Whistle with ECM - W1M Bluetooth microphone and a3000 camera

Similar Questions

• First film edited with Premiere - proxy, audio questions and multi-cames

  I have several questions that I have not found in the videos and forums, at least not for my situation. I'm finishing the revision of sequences now adding comments in prelude and will begin soon to change it. Please excuse the long post.

  Background:

  I'm working on my first film, a documentary. Most of my work is 10-11 interviews, about an hour each. The majority is 4K Panasonic GH4, but some of the images is an Olympus MDGS EM5 II 1080.

  I recorded the sound using a LAV and a shotgun microphone, each goes in its own channel in a Tascam DR - 70 d, an external audio recorder, with a line going into the camera for reference. Audio and video files (at least one, since GH4 brings several) will have a slate tone to the head, created by the audio recorder. The recorder has captured the audio 24-bit, 16-bit audio captured camera. The recorder fooled also two other channels to lower 12db audio in the case of audio peaks.

  I will be changing on Mac laptop - 2013 MacBook Pro, OS 10.11.5, 2.9 Ghz Intel Core i7 memory of 16GB 1600 MHz DDR3, NVIDIA GeForce GT 650 M 1024 MB graphics card. I think I need to create my images 4 K proxies.

  All images is storage on my external drive of G. The interviews are separated and are located in the folders of each interviewee.

  The final project will be 1080, not 4K.

  Questions:

  Naming - being a hybrid, the GH4 breaks an interview of an hour in several separate files. Should I change the names of all files, or keep them in folders named in Premiere Pro? If I should change them, should I do it before swallowing?

  First synchronize audio and video, but since I have an audio file and several video files, I synchronize each video file individually or assemble them somehow, then synchronize? If each of these excerpts from the interview is sewn together, wouldn't that make editing more easy?

  When you create proxy for video files, also create proxy for audio files separate? Once synchronized, will be presented first the Hi output version of the resolution of the video and audio?

  Multicamera - in one case, I have an interview with two 1080 cameras. But for the rest, I've shot with a camera in 4K, so I intend to use a section cropped interview (zoom) when an important statement is mentioned, simulating a two cameras set up. Given that I have to create a sequence of multi camera after I ingest proxy files, first will be a problem activating/deactivating files proxy for the salvation of the res files?

  B - roll is added later, once the interviews are published about. It will be a few (not 4K) images and photos. Make the proxies of these too or first care to have all files proxy or a mixture?

  Finally, I have never edited a video which has been more than 10 minutes. This film could be of 40 minutes or up to 90. Everything I need to know to make the editing more smooth? I am a beginner!

  Thank you for bearing with me and thank you in advance for any idea!

  -SK

  1. allow only file names.  Make your organization with records (hard drive) and ferries (project).

  2. Manual of multi-camera method

  3. the audio files are small and will not need of proxies.  Export will always use the original media.

  4. possibly.  My first attempt was a disaster that froze the machine so badly, I had to do a hard reset.  However, you need not go back to the original of the sequence to make your cut-ins.  Proxy media will do fine work.  Simply place a copy of the plans at the 50% level in V1 and a second copy on the scale of 100% in V2 when creating the source multicam sequence...  Will allow you to see the full versions and then cropped the multicam editing.

  5. the photos no need of proxies.  If the B-roll change, make proxies for those.  PP not care a spirit to keep all the images the same.

  6. $ 2,000 custom PC vs $ 4,000 Mac Pro - YouTube

• You can control volume with bluetooth headset and the new Apple tv?

  Hello community!

  I have a new Apple TV and I'm watching tv and movies series, but the only way I can do it is night. I don't want to disturb my family, so I was wondering if I can watch it with a bluetooth headset and control the volume. What I mean is if I can have a very low volume on the TV but more volume on my headphones. I can do with my PS4, but I have most of my movies in iTunes.

  Thanks for any help you can provide.

  You cannot output audio to the tv and the headphones at the same time if that's what you're asking. However, you will be able to control the volume of the headphones using the distance of Siri.

• Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?

  Is it possible to hear a Bluetooth speaker and the internal speakers at the same time on the iMac with OSX 10.11.2?
  I can only have my Bluetooth speaker on or my internal speakers on my outings Sound System Preferences.
  Is it possible to have both of them at the same time?
  Thank you for your patient

  To my knowledge, no.

  Barry

• Does not Bluetooth, Webcam and internal microphone (HP Pavilion dv6-7007tx Entertainment)

  Dear all,

  When I installed windows 7 to 8, Bluetooth, webcam and internal microphone window do not work.

  My laptop is HP Pavilion dv6-7007tx Entertainment. Pls help.

  Thank you

  Kyaw

  Please try the app "pilot identifier. It will help you to find almost all the appropriate drivers for your do not book.

• Pavilion dv7 6c95dx: hardware with built-in microphone and webcam problem

  A couple of months, I had someone replace my fan and the heat sink. Since the replacement my integrated webcam and MIC do not work. I tried to uninstall and reinstall the drivers several times. When I go to device management there is no legacy Imaging. If I click on display - display the currencies of imaging equipment shows up, HP Deskjet 2050 j510 series (USB) HP TrueVisionHD (twice) and USB video device. When I click with the button straight on and go in properties on any of them, he said

  "Currently, this hardware device is not connected to the computer. (Code 45)

  To resolve this problem, reconnect this hardware device to the computer. »

  I think that when my fan has been replaced the webcam/mic cable may have been disconnected or damaged but I don't know what cable it is. Can I disassemble my laptop if I have to, but I don't know where the webcam and microphone are hung and I could not find in a manual or anything.

  Hi @gmurph52 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion dv7-6c95dx Notebook and questions with the WebCam. Thank you for all the information about what you have tried and what you see in Device Manager. Very useful.

  I would like to start by uninstalling the devices listed in your device under imaging devices Manager. Reboot the laptop.

  Do you see something new in there?  Here's a document on how to fix the WebCam as the computer sees connected and recognizes it.

  Are not, you may have to check the connections. Here is a link to your manual page 30 parts and page 84 of deletion for the location on your laptop.

  I hope this helps.

  Thank you.

• Full volume of the Bluetooth microphone in the recording tab and loud noises

  I recently bought a bluetooth dongle for my pc and I have been using a datel bluetooth headset as a microphone, the microphone was works well but I disconnected and then reconnected it and the green bar in the recording tab is now completely at the top, if I record something and I look back all I can hear is severe noise. I don't see how the material could have suffered that I has not yet remove my head in time between disconnection and reconnection there. Any help would be appreciated.

  Hello

  After connecting a microphone to a microphone to your computer and turned on Jack (if the microphone has a button), perform the following steps.

  a : Open Sound by clicking on the Start button, then Control Panel. In the search box, type soundand then click on sound.
  b: Click the recording tab, click Microphone, and then right click on the microphone and choose Properties.
  c: Go to the custom tab and place a check on amp Microphone.
  d: Now click on advanced and put a check mark on the two following options under the "exclusive Mode" option.
  a. allow the request to take exclusive control of this device.
  b. give exclusive mode applications priority.
   
  In addition, under the option "default format" try to use different sampling frequency in the drop-down menu until you get satisfied registration.
  e: Click apply and then click Ok to close the window.
   
   
  Hope this information helps.
   
  Answer please if you have any questions.

• Win 8 problem with my new microphone and audio!

  Hello guys! I recently bought a headset of game G230, very good hardware, but when I asked it on the knees, it did not work very well, I see my reading devices (I have attached a picture) sound not really from the gameset but speakers, when I switch off the speakers and keep only the helmet, no sound at all even you comes from the sound of the speakers, it says that I hear in fact from my helmet G230!

  It's one.

  Two; When I click my button mute in my keyboard, the sound is not cutting it anymore (started after I put the G230) and it continues to work on

  

  I tried to make device by default, it's okay! same problem

  Hello

  Please keep us informed of the issue and the information provided.

  You can also check for any error in the device for the audio, video controller driver and game Manager and write to us. Please follow the steps below to see.

  (a) press the Windows key + X Key on desktop.

  (b) select the Device Manager.

  (c) expand sound, video and game controller.

  (d) check if there is no error (! sign) or (?) Sign).

  Please follow the steps here to adjust the Microphone audio output by default.

  (a) right click on the volume symbol present on the bottom right.
  (b) select sounds, click the readtab.
  (c) in the list, click Microphone , and select the default value.
  (d) click on apply and OK.

  Run Audio troubleshooter.

  Please follow the steps below to run the troubleshooter of Audio playback.

  a. press Windows + W key on your desktop.
  b. write Troubleshooting in the search box in the upper right.
  c. Select Troubleshooting obtained after the search.
  d. Select all the option to display in the left panel.
  e. Select Audio playback option.
  f. click Next to perform the Audio Troubleshooting and follow the steps.

  Get back to us with the current state of your computer and we will be happy to help you.

  Kind regards.

• Computer recognizes the usb microphone and the head set with the sound prompt but not instructions to continue.

  Original title: usb speaker and seeded

  c.p. recognize the usb microphone and head studded promp sound but no instructions to continue. I am trying to add voices or narration to my editing of soundtrack.

  Hi Billylambert,

  1 Windows operating system you are using?

  2. What is the brand and model of headphones and microphone?

  3. what video editing software do you use?

  4. were you able to use the device before without any problem?

  5. have you made a recent software or hardware changes to the system?

  If you are using Windows 7, you can try to run the Audio recording utility and check if it helps.
  Open the troubleshooting of Audio recording

  For more information, see the article:

  Connect one microphone, music player or other audio device to your computer

• Bluetooth microphone seems quiet

  I was really convinced that the problem was with my Bluetooth headset, but after you test it with another phone and my PC (in both cases, the Microphone works fine) I can only conclude that my Droid Mini is the problem (also I realize that this is the forum of MAXX 2 but there is no place for Droid Mini stuff so...).

  Is there a way to fix this? Y at - it a bluetooth microphone volume control? Thank you!

  This is often caused by a conflict with another application (defective). First of all, restart your phone test and safe mode. If the audio BT returns to normal, you must reactivate the apps one by one to isolate the one that creates the problem, then, even if it's one of your Favorites, disable and remove your phone. Re-download the latest version of the app store. This usually fixes the problem.

• My iMac 27 inches in 2011 are updated Bluetooth V4 and it will be able to run the trackpad V2?

  My iMac 27 inches in 2011 can be upgraded to Bluetooth V4 and I'll be able to run the new trackpad 2?

  Nope' but you can use it plugged in on an old Mac with lighting provided to a USB cable.

  See > https://sixcolors.com/post/2015/10/using-the-magic-trackpad-2-on-older-macs/

• HP ENVY 17-R102NL: HP ENVY 17-R102NL Microphone and keyboard

  Hello and thanks for your help.

  I bought this laptop and I have another question 2:

  1 backlit keyboard: backlit keyboard seems that it is not even stated in the technical specifications

  microfone 2: microphone doesn't work. I had never tried the microphone.

  I tested it with Skype (10 windows operating system)

  I've updated the drivers.

  Nothing

  Could you please help my?

  Many thanks in advance again

  

  Hey, Marty. Thanks for posting. I suggest you follow the steps to resolve these two issues.

  Keyboard backlight: press the "fn" key and hold the ' SPACEBAR'. Press "F5" to activate the backlight power. Or simply press "fn" key and "F5" key to activate the backlight power.

  I also suggest you follow the "computers HP - problems (Windows, 10, 8) Microphone" and reply back.

• Apple Bluetooth Keboard and Libretto U100

  I can see this unit, but it says "detection of parameters is not" in the Wizard add new connection...

  Did he get this job?

  According to google, a lot of people have this keyboard works perfectly with XP SP2 MSFT bluetooth.

  Angus

  Post edited by: angusf

  Hello

  Have no proper explanation, but try installing the new Toshiba Bluetooth stack. You can find it on http://aps.toshiba-tro.de/bluetooth/.

  Do these steps to check the Bluetooth feature on your device:
  1. check if the laptop antenna switch is on.
  2. press on the + - key combination to activate the Bluetooth antenna.
  If your laptop is integrated WLAN and Bluetooth.
  3. start the settings Bluetooth of the TOSHIBA-> folder program Bluetooth to turn on the Bluetooth module. Bluetooth works if you see a blue antenna with a bright blue border of the bar on your screen.
  Also a blue antenna icon with the name Bluetooth information interchange will appear on the desktop.
  4. check that your Bluetooth hardware is properly installed.
  If everything looks similar to this, your material of Bluetooth and the software is properly installed and should work normal. If you're still having problems, please see for more information on our site FAQ Bluetooth:
  http://APS.toshiba-tro.de/Bluetooth/pages/FAQ.html

  I hope that you will be able to connect the keyboard to the unit.
  Good bye

• Satellite C650-197 built into the Microphone and Jacks does not

  As the title, I tried to use the microphone that comes built-in on this model (Web camera VGA integrated with built-in microphone) and found his does not work. I tried to plug in an external microphone via the microphone jack and still no registration.
  I can't seem to find the drivers for the integrated or plug anywhere.

  Any ideas?

  Hello

  > I can't can't find the drivers for the integrated or plug anywhere.
  This drivers don t exist. The sound card driver controls everything.
  I think you should first start the webcam software and should test the microphone because the internal MIC is part of the webcam.
  Webcam software provides a tab; settings and properties. In one of these tabs, you will find settings for the audio.
  Here, you can increase the volume of the microphone and was able to record a small audio session.

  In addition I recommend the settings in Control Panel-> sound.
  Make sure the microphone volume is set to maximum. Don't forget to check the hidden devices and disabled it there...

• Satellite R840 - 12 c - conflict with the RFBUS "Bluetooth."

  My Toshiba Satellite R840 - 12 c has a problem with bluetooth.

  On the Device Manager tab, I see a conflict with the RFBUS "Bluetooth."
  So my bluetooth setting does not work... In other words my laptop cannot detect bluetooth despite being bluetooth devices "on"...

  > Tab in Device Manager, I see a conflict with the "Bluetooth RFBUS.
  So uninstall the device first, then download the stack of BT from Toshiba BT portal and after reboot again install this new.
  http://APS2.toshiba-tro.de/Bluetooth/