any ideas?

  OK, so here is what I did to solve this problem.

  I've updated to the latest version of the IBM BIOS

  Then get the WLAN driver from the manufacturer, NOT IBM, NOT Windows Update. Depending on your card, it will be Cisco or Intel.

  I can not stress enough that updates to IBM and Windows update does not work and I lost a lot of time. However, once downloaded directly from the manufacturer (new version) worked flawlessly!

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• VPN connects not to Linksys 10/100 4-port VPN Router with ASA 5505

  We are trying to get a new ASA 5505 implemented on our network after the untimely demise of our router from 1841.  One of the functions of the router that we go back to the top and the race is a pair of VPN for employees that we were working outside.  These are site-to-site virtual private networks.

  They worked with the 1841 in place, so I know the other end works.  I just have configuration problems the ASA to match.  I have been through the wizard in ASDM a couple of times, but have yet to have a bit of luck that it connects.

  Attached are the configuration files for the 1841 (with two virtual private networks) and the 5505 (with only 1 VPN in place).  Can someone help me with what I may be missing to get this working?

  A note: I am having trouble with my NAT (another post in the meantime) configurations, but I think they are close enough that I hope that is not interfering with the VPN.

  If I can get one running, the other has an almost identical game, so I should be able to get the second pretty easily.

  Any thoughts?

  Thank you

  Matt James

  Hello Mjames,

  We hope that you do very well, just to confirm the previous post that I answer for you.

  You need to change the NAT 0 configuration

  NAT (outside) 0-list of access outside_nat0_outbound

  This is the rule against the nat for VPN, please change it to:

  NAT (inside) 0-list of access outside_nat0_outbound

  I spent reviewing the configuration of both devices and which seems to be the only problem

  Please evaluate the useful messages.

  Julio

• iPhone 7 - 10.0.2 - would not connect to wifi - got hot - DEATH

  I have an iphone brand new 7 (black) who has not seen a bump, the knock, the drop of water, or frankly anything that could damage it - always used with Chargers apple and cables only. I came home one day and noticed that my wifi woulndt connect. He would not even see the networks. The phone started to get hot and the battery percentage began to collapse, down 80% to 0% in about 15 minutes.

  When I tried to reconnect to the power, it will not even turn on, nothing, no display showing load or anything like that. Just completely dead.

  Ive owned every single iphone (except some S models) and have never had this happen. In fact, I could plug in my iphone 3gs right now and I'd be willing to bet $100 it load up and turn right into. Im just stunned, having given apple credit both for making bulletproof devices for years.

  What's the deal? anyone else having this problem? Ive looked online and I can't find anything. I have a genius appt tomorrow and Im prayer I can get a replacement same day. I have applecare +.

  Thank you

  George

  If there is something wrong with the device, Apple should replace it. However, they have the final call, and no one here can say exactly what they will do. Given the age of the unit, I suspect that you won't have problems getting a replacement. They should have stock for replacements. I wouldn't worry.

• VPN connection but smb://server does not exist

  Hello guys,.

  I'm having a problem with my Mac.

  I have configured a VPN server (work) and connectd normally.

  

  However, when I look at the list servers, in search, the server do not appear:

  

  And when I try to connect using the finder (go > connect to server) the following message

  

  Could you help me?

  BdW

  TKS

  Hello does not work through a VPN tunnel. You identify the server by its numeric IP address or a FQDN name.

• Is it possible to incorporate a note in a formula? In other words, to insert text which would be ignored by the formula processor?

  Is it possible to incorporate a note (a comment text) in a formula? In other words, to insert text which would be ignored by the formula processor?

  None

  You can attach comments to a cell:

  

• Updated IE7 to IE8 and lost my network connection, get the error "network cable is unplugged" which is not

  After upgrade, network display icon with a red X through it indicating "network cable is unplugged" - which is not.  System Restore gave me back IE7, but without two of the toolbars (I've since found the fix for this - but too late).  Tried a system restore and now completely lost internet connection - IE will not launch.  Always get the message "network cable is unplugged".   I have reset the modem, but nothing works... should I ask Microsoft, HP, or my service provider (Rogers)?

  Thank you

  Christine

  Hello MsC_99

  Check the modem on the back of the system where the cable ether net branch. Think you that shed light on this subject? If this is not the case then you may have a problem with the NIC or ether net cable may have problems. If you do this then try uninstalling and reinstaling the NIC in Device Manager. If you don't see the network adapter in Device Manager then try booing the system BIOS and make sure that he is seen here. Let me know what you find. Thank you.

• My mfc 3360C will not scan to my computer. my ink is almost empty, which would prevent the printer to scan?

  My mfc 3360C will not scan to my computer.  my ink is almost empty, which would prevent the printer to scan?

  Hi Jmaccoux,

  ·         What happens when you try to scan? You get no matter what error code or error message?

  Empty ink does not prevent the printer from the analysis of the files or documents.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to uninstall the currently installed drivers and install compatible drivers with the operating system from the link of the manufacturer provided below. Check if installation of the printer from the link below drivers pass solve you the problem.

  MFC - 3360C

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc3360c_all

  You can also see the following articles for more information on the analysis of the issues:

   

  The problems of scanning

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

   

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions

  Method 2: If the steps above do not help, unplug the printer from the computer, uninstall the drivers for printer and re - install the same thing again.

  To uninstall the drivers,

  a. open programs and features by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  b. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Check out the link for more details below:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  To install a program, see the link below:

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Let us know if that helps.

• I am trying to create a VPN connection, but it does not work

  I am trying to create a VPN connection, but it does not work
  The wizard cannot establish a connection. And if I try to record simply does not connect
  It does not work. If I try to click on find the problem, there simply
  do nothing.
  I tried it on another pc, where it worked. So the problem is not the
  router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.

  It does not create even a the connection icon
  Thank you

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner