While a single panel C309A does not

Similar Questions

• When I click on Power Options in the Control Panel, it does not. How can I cope?

  When I click on Power Options in the Control Panel, it does not.   How can I cope?

  When I click on Power Options in the Control Panel, it does not.   How can I cope?

  Make a check of the system files. It's to look for corrupt files. He will try to fix it if it is found.

  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  Question:

  Was there a time when the Power Options in the control panel was admissible?

  If Yes, how long?

  Would it be too long to do a system restore?

  System Restore requires you to choose a date where you did not have this problem as the restore point.

  You remember such a date?

  How the system restore...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• New document opens in the layers panel, but does not appear in the workspace

  new document opens in the layers panel, but does not appear in the workspace

  Could you please reset the Photoshop preferences once.

  Preference file functions, names, places | Photoshop CC 2014

• Photosmart C309a does not illuminate and its power adapter 0957-2259 LED flashes.

  I have a Photosmart all-in-in-one C309a.  A few days ago I started to receive messages from the ink system dailure, with the 0xc19a003e code.  I followed it to corresponding to a unit of printhead failed, so I ordered a replacement parts HP UK store on Friday, October 14, and it came today, Monday the 17th. Great rotation of the order of HP UK - thank you.

  When I came to adapt to the new print head today, the printer does not illuminate.  No sign of the power of the power button, the buttons command or display.  The power adapter (model number 0957-2259) has a green LED which was (and still is) very quickly - flashing several times per second.  After that the power had been in the power adapter for a while (several tens of minutes I think, I wasn't timing it) noise started coming from the inside of the printer.  It is a kind of regular knocking and seems to echo the led blinks - but there was still no sign of power - including no movement of the ink/printhead assembly.

  I tried to find suggestions online and I've seen a few posts on some websites that suggest that the adapter can be unloaded in some way - but they are almost exclusively on the PC.  Posts read as if there is some kind of capacitor which accumulates (too) charge and discharge it restores the adapter to the operating state.

  I just reconnected the power again to see if there is no change.  After about 10 minutes, hit him coming back for a few moments then stopped.  I noticed that the LED on the AC Adpater was green fixed so I tried the power switch on the printer and it began to start.  But then hit him came back, the display panel started flashing white light and then complete disappearance of signs of life (other than sound knocking, which became intermittent, maybe 5-15 seconds each time).  The LEDs returned to.

  And then after maybe 20-30 minutes with the power, the printer finally tried to start, the light of the AC adapter / CC has been stable and my computer thought that the printer was (briefly) online.

  But the adapter light started blinking and now the printer behaves as if it has no power.

  It seems to me that the symptoms is due to a problem with the AC adapter.  Then

  (A) that seems reasonable?

  (B) is there a way to release or otherwise 'fixing' the adapter?

  or (C) is it better/more safe to replace the adapter?

  TIA,

  Chris

  The adapter can be reset as described here.

• C309a does not print

  My C309a all-in-One printed perfectly for 1 year.

  I went to copy a letter on the glass bed. He looked at the print head printing, but the document was empty.

  I then tried to print a Word and a .pdf document. The paper loaded correctly and the print head struck that it was printing, but the document was empty. I replaced all ink cartridges. I removed and cleaned the print head. I ran a test print which was OK and made a head alignment. What impression over the small screen on the printer says "alignment failed".

  Someone know why does print not now when powered by my computer or will not print when copying from the top of the glass printer? Print head looks like it's printing but nothing on paper.

  This questions the printer head problem. see the following steps for cleaning print head:

  • Click the Start button, if you have Windows XP. If you have Windows Vista, click the Windows icon located in the lower left corner of your computer screen.
  • Click on "Control Panel", then "printers and other devices. Finally click on "View Installed Printers or fax printers."
  • Right-click on the name of your printer and choose "Printing Preferences". This should open a new window; Then look for a tab or button labeled maintenance, or something similar.
  • Find the button that says "Print heads" or "Clean print heads" and click it. You may be asked to choose the print heads; Choose them all if you are. Make sure that there is no paper and ink in your printer, and it is turned forward.
  • Remove the page that your printer has printed and see if there are the missing gates or boxes. If it does not exist, you can just exit the program - your print heads are not blocked. If there is missing grids, then click on the "cleanup" or even button labeled.
  • Once you have finished the cleaning, print another page to make sure that your printheads are is more clogged. If they are still clogged, repeat steps 1 through 5 until your printer is printing clearly.

• LabVIEW program works on a single computer, but does not work on another.

  We have a laptop running a custom data acquisition program that has been done with labview by an external company. It communicates via ethernet with a box full of material national instruments that is connected to some sensors. While it works fine on the laptop, try to install the software on other computers results in the following error message "year error occurred while trying to open the configuration file"C:\program files\ (program name) \data\ (name of our company) fieldpoint.iak. This error occurs whenever we try to open the settings page of test or run a test. I checked that directory and the file is actually there.

  New computers (we tried several) always have difficulty connecting to hardware via ethernet, and if you look at the network activity in windows, you can see a whole bunch of packages sent but only a little if any course of reception. I wonder if there is a network configuration problem? I tried with the settings as much as I can find, but nothing helped.

  The company that made the software does not meet the emails.

  Any ideas would be greatly appreciated!

  A thinking hand: the file you are trying to read is a FieldPoint config file. I don't know if the FieldPoint configuration file format changed with different versions of FieldPoint. You may not have the same version of FieldPoint installed?

• How to remove fixcleaner? When I go into the Control Panel, it does not work!

  Original title: how to remove fixcleaner

  functions, programs and program says Control Panel does not exist when I try to remove it. How can I get rid of him?

  You could try Revo Uninstaller or maybe CCleaner could get rid of it.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  OR

  You can get their directions complete here.

  NB: Check the q: how to uninstall FixCleaner? about three quarters of the way to the bottom of the page.

• Control Panel: programs: does not

  I open the Control Panel, then click on programs. "" A message appears that says program does not / sometimes windows will try to determine and after 3 or 4 times or when I try to get out it "brightened. Most once not. It is therefore impossible for me to uninstall them, or even to watch the programs that are installed. Any help would be greatly appreciated and I'm new to this. Thank you!

  Hello

  What antivirus/antispyware/security products you have on your machine? Include everything you
  ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
  questions.)

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =============================

  Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
  Games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  It was reported a updated driver it has blocked, so have you updated drivers
  lately? Also check the driver updates in Windows Updates.

  =============================

  If necessary:

  A search for all most .cpl files will be in "C:\Windows\System32" However, you can have others.
  Click on each of them at a time and see if we don't start – if so right-click on it and rename it
  using cpZ as the extension is is to find. Try Control Panel - if no joy persevering of all your
  .cpl files. (Note that other people find other subfolders under C:\Windows not should be judged as they)
  are not active.)

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
  others.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• HP Photosmart C309a does not print on wlan

  Photosmart C309a is about 1.5 years old. Since a few days it prints no more on wlan, printing by port USB is fine. All other devices communicate very well on the router.

  I tried to set up the printer, but it does not detect a router (let the search for more than 10 min)

  Can he do something or is gone hadware?

  Best regards

  Komarchuk

  OK, done

  wireless radio also shows failure after reset.

  What is the probability that it is a hardware problem?

  The printer is out of warranty, so I have to pay for the support of such, which can't help but if it's a hardware problem

  Best regards

  Komarchuk

• The search in a single user account does not work.

  Original title: Research on Windows 8

  Research on a Windows 8 does not (by typing in the menu start is nothing, Windows + F - nothing happens, do a right click on start-> Search-nothing happens) while working on other accounts. What causes this problem?

  Here, it seems a problem with corruption of the account. If the features work correctly on other accounts, and the other is isolated.

  Given that most of the functions with the Windows key do not work, I recommend that you create a new account and transfer the content and work on the new. Remove the one who has problems.

  new user

  Transfer files from the folder of the user by referring to the article:

  hTh

• First the metadata Panel Pro does not find in prelude?

  I can't the Premiere Pro project metadata Panel to display in the window of metadata. I'm in the display of metadata settings, check the control panel and it does not appear. Return to settings I find the box unchecked. What Miss me?

  Hi Christophe,

  Thanks for digging in the prelude and emphasizing in this regard.

  In fact this "premiere Pro project metadata" option should not be present in the display of metadata inside prelude.

  It works perfectly in Premiere Pro. You can choose one of the present field under "premiere Pro project metadata" to show as list view columns in the project Panel.

  However, we cannot change the list view columns in the prelude project Panel.

  There are chances, that it has been copied by mistake to the prelude of options from Premiere Pro.

  This option should be removed from prelude. We're looking probably in it.

  If you have concerns about any metadata stream, please report it. I'd love to discuss.

  Take a look at the following posts about metadata in prelude.

  https://forums.Adobe.com/thread/1932943

  https://forums.Adobe.com/thread/1943114

  https://forums.Adobe.com/thread/1941796

  https://forums.Adobe.com/thread/1670180

  https://forums.Adobe.com/thread/1633394

  https://forums.Adobe.com/thread/1966939

  I hope it helps.

  Thank you

  MILIN

• Bland Muse - States Panel - Adobe does not work when you use images of filling

  Hi all

  I have a filled rectangle with an image using the control panel of the padding in Muse. I want the rollover State to present a slightly modified image. I have change the rollover State in the States Panel and check the option melted and set it for ease in/out to 0.5 s.

  When I preview/publish my site, the fade does not work. The image flashes just as he would have before the last update.

  The works of bland on the text very well or if I wanted to reduce the opacity of the image in the rollover State, but not one filling to another. Why is this?

  Thanks in advance.

  I see in Firefox, it isn't the transition but Safari it is. So I suspect that this is probably the browser compatibility to have a transition of filling.

• Panel 'tabbedpanel' does not appear in article 13.2 AE

  I'm trying to understand why this code does not appear in AE CC 13.2 (but in works fine in lower versions).

  I tried several variants, but none of them worked properly.

  {
  function scriptUIPanel(thisObj){
  
  
  var myWin = (thisObj instanceof Panel) ? thisObj : new Window("palette", "myWin", undefined);
  
  
  var myTab=myWin.add("tabbedpanel",undefined,"My Tab Panel");
  myTab.alignment = "fill";
  var tabCont1=myTab.add("tab",undefined,"Tab 1");
  var tabCont2=myTab.add("tab",undefined,"Tab 2");
  
  
  return myWin;
  myWin.center();
  }
  scriptUIPanel(this)
  }
  

  It's the same thing when I create and show the three windows: the third window does not show.  In fact if you add an alert() at the end of the code, the window if there is in the alert dialog box.

  So, I have to change the window "palette" in the window of 'dialogue', which works very well now in article 13.2 AE

  I tried the dialog box, and it works.

  	{
  	function scriptUIPanel (thisObj) {}
  	var myWin = (thisObj instanceof Panel)? thisObj: new window ('dialogue', "myWin", undefined);
  	var myTab is myWin.add ("tabbedpanel", undefined, "My tab of the Panel");.
  	myTab.alignment = "fill".
  	var tabCont1 = myTab.add ('tab', undefined, "1");
  	var tabCont2 = myTab.add ("tab", undefined, "2");

  	If {(myWin instanceof Panel)
  	myWin.layout.layout (true);
  	} else {}
  	myWin.center ();
  	myWin.show ();
  	}
  	}
  	scriptUIPanel (this);
  	}

• See 4.5 Single Sign-on does not

  I try to activate SSO for a specific ORGANIZATIONAL unit.  The problem I see is that it's still asking me a password.  We have an Interactive logon message is configured under Local Policies\Security Options click OK on this screen.  I had the view_agent.adm imported, but we have a 2008 domain controller, and they said that it imported without all the configured settings.  They have enabled SSO and I can see in the registry for AllowSingleSignon it's true.  I have to also configure the registry in HKLM\software\microsoft\windows nt\currentversion\winlogon?  If I set the account to the Administrators group and set up AutoAdminLogon and ForceAutoLogon registry, it tries to connect, but not with the password.  How can I configure it properly because the view Management Guide does not mention reg keys configuration.

  4.5 is not this bug; the interactive logon message won't break SSO.  See http://blogs.vmware.com/view/2010/12/troubleshooting-single-sign-on.html for advice on troubleshooting SSO.

• Panel tabs does not work in page fragments used in a stubborn job fl

  Hello
  
  I tried to create a simple page with a tab panel below fragment
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < jsp:root xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1".
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
  xmlns:f = "http://java.sun.com/jsf/core" >
  < af:panelStretchLayout id = "PSL1" >
  < f: facet name = "center" >
  < af:panelTabbed id = "pt1" >
  < af:showDetailItem text = ' showDetailItem 1 ' id = "sdi1" / >
  < af:showDetailItem text = ' showDetailItem 2 ' id = 'sdi2' / >
  < af:showDetailItem text = ' showDetailItem 3 ' id = 'sdi3' / >
  < / af:panelTabbed >
  <!-id = "af_one_column_stretched"->
  < / f: facet >
  < / af:panelStretchLayout >
  < / jsp:root >
  
  
  I then added in a stream of a task, the defined task flow that is created just above. When I run this page, the page is loaded, but the tabs move. When I click on the other tabs, it does not change, it is still active only in the first tab.
  
  Is this a bug in the adf, or am I missing something?
  
  Can someone please?
  
  Thank you
  Annick M

  Hello

  put the managed bean that manages the switch dynamic region in upper memory on demand (e.g. viewScope) scope

  Frank