White 4.2 APEX screen with APEX earphone using weblogic
HelloThere are several of this problem here, but none that I saw with weblogic. I have installed Apex 4.2 in our test instance, copied the images on our weblogic server to create the war file, but get a blank screen when you access the APEX development environment.
I have configured the listener to our database without problem, but just can't get a screen
http:// < our weblogic server >: 8790/apex_test/f? p = 4550:1
4.2 images must be in the right place because it...
http:// < our weblogic server >: 8790/i_test/apex_version.txt
... gives me this
Application Express Version: 4.2
Our production and pre-production are APEX 4.1 and have no problem.
Production:
http:// < our weblogic server >: 8888/i/apex_version.txt
Application Express Version: 4.1.1
pre - ESR:
http:// < our weblogic server >: 8790/i_pprd/apex_version.txt
Application Express Version: 4.1.1
On our Linux weblogic server, I have the following for each instance dirctories:
/ u01/apex (no problem)
apex_listener.1.1.4.195.00.12.zip
Apex. War
i.War
apex_pprd/u01 / (no problem)
apex_listener.1.1.4.195.00.12.zip
apex_pprd. War
i_pprd. War
I created the i.war and i_pprd.war of/U01 files where the directory of images for APEX 4.1 are:
In / U01
for production:
jar - cvf0 apex/i.war - C images.
for pre-production
jar - apex_pprd/i_pprd.war cvf0 - C images.
apex_test/u01 / (white page problem)
apex_listener.1.1.4.195.00.12.zip
apex_test. War
i_test. War
images - 4.2 images directory
I created i_test.war in the directory/u01/apex_test:
jar - cvf0 i_test.war - C images.
War files are deployments in Weblogic using the same managed server.
In the web.xml file, I have the foillowing, just like I have for production and pre-production.
< context-param >
config.dir < param-name > < / param-name >
< param-value >/u01/apex_test < / param-value >
< / context-param >
upward, which is compressed in the file apex_test.war.
Environment:
All instances of database 3 are:
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
WebLogic:
WebLogic Server Version: 10.3.5.0
Linux where weblogic server is:
Release of Red Hat Enterprise Linux Server 5.9
Same version of Linux on the database server.
If anyone sees where I'm wrong, certain direction would be appreciated.
Thank you
Wayne
Published by: wyoungblood on 2 April 2013 15:20
>
There has got to be something with images, some conflict somewhere. But I separated and my orders of pot during the re-creation of apex_test.war and i_test.war used the names of absolute path on the last install. Of more the http://
: 8790/i_test/apex_version.txt gives me: Application Express Version: 4.2
You said your 4.2 instance that it is supposed to get his images, Javascript etc. of i_test rather than I?
Tags: Database
Similar Questions
-
White chat yahoo messenger screen with windows 7 starter
Since the purchase of my new Acer Aspire one notebook, I can't use Yahoo messenger to chat, due to the fact that the chat window remains blank little matter what I tried. I did research online for solution and nothing has worked so far, here I am... Explorer security setting have been changed to allow scripting, run as admin, etc, etc... also changed the settings on Yahoo messenger as well. So any of you 'guru' Microsoft knows what the * is the problem with this crap software? I've NEVER had this problem with XP home on my old HP laptop. Before I go and nukedisk this darn HDD and install XP home, is there any other suggestions that I have not found online?
Indeed, windows7starster stinks
You may need to script disabled in your Internet Explorer.
To activate the script:
Click on the 'Tools' menu in your Internet Explorer toolbar and select 'Internet Options'.
Click on the security"" tab.
Click on the Internet (globe) icon and click on the button "custom level."
Scroll down to "Script".
Enable the following:
Active scripting
Allow paste via script operations
Script of Java applets are all enabled
Click on the OK button at the bottom of the window.Note: Restart Yahoo! Messenger and you should start to see the text in your IM Windows.
-
white screen with purple lines?
Hi, I just tried to update my iphone 5 to latest IOS and after the black screen with the Apple logo and the loading bar finished it went to a screen with edges white and dark with purple in the darkest bits lines. I tried to plug it into my pc and go through the itunes app, but it does not record that the iphone is also my lock button is broken so I can't try to do a soft reboot. No one knows what it is and how I can fix this problem? Please help me
Try to see if iTunes detects the phone into recovery mode: http://support.apple.com/kb/HT1808. This procedure requires the use of the home button but not the lock button, it should be OK.
-
My iPod Nano has a white screen with messages I've ever seen
Hello
I'm having a problem connecting my iPod Nano (5th generation 8 GB) to my Macbook Pro (mid-2009 with El Capitan OS). I tried to restore my iPod nano with iTunes. Restore failed, and my iPod Nano screen has changed to a white screen with a message "do not disconnect". I couldn't eject the device, so I had to unplug the iPod with this message that appears. When I disconnected the iPod a black check mark appears on the white screen with a message "Ok to disconnect". The only way to get this message go away is to lock the screen of the iPod nano, and then unlock it. Then I press and hold the Center button and menu button simultaneously for 8 seconds and the Apple logo appears. Then shortly after, a "Use iTunes to restore" message on the iPod nano. I reconnect the iPod on my Mac and the white screen with a message 'do not disconnect' returns to the top. iTunes does not recognize the iPod. I don't know what else I can do to get my Mac to recognize the device and add songs using iTunes. IPod Nano was working fine a few hours ago, and my Macbook recognized until I tried to restore it in iTunes. It's very frustrating. Any help would be appreciated. Thank you.
Here are pictures of the messages from my iPod nano's display.
IPod Nano was working fine a few hours ago, and my Macbook recognized until I tried to restore it in iTunes.
What was the (initial) reason, you had to do this restoration (before this problem occurred)?
Try to put the iPod in Disk Mode.
Put the iPod in disk - Apple Support Mode
Launch iTunes and connect the iPod to the Mac. If iTunes picks it up, he may ask you to do a restore with a message on the "recovery." Tell iTunes to do a restore. After the full restoration , see if the iPod works normally.
-
HP Pavilion laptop g6: black screen with white cursor, connect
My laptop is a few years old and today after I log in, I get a black screen with a white cursor. I read a few threads on the forums and have tried to take the battery out and pressing the button for 30secs-2mins (tried twice). I can access everything ok in Mode safe, so made a malware bites scan & clean registry. No maleware was found and I rebooted, but always the same black screen when you connect in normal mode. I tried to access the Advanced tab in the BIOS to make the test hardware, but I do not have this tab. I'm out of ideas. Help, please
Hello;
Let me welcome you on the HP forums!
As it works OK in safe mode, then it's SOMETHING that is loaded at startup which is screw up the display. Could be a runtime program. could be drivers, might be a Service.No easy way to tell.
Demarrer start in safe mode, type MSCONFIG in the start area. When that opens, turn off ALL startup items. Reset.
The PC now work, if one (or more) of these numbers - and you have to go through a tedious process of re-enabling them one at a time until the PC fails again. The last of them that you re-activated was the problem.
Here is a tutorial on how to do it: http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/
If the PC still does not work with all startup items disabled, then return to msconfig and click on the Services tab. Check the hide services Ms. Then turn off half superior Services. Reset.
If the problem is resolved, you will need to go through a tedious process of reactivating a Service at a time until you find the one that is the problem.
If the problem is not resolved, turn off the other half of the services. Repeat as above.
No easy way to do...
Good luck
-
HP Jet 7: Black screen with white lines on the HP 7 stream
I bought my HP 7 stream about 2 years ago and I'm now a black screen with white lines whenever I turn on the tablet.
Can you kindly help.
If that's what you see immediately when you turn on, the graphics have not to the Board of Directors.
These tablets were dropped after the first year of release, and it would not be worth the cost if it could be repaired.
I'm sorry.
-
Re: Satellite L300 - black screen with flashing white cursor
All of a sudden my laptop won't start more. It turns on, displays screen toshiba for a second and then goes to a black screen with a blinking white line in the upper left corner. I can't type something here! The last time I used it it was 100% very well, I have not downloaded anything so I'm very curious to what it might be.
Help, please!
Hi mate,
Maybe something messed up to the top of your Windows installation and if the computer may start t more or your HARD drive becomes faulty...
You can access the BIOS? If so, check if your HARD drive is recognized. If so I think that it of necessary to reinstall Windows. Therefore, take the Toshiba recovery disc.
-
Satellite A200 - white screen with 3 beeps
Hello
My Toshiba Satellite A200 was recently gives me a white screen with 3 beeps at every start. I took it to my friend for repair and they told me that I had to take the battery out and put it so that it starts. It worked for him, but not me. I called technical support and told me it was a hardware problem with the memory or the motherboard.
Anyone have the same problem and know what to do? I wouldn't mind not check memory myself I don't know where to start...
Thank you
Hi hpthinker,
I think the support that you called is right and it s a hardware problem. Perhaps with memory or the motherboard
The best way to fix this would be new modules of RAM because they can be easily replaced in a few minutes and are not expensive nowadays.
Just so buy new modules of RAM in your local computer store, or ask your authorized service provider for this problem. They can offer you new RAM modules and you can test it again.By the way: If you have two RAM modules, test it with a module only.
-
I have an ipad pro for a month. The pro was working fine until yesterday. Yesterday, Philippe, I worked with the pro, it frooze. A white uppears screen with the error of activation of words. I have to restart the ipad. Today, when the battery gives me about 50%, it happens again. It frooze the same way and I had to reboot again. This isn't a problem when the ipad was butafter a work of loading time. What is the problem?
Some Pro iPad owners report everything freezes after the end of the loading process, but Apple has fixed this problem in iOS 9.2.
Try resetting your device. This will not erase your data stored on that device.
- Press and hold the sleep/wake button
- Press and hold the Home button
- Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.
Alternatively, you can go to settings - general - reset - Reset all settings
If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.
Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.
More info here:
https://support.Apple.com/en-us/HT201263
If these steps do not work, contact Apple and ask for help.
-
Help! I was loading some CD last night in iTunes and let run all night. This am, I tried to wake up the PC again to a white screen with a mobile mouse arrow. I sought the advice so far and found this informative link:
http://support.HP.com/us-en/document/c03518165
so I tried 3 of the 4 stages:
Step 1: reset - MADE - always have a white screen with the mouse arrow.
Step 2: Unfortunately, I don't have an external monitor
Step 3: recovery of BIOS - DONE - always have a white screen with the mouse arrow.
Step 4: reinstall the memory modules - DONE - always have a white screen with the mouse arrow.
I restarted in Normal mode; In SafeMode... all with the same result = an empty space of the screen, a mobile mouse arrow... but I can't seem to Windows.
Help, please.
There are three main ways to restore your laptop to its 'Condition of the factory' - see the document on the corresponding link below. There is a section to back up your personal files, see the section corresponding to your operating system including a video
Performing a HP System Recovery - Windows 8
Perform a recovery of the HP system - Windows 7.
-
I came here because I believe that it is a combination of several mistakes, I don't know.
When I start the computer in Standard Win2k3, it gives me a white screen with Vibrio black vertical lines across on the screen, with a few horizontal. After some tests, I want to pretend it works, you press Ctrl + Alt + Delete and connected and surprisingly, the computer works - I can see the icon and the load of desk top of the page to the top, BUT the white screen is still there, the bars into brackets upward the desktop icons and the resolution is so low that I only see a small part. Moreover that apparently all workstations had been 'forced' layer on layer on the screen, as I see multiple cursors on the screen all at the same time movement and rhythm (when I move the mouse).The next thing that I checked, is since I have installed WinXP, but as if by magic will not work some of my programs (this is why I use it), and the screen has worked very well and very well (with almost nothing, runnable).
Well, can not compare the two BONES, I also started Win2k3 in safe mode, safe mode with blah, all three cases of Safe Mode gives me good screen and access my programs no internet as safte mode blocks.
I want my internet back AND my good old Win2k3. If anyone can help. It should not be a video card problem because (1) I have integrated a video card AND (2) it works well under XP
It could be a corrupted RAM, even if dxdiag shows all the available RAM, I have hope that there is a way to check WITHOUT removing them from the socket.
It might even be a mistake of an operating system, that I don't know how to make sure that, if I can reinstall after the top in Mode safe
It could be another thing and combinations of these. (Probably the 2 above, in my view, have no idea how can ensure me that)Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows server on TechNet. Please ask your question in the TechNet Windows Server Forums. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
-
Working in Live View when I press the zoom button to focus, I get a white screen with an x 5 or x 10 written. I do not get the image of zoom. He just started this today and I used it for years. Any help? Thank you. OH, I have a 450 d (rebel xsi)
Thank you very much
-
OS boots to a white screen with the pointer of the mouse only
doesn't show any desktop computer
BONES appears at startup but without bars, icons or background when you are finished. Displays only the white screen with the mouse pointer. Even in safe mode unless there is safe mode in each of the 4 corners of the display discription and windows at top-centertablerock,
Try the items listed on this thread.
http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77eLet us know the results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
* Original title: youtube
Hello
YouTube is not playing videos in google chrome, I see only black white screen with nothing happens
YouTube works fine under IE
WATS the problem please say n give solution
This problem has something to do with Dell Data Vault?
because after I turn on my machine, I get this message... Service Dell Data Vault has stopped working
details on dell Vault problem... reference data below
Signature of the problem:
Problem event name: APPCRASH
Application name: DellDataVault.exe
Application version: 3.9.3.0
Application timestamp: 54cc0788
Fault Module name: DellDataVault.exe
Fault Module Version: 3.9.3.0
Timestamp of Module error: 54cc0788
Exception code: c0000005
Exception offset: 00017126
OS version: 6.0.6002.2.2.0.768.2
Locale ID: 16393
Additional information 1: a539
More information 2: 18736dd72b4a3074605a116ef5884f1f
3 more information: c832
Additional information 4: 3c436c3937586374ee122b3cd7b3def9Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409PLEASE HELP SOON
Given that this problem affects Google Chrome, I ask in the forums of Google Chrome: Google Chrome help Forum
-
Black screen with white cursor at the end of the New Installation
I try to perform a new installation of Windows Vista Home Premium (64 bit) on a Dell Inspiron 1545. The hard drive was completely wiped out and I don't have the original disks (I use a Vista CD from another computer Dell). Installation is proceeding normally up to the phase of "Complete installation" where it crashes for almost an hour and then goes to a black screen with a white cursor.
I have tried all the following suggestions (found here and on other sites online):
Reset the BIOS has no effect.
By pressing SHIFT 5 times has no effect.
CTRL + Alt + Delete has no effect.
Rename to the event log file has no effect.
Remove one of the memory modules if the computer has only 2 GB installed has no effect.
Running CHKDSK finds no error, and has no effect.
The attempt to start safe mode causes hang crcdisk.sys.
Try a normal boot hangs at the screen loading w / loading scroll bar "stuttering".
Startup Repair runs for hours with no results (I said to cancel after you let it run overnight only to find it still 'work' in the morning)
Does anyone have suggestions more?
Thanks in advance! : D
Dell Media you are currently using may not have drivers appropriate for your PC.
Contact Dell technical support (have your number of ready service if they ask for it) and ask for the "recovery media" to your specific model number. There may be a small fee involved.
http://www.Dell.com/content/topics/global.aspx/services/en/dsc_home?c=us&l=en
J W Stuart: http://www.pagestart.com
Maybe you are looking for
-
55VL900A and BDX4300KY - TV is not output Dolby Digital fiber optic
Just installed my new TV, 55VL900A - great picture, very happy. I have a BDX4300KY a drive blueray and Foxtel connected to the TV via HDMI. The TV has audio output optical fiber, which I run for my Yamaha DSP - A1 amp. The Blueray and Foxtel are defi
-
I have a problem with the previous results of LEDs and indicators of compensation
I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here... The pr
-
How to get full screen windows media center monitor config
units Windows media center config monitor, how to get full screen like boxee and Houla, have an acer 23 monitor
-
BlackBerry Smartphones BBM on "BOLD"
It would be great if someone can help me with my problem, I have a BB bold and when I use my contacts get stuck in touch waiting for blackberry Messenger and im unable to add them to my contact list... also when I send a PIN to them it remains in my
-
Problem blackBerry Smartphones with e-mail on BB 8520 configuration
I can't configure my emails on my BB device 8520. When you perform the e-mail Setup Wizard I have only the ability to create an email account with Blackberry Enterprise Server. I can't find the option to set up other accounts such as gmail or other e