While doubt com a rede e material studies

Similar Questions

• I have windows xp and whenever I click on Installer Windows icon comes out and says it: preparation for the installation and it takes a while to come

  I have windows xp and whenever I click on an installer of winows icon comes out and says it: preparation for the installation and it takes a while to come

  Hi DanBourque

   

  1 does the problem occur when you click the icon of the exe file or any application shortcut icon as well?
  2. for how long have you been faced with this problem?

  3. did you of recent changes on the computer?

   

  You can re-register Windows Installer and check if this helps-
  a. Quit all Windows programs.
  b. click Start, click run, type msiexec /Unregister in the Open box and then click OK.
  c. click Start, click run, type msiexec/regserver in the Open box and then click OK.
  d. restart your computer.

  I hope this helps.

• Doubt com rede (tranferencia) speed

  OLA pessoal, tudo bem?

  Gostaria of depower uma doubt that faz tempo EU tenho, recetemente EU I bought Doi servidores Dell T410, ambos com Plaça Giga, I bought um Giga switch da 3COM, e engracado quando mando archives of um para o outro a speed not bate no maximo 22 MB/s, a boa e infraestrura DELL + HP, a speed of transfer nao deveria ser maior? Poxa to e Giga deveria bater no minimo each 500 MB/s... RS

  Alguem possui any information?

  Obrigado

  Diego of IO,

  But before nada e preciso acertar as measures: switch o e Plaça Québec você comprou sao of 1 Gbps (gigaBIT por segundo UM). A transfer that voce's interim relief deve estar explain a 22 Mbps (megabyte por segundo). Dito isso, o maximo as voce vai get e 100 MB/s or 800 Mb/s each.

  Agora of volta ao seu problema: configurar tried as portas e NIC turn como 1 GB Full Duplex. ISSO em geral solve os problemas. Monitora one of interface not rede no switch para ver is nao are ocorrendo erros e retransmission CRC o ser ruim cabeamento committed game. E veja is o destino OU origem back dados nao esta sendo gargalo para o disco has transmissao.

  ABS

  Rafa

• HOW is it WHEN I EXPORT MY PNG or EPS FILE TITLE CARDS COME OUT RED/YELLOW PIXELS?

  

  Disable the MPE material in the project settings. Set it to software.

  See if this will help.

• Change the definition of the materialized view while maintaining access for users uninteruupted

  Hello

  We have a system report and the need to change the report definition mv access - like to do it without interruption.

  Is this possible?

  the sql behind mv was change picks up so column of another table.

  Have you heard but not used for dbms_redefinition tables

  Thank you

  It is built in the Oracle solution for this one, where you can edit the definition WITHOUT interruption. You can drop the materialized view existing with the clause "save table" and rebuilt the view materialized on 'predefined table'. I googled this example for you

  create materialized view mv1 as select dept , count(*) as cnt from scott.emp;

  We want to change the statement so that only dept more 5 will be calculated

  drop materialized view mv1 preserve table;
  

  Notice that PRESERVE TABLE clause - mv1 table is not droped - single layer mview.

  desc mv1
  

  now, we create the mview with a different query on top of the existing table

  create materialized view mv1 on prebuilt table as  select dept , count(*) as cnt from scott.emp where dept > 5;
  

  Notice that on prebuilt table the mview uses the existing object clause.

  exec dbms_mview.refresh_mview('mv1');
  

  http://StackOverflow.com/questions/18085894/redefine-MATERIALIZED-view-with-no-downtime

  http://Arup.blogspot.com/2009/01/ultra-fast-MV-alteration-using-prebuilt.html

• Con ISA Server while Red VMWARE Server 2

  Hola Foro... paso a form el problema as tengo, quiero hacer funcionar an ISA server con UN ADSL (2 while RED, y LAN WAN)

  Esto lo quiero hacer con a HOST VMWARE SERVER Windows 2003 bajo, red HOST tiene el 2 while

  1 LAN (red interna con DHCP)

  1 WAN (ADSL Modem)

  Como puedo hacer para that the WAN solo tome del IP ADSL modem?

  Se you can hacer esto con VMWARE SERVER?

  No tengo good claro todo el tema no redes office, bridge, the host-only, etc. want help me podrá a resolver este problema?

  Desde ago thank su ayuda!

  PD: the idea in a futuro no muy lejano are add mas while al physical RED HOST connect 1 ADSL o mas para enlace an Internet.

  Standards organizations.

  Hola Guson,

  MI primera mid-week're Instalar ESXi (free) donde estas Running Windows 2003 con VMware Server, dado para el tipo tasks than estas queriendo perform lo veo mas robusto y seguro.

  Sober crearias UN vswitch0 donde poner una placa para management ordered ESXi console y lan. In el segundo vswitch colocas segunda placa a modo DMZ.

  Luego creas una vm con back while y colocas una in cada cada vswitch portgroup.

  If going to por the opcion of VMware Server.

  ACA you paso UN link muy bueno para veas rapidamente networking.

  http://www.carbonwind.NET/VMware/VMwareServerNetworkingOptions/VMwareServerNetworkingOptions.htm

  I think the config seria, put both while bridged, en mejor y una conectarla al modem adsl, the other campaign directly has the LAN.

  CREAS una vm, y the POWA of the DMZ the sober colocas vmnic that is located in the DMZ, then the other campaign placed the sober colocas the LAN.

  The Plaça of the DMZ the dejas in DHCP, the Plaça of the LAN IP fija das.

  Should funcionarte ok.

  Saludos

  Diego Quintana

• REDES Separando

  Good afternoon colegas,

  Tenho um Servidor ESXI com duas redes entraba por duas while of rede.

  O esta ocorrendo e as some management IIS ficam extremamente lenta quando as duas rede ativas are while.

  Awesoe ocorrendo if application is between as redes.

  Are any practices para boas norma this type of situation?

  Imagem do Networking segue da minha rede configurada. A principio as redes eram pra estar totally isoladas product?

  Desde ja Agradea§o a bonitos,.

  Existem pontos 2.

  UMA as ja faith levantada e has Supreme self estarem ligadas ao mesmo switch core com dati different can cause problems, nesse chaibi, voce would um looping rede na, e o seu switch comecaria a dropar some pacotes OU ficar meio perdido.

  You svetila a fazer um nic team (juntar as duas while of rede) from which both trabalhem com mesma speed.

• Outline of the block diagram flashing red

  Hello. I don't have access to the Vi in question at the moment so I'll make it as General as possible. My Vi worked properly for a week or two, but today it started to flash red around the edge of the block diagram. Once the Vi makes the block diagram whole black for a while, followed by the red square around him. What is this red box? They are still able to run the Vi, it's why I can't stop their however, it is not a display of alarm or anything like that. I tried to watch as they run, but am getting no where fast. I just want to know what means the flashing red box does not pinpoint the problem. Thank you

  This means that your chart has been set to a big "breakpoint." Go to View > breakpoint Manager and delete the offending breakpoint.

  If you hold down the CTRL key while running a VI, LabVIEW adds a breakpoint at what you click on, so just be careful with that. I accidentally added breakpoints to my code more than once.

• Command and Conquer: red alert on Windows 7 (Windows 95 game on Windows 7?)

  Hello

  I am currently trying to install Command and Conquer: red alert on my computer, which is running Windows 7. I have scoured the internet for answers and found the following two sites which, although not specifically designed to Windows 7, I thought may help: http://www.ehow.com/how_4852443_conquer-red-alert-windows-xp.html and http://www.ntcompatible.com/compatdb/details/command_and_conquer_red_alert_windows.html. From the second link, I downloaded the compatibility tools kit which, I suppose, has allowed me to get to step 10 on the first link.

  Which means that I did everything up to actually be able to install the game. When I try to install the game I get the following error: "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. "I looked at the system information and Windows 7 is a 64-bit program (which many of you probably already know, I'm not very tech savy). In any case, I wonder if there is a way in which I can get this Windows 95 (32 bit of sense game I guess) to run on Windows 7. Any help is appreciated thank you.

  Command and Conquer: red alert is not at all compatible with windows 7. Red Alert 3 is good.

  teengeek.freehostingcloud.com

• How to remove red put highlight required radio buttons?

  Dear forum,

  When you group the two option buttons to select 'Yes' or ' ', these fields value obtained Type ' 'User entered - required' as I wanted to force a selection. " Unfortunately, all of the required fields appear in the PDF preview (and form PDF final standalone) in a red frame to highlight that it is a required field. But I don't want to highlight this or with a rectangular red or other color elements while leaving all the items highlighted in this light blue that is created from the Adobe PDF form toolbar.

  My current workaround is to set the value of 'Before user - recommended' field but this is not what I really want to have.

  No idea how I can remove this red color mode?

  Thank you for reading, and to solve the problem,

  CaBe

  In any case, if you want a working solution in which you "modifiable" fields in the light blue color without too many problems, I suggest two ways to go about this.

  • 1. use the "existing" highlight fields do NOT use the "required" property standardized required fields, but rather to do a simple check on your own on the event "preSave". The code would look like: (whenever a user tries to save) is empty "requiredfields'? -> inform the user that they must enter the required fields. (and if you want, you can add some sort of"derivative" indicating which fields are missed. To be clear, not weird color until they have actually tried to save and not entered information req... Otherwise, you must indicate this by text or something from the start. for example. the text has to say "check the applicable box. (required) ("or they don't know which buttons are in fact required.)
  • 2. do NOT use the "Highlight" existing fields but use the "required" property that is standardized and rather make your own 'colour' of all the required fields. The code would probably just: the color input field in all the different fields on the start of the document. (and maybe remove the color when something is entered in the field).

  These are the two required faster ways I can get that will allow you to keep the blue highlight, while removing the ugly red border of the required fields. I tried a few different things about simply trying to simply "hide" / remove the red color in the usual way, but so far, I've had no luck.

  Best regards, Mattias

• Refresh a specific partition of the table, materialized

  
  DB version 11.2.0.3 Linux

  We have several views partitioned materlialized. Partitioning key is the principal. We want to update partition independently, for example to update all partitions of materialized view for principal GB (e.g. the principal refresh GB only although there are also other partitions belonging to other mndators which are obsolete).

  Is it possible to refresh only the partitions? I am aware of the track changes of partition but I think / know that it is possible to update a specific partition.

  We have several views partitioned materlialized. Partitioning key is the principal. We want to update partition independently, for example to update all partitions of materialized view for principal GB (e.g. the principal refresh GB only although there are also other partitions belonging to other mndators which are obsolete).

  Is it possible to refresh only the partitions? I am aware of the track changes of partition but I think / know that it is possible to update a specific partition.

  Non - Oracle update process not to refresh a specific partition.

  But there is a work around if you manage refreshes him yourself.

  WARNING - This is NOT for the faint of heart. I do not recommend the use of the approach unless it is absolutely necessary. Make sure you understand all of the issues involved before using this technique of production.

  Basically, you:

  1. create a partitioned table pre-built to found the MV on

  2. create a MV using the pre-built table

  3. create a regular work/temp table with the same structure as the MV

  4. fill the temp/work table with new data of the partition (updated)

  5. run an EXCHANGE PARTITION of work/temp with the 'specific' partition table you want to update

  Arup Nanda has a text with a very simple example of how the process works. You will need to modify it for your use case.

  http://Arup.blogspot.com/2010/04/online-MATERIALIZED-view-complete.html

• Photosmart 8150 disorder - Microsoft Word print black, everything is RED

  Hello

  My printer prints ONLY red in all programs except Microsoft Word. It prints only red in PowerPoint, Excel, Preview (PDF format) and Web pages. I tried out the color cartridge and having only one black; pages through the printer and come out blank. I tried to do black and white or grayscale settings, and it still comes out red. I cleaned the cartridges and printed tons of test pages. The test pages are always correct.

  I spent hours combing internet for more information about printing HP Photosmart 8150 in red by default in all programs EXCEPT Microsoft Word, but I have not found anything. I talked to Tech Support Applecare and we have reinstalled the printer driver, reset the printer to my Macbook settings and still cannot solve the problem. They told me to contact HP. I've had the printer for almost 5 years so it is old.

  If anyone can help please respond. I'm on Mac OS 10.5.8 with a 2.4 GHz Intel Core 2 Duo processor.

  Thank you

  Spartanlia

  I think it's a software problem.

  Let's start with a reset of the print system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, uninstall the HP software like this:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Finally, reinstall the software from here.

• Rede of transfer between maquinas vm esxi lenta e física

  BOM dia, estou com uma big biggest, estou com o rede minha to em esxim 4.1 VM ware, very one transfer Máquinas e tolls one in-between rede fisica esta muito batendo em torno of 300 kb/s wave lento non virtual box chagava a 3 Mbps.

  alguem ja passou por esse problema?

  Bem Vindo.

  Gostaria of sabre some information para ter but street than apontem some possible problem

  1 - Qual e a placa server of rede? (Você do ver isso em Configurations > network adapters)

  2 - Qual e a speed em as essa Plaça esta trabalhando (1000 full? The half? (Self?)

  3 - Qual e o sistema operational machine of da virtual? Qual e o tipo placa of rede (change settings na VM)?

  4 - a VM VMware Tools wont com esta?

  Obrigado.

  Atribua os pontos caso has helped decided seu problema OU resposta.

• Alterando IP interface da física com vms online

  Question of medroso than nunca Fez e surgiu a curiosidade.

  Tenho maquinas tolls being Produção rodando em na mesma rede por wave o ESXi interface is communication com a rede. Preciso mudar o IP interface how desta, is EU mudar com as Máquinas tolls rodando, estas maquinas terao some problema? Or a configuracao física host não interfere em nada Sin maquinas tolls?

  Valeu!

  Ivanildo,

  Cara, had nao faria isso, derruba tudo... lol fun.

  A us e voce quer mexer no IP Console da Service, e ISSO? SE sim, você pode alterar PortGroup do through da Service Console, or only ate mesmo localmente no servidor.

  Exchange of the os no VMware sao independent each back outros, o portgroup da Service Console nao influencia not das Máquinas tolls, o maximo as pode acontecer e voce perder a conexao com o vmware, mas as Máquinas tolls continuam running members.

  ABCs

  Por favor, não don't atribuir os pontos para e resposta 'useful' or 'correta.

  Se a sua question faith respondida, mark "Answered" como para o topico can.

  Mauro Bonder - moderator

• Source for materialized views

  Hello
  
  I'm looking for the name of the table in which the source code for materialized views is stored. For a normal view, it comes to DBA_VIEWS, burt materialized views are not in
  
  TIA
  
  Arno

  Try DBA_SNAPSHOTS or DBA_MVIEWS