While a Dell 946 printer

Similar Questions

• REFERENCE DELL 946 PRINTER WILL NOT PRINT

  DELL ALL IN ONE PRINTER 946 STOPPED WORKING JUST OUT OF THE BLUE

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        You are able to print a test page?

  ·        What happens when you try to print?

  ·        What application you use to print?

  As noted by Richard G. Harper, try to print the test page and check if the printer works fine or not.

  Method 1:

  Maybe it's that the printer drivers have been corrupted. I suggest you to uninstall and reinstall the drivers and see if the problem is resolved.

  Note: Uninstall the driver and the software that is installed on the system.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&CS=19&l=en&s=DHS&ServiceTag=&SystemID=PRN_ALL_A946&OS=WLH&OSL=en&CATID=&impid=

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

   

  Method 2:

  I suggest you to uninstall the printer and reinstall the system and check.

  Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Method 3:

  I suggest you run the printer Troubleshooter and verify.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error cartridge on the Dell 946 printer all in one

  I get an error "cartridge #1203" and I can't understand what it is.  I replaced the cartridges, restarted the printer, tried new cartridges, etc... and I don't know what means this error.  any ideas?

  Error 1203 is an interesting error code. Here's what I discovered on error 1203

  It is average your cartridges of overflow of nine cartridges after a several impressions or all after you filled cartridges. Check to see if the ink are smeared on the holder where the contact panel with the cartridge. I have the same problem which I think lexmark has a problem and forget.

  Solution:
  I use the klennex with a few drops of water to moisten and cleanse back them on my printer work and support.
  The charging of ink work very well if you let it sit 24 hours. Then before you print anything, you must run aligned the cartridges once or twice then run once or twice cleaning cartridges.
  Print the test page to see how it's look and the way you're going.
  Be sure to not leave the debris of the klennex on the door panel.

  To reset the error code, unplug the power cord to the wall. Also remove the power brick to the back of the printer for 60 seconds. Then connect everything again.

  Dell series 5 ink cartridges have a sensor to them that cannot be reset. Article on Dell ink cartridges filling .

  Dell series 5 ink cartridges can be purchased at Staples, Wal-Mart or any Dell website.

  Rick

• My Dell 946 Printer is not communicating with my computer. I have a Dimension 4700. My documents are lining up in the print queue, and it is not printing.

  I tried a lot of things
  -disconnect and connect my computer
  -Uninstall and installation of my computer
  -using Device Manager to reset my printer ports.
  Nothing works

  Hello Lsnnj,

  Thank you for your message.  It could be a few reasons that this is happening, try them next steps.
  1. click on 'Start' > right click 'Manage' > click the (+) sign next to "Services and Applications" > click on "Services" below
  On the right, highlight it, and then double-click "print spooler".
  Make sure that the Startup Type is set to automatic
  On the "" Connection tab and make sure that the Local System account is selected, and also that allow the service to interact with desktop is activated.
  Below, you will see the hardware profile. Make sure that this option is enabled, if it is disabled, select the profile, and then click the Activate button.
  Restart your computer and test the printer.
  If this does not resolve your problem, try to go to the website of the manufacturer of your printer and download/install the latest drivers for your printer.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I have a Dell 946 AIO printer and downloaded the player to a file on my HP Pavilion laptop. Now... What should do?

  I downloaded the driver, but he went in a Dell folder on the C drive and I have no idea how to go read/install the driver in the right place to allow the computer communicate with the printer to the computer.   Dell 946 AIO printer is not on the list provided by the automatic installation.

  DenaRhey,

  Try to watch...

  Dell/drivers/C: /.

  Pilots should be there. Double-click the drivers and it should try to install. If not, look for the configuration file in the unzipped folder.

  Rick

• How can I get a driver for a Dell AIO 946 Printer?

  Original title: pilot

  The Dell AIO 946 Printer is not a driver. How can I get a driver for this printer?

  From Dell.

  http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_ALL_A946&OS=WLH&OSL=en&CATID=&impid=

• Dell 1720dn printer, how do I reset to DHCP for IP fixed

  I have a Dell 1720dn printer connected as a network suspended my modem/router printer and with a fixed IP address.

  I changed just my ISP and don't have a fixed IP and therefore need to change my printer to enable DHCP.

  I see no way to do another that uninstalling and reinstalling the printer... or am I missing something?

  Thank you for any halp

  If you always access the printer web server you can change the DHCP IP address in network settings. Otherwise I would try a factory reset the printer and it should return to the DHCP:

  Turn the printer off

  Open the access cover to the printer

  While you press and hold the continue and cancel re - turn on the printer

  NOTE: the lights will be put a few times

  After the error light turns on and stays on

  Release the continue and Cancel buttons

  Close the access cover

• Reference Dell 946 AIO windows 7 64 bit, after installing AIOC.exe has stopped working

  I was extremely upset with this problem and it seems that there are tons of discussions but none of the solutions work for me.

  I have a Dell AIO 946.

  Windows 7 64-BIT fully updated

  I installed win 7 64 driver (5 or 6 times now)

  Prints perfectly fine, when I want to Dells Aioc.exe I get the AIOC has stopped working.

  I tried the new installation after using the same thing Cleanup utility.

  usb ports modified, usb ports set to not go to sleep to save power

  The player is R145441 on dell site.

  Here is the log for when the error Stops Working:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: dlciaiox.exe
  Application version: 3.57.0.10
  Application timestamp: 4549c5c0
  Fault Module name: ntdll.dll
  Fault Module Version: 6.1.7601.17725
  Timestamp of Module error: 4ec49b8f
  Exception code: c0000005
  Exception offset: 0002e41b
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  I want to scan to PDF and cannot do with this defect of AIOC program!

  I never had so many problems with my HP they did it is super simple!  Help, please!

  Yes, all updates are performed.

  Here's what fixed it in case someone needs to know

  Right click on my computer

  Go to the properties

  on the left side, click on advanced system settings

  Under performance, click settings

  On the Data Execution Prevention tab

  Select turn on DEP for all programs and services except those I select

  Then add

  Then navigate to the folder c:\program Dell AIO printer 946\ printer Dell

  Add all of the files that are displayed

  There was some prob 8 of them... then it worked perfectly.

• How to see the level of ink for a dell v515w printer?

  Separated from this thread.

  How to see the level of ink for a dell v515w printer?

  Hi Albert,

  I appreciate your time display. You can refer to the manual for more information. http://www.Dell.com/Ed/business/p/Dell-V515w/PD

  To better help, contact Dell technical support.

  http://en.community.Dell.com/support-forums/peripherals/

  Thank you.

• Where to find the drivers for the Dell J740 printer

  Device

  I have acqjuired a Dell J740 printer to replace a broken. I don't have the driver CD andcannot find the driver anywhere on the line that anyone has a solution?

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=125824#Issue0_3

• Dell 944 printer to copy and print very well, but does not scan

  Original title: Dell 944 printer

  My printer will copy and print, but will not scan.  We have recently received a new computer and downloaded all the updates.  I can't understand why I can print and copy but will not scan.

  Rhonda

  Rhonda,

  You have the OCR program installed?

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• try to reinstall dell AIO printer wizard does not recognize the installation disc w / my compatibility

  Have the disc supplied w/DELL AIO printer 944 photo. You need to reinstall.  Windows cannot check the logo test. What can I do?

  Hello

  1. What is the full error message?

  2. it worked very well?

  3 did you changes to the computer before the show?

   
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
   
   
   
  I suggest you to contact Dell technical support to check the new version of the software available.
   
  http://support.Dell.com/
   
   
  I hope this helps.
   

• My Dell V305 printer prints very small. How can I get to fill the page?

  My Dell V305 printer prints very small.  How can I get to fill the page?

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Method 2:

  See the articles and check if that helps:

  To set printing preferences

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_document_defaults_personal.mspx?mfr=true

  To set the properties of the printer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_printer_props.mspx?mfr=true

  Settings that affect printing

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_properties.mspx?mfr=true

• the dell photo printer 720 32-bit vista driver work with xp?

  the dell photo printer 720 32-bit vista driver work with xp?

  No, a Vista driver will not work with XP.

  Check the Dell support site to see if they have XP drivers for your printer.

  Reference Dell Driver Downloads:

  http://www.Dell.com/support/drivers

• Dell A920 printer/copier won't copy, but it prints from the computer fine. Any ideas?

  I have windows XP and a dell A920 printer / copier. It prints well but he will not make a copy. I need to copy a document and put it on the screen copy and press the black copy button and color copy copy and scan and none of the buttons seem to work. It was fine two weeks ago from ideas?

  See:

  http://en.community.Dell.com/support-forums/peripherals/f/3528/t/3328565.aspx

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&docid=267791&l=en&s=DHS

  To further support, post in the forums of Dell support:

  http://en.community.Dell.com/support-forums/default.aspx