white screen with lines

Similar Questions

• Display Latitude E6510 does not. White screen with lines

  I was working on my Dell Latitude E6510 normally and after I finished I stopped him. I go to the city for about 2 hours and when I got home, I press the power button / stop and suddenly the screen is white with a few scratches on the side. Tried to feed him several times, nothing. Reconnect AC, battery, RAM, HARD drive, peripherals, still nothing.

  Output DisplayPort works without any problem.

  Output VGA works without any problem.

  You can see the pictures and the link to the video on YouTube of this problem.

  Any help or advice? Would be very grateful. Thank you.

  YouTube - Dell Latitude E6510 screen does not, lines, stripes, white

  

  I hope this helps. I have a Latitude E5410 I bought knowing that the LCD screen has a white screen or white veil or a matter of contrast high. I checked that the entire screen removable Panel or it deforming slightly likely to prevent the white veil to disappear, leaving me with a normal display. But I had to "hold my mouth just as it should be" OR I could lose visibility and I Whiteout reappear. I did troubleshooting from the LCD cable connection to the motherboard. I removed the cover of the LED/hinge and screws of the keyboard. I started the computer and put in the Setup (BIOS). After that I got the content of the screen, I removed the keyboard and waved the LCD cable connector. It was nice sitting. I replaced the keyboard and remove the bezel before display. I waved the display cable DC7TY to the small LED Council, but that did nothing. I turned off the computer.

  I unscrewed the 6 screws holding brackets LCD panel and hinge for the lid of the display, exposing the back of the display panel itself. On the right side, low on the Panel, I peeled back the glue 1/4 x 3/8 on the clear plastic covering the printed circuit board, exposing the flex cable going to the backlight. I spilled Brown lever that keeps the flex cable plugged into the connector on the plug, removed the cable, he moved several times to repeat, then hit the lever to keep it. With the LCD in this way exposed, I started the computer and entered in the Setup program. SUCCESS!  No amount of stirring or warping brought Whiteout. I've buttoned to the computer and came here for successful results.

  Your Dell may be different, but you can report if your symptoms or the results are different, and HOW EXACTLY became you a success. See you soon!

• BlackBerry Smartphones Starting Error: my BB shows a white screen with 3 lines of text. Help me please.

  Hello guys,.

  I bought a Blackberry "BOLD" from a few months ago and I've been to update facilities when my laptop turns off accidentally. Since then, when I turn on my blackberry, it does not show the normal screen. It shows a white screen with the following text:

  BlackBerry 4.0.0.183, platform Options, Registered Messages. and when I click on Options, I get this error message

  Error starting net net_rim_bb_options_app:Module 'net_rim_bb_spellcheck' not found.

  What should I do? I really need my phone back. :-( Help, please! Thank you for your suggestion.

  I tried: pull battery, uninstall the Desktop Manager and the soft reset and it still does not work. :'-(

  Sandy.

  Ahhh... particular case then. What you need to do is to get the operating system that you want to:

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  And then use the JL_Cmdr utility to destroy what is on your device:

  http://forums.CrackBerry.com/F3/how-wipe-JL_Cmder-53502/

  And then you should be able to reinstall your operating system.

  Good luck... and this can be very difficult... Be very patient with you as well as your devices...

• My iPod Nano has a white screen with messages I've ever seen

  Hello

  I'm having a problem connecting my iPod Nano (5^th generation 8 GB) to my Macbook Pro (mid-2009 with El Capitan OS). I tried to restore my iPod nano with iTunes. Restore failed, and my iPod Nano screen has changed to a white screen with a message "do not disconnect". I couldn't eject the device, so I had to unplug the iPod with this message that appears. When I disconnected the iPod a black check mark appears on the white screen with a message "Ok to disconnect". The only way to get this message go away is to lock the screen of the iPod nano, and then unlock it. Then I press and hold the Center button and menu button simultaneously for 8 seconds and the Apple logo appears. Then shortly after, a "Use iTunes to restore" message on the iPod nano. I reconnect the iPod on my Mac and the white screen with a message 'do not disconnect' returns to the top. iTunes does not recognize the iPod. I don't know what else I can do to get my Mac to recognize the device and add songs using iTunes. IPod Nano was working fine a few hours ago, and my Macbook recognized until I tried to restore it in iTunes. It's very frustrating. Any help would be appreciated. Thank you.

  Here are pictures of the messages from my iPod nano's display.

  IPod Nano was working fine a few hours ago, and my Macbook recognized until I tried to restore it in iTunes.

  What was the (initial) reason, you had to do this restoration (before this problem occurred)?

  Try to put the iPod in Disk Mode.

  Put the iPod in disk - Apple Support Mode

  Launch iTunes and connect the iPod to the Mac.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  Tell iTunes to do a restore.  After the full restoration , see if the iPod works normally.

• Satellite A200 - white screen with 3 beeps

  Hello

  My Toshiba Satellite A200 was recently gives me a white screen with 3 beeps at every start. I took it to my friend for repair and they told me that I had to take the battery out and put it so that it starts. It worked for him, but not me. I called technical support and told me it was a hardware problem with the memory or the motherboard.

  Anyone have the same problem and know what to do? I wouldn't mind not check memory myself I don't know where to start...

  Thank you

  Hi hpthinker,

  I think the support that you called is right and it s a hardware problem. Perhaps with memory or the motherboard

  The best way to fix this would be new modules of RAM because they can be easily replaced in a few minutes and are not expensive nowadays.
  Just so buy new modules of RAM in your local computer store, or ask your authorized service provider for this problem. They can offer you new RAM modules and you can test it again.

  By the way: If you have two RAM modules, test it with a module only.

• Satellite L500/00W - gray screen with lines appeared twice

  Hello

  2 weeks ago, I bought a laptop Toshiba Satellite L500/00W and today I was reading something online that this grey screen with lines to come...
  He did so twice already... I do worry...

  This could be the cause? How should I do? This happen to anyone else?

  Thank you
  Lily

  Hello

  I m not L500 owner so I can't tell you if that happened or not.
  I A200 and U400 for my company and I didn t have shown such symptoms in the past

  He signed strange s if the display changes the brightness and display vertical lines.
  It might be a problem of display or something with the graphics card.

  If you see this new symptom then I would recommend connecting the laptop for external monitor to check if the same would be visible on the screen 2.

  If the same would be seen on 2nd screen there is a big chance that and GPU would be affected.

• T-200 HP G60-white screen with the arrow of the mouse... Help! I tried a lot of things, but nothing works.

  Help! I was loading some CD last night in iTunes and let run all night. This am, I tried to wake up the PC again to a white screen with a mobile mouse arrow.  I sought the advice so far and found this informative link:

  http://support.HP.com/us-en/document/c03518165

  so I tried 3 of the 4 stages:

  Step 1: reset - MADE - always have a white screen with the mouse arrow.

  Step 2: Unfortunately, I don't have an external monitor

  Step 3: recovery of BIOS - DONE - always have a white screen with the mouse arrow.

  Step 4: reinstall the memory modules - DONE - always have a white screen with the mouse arrow.

  I restarted in Normal mode; In SafeMode... all with the same result = an empty space of the screen, a mobile mouse arrow... but I can't seem to Windows.

  Help, please.

  There are three main ways to restore your laptop to its 'Condition of the factory' - see the document on the corresponding link below.  There is a section to back up your personal files, see the section corresponding to your operating system including a video

  Performing a HP System Recovery - Windows 8

  Perform a recovery of the HP system - Windows 7.

  Perform a recovery of the HP - Windows Vista system.

  Perform a recovery of the HP - Windows XP system.

• Workin in Live View mode when I press the zoom button to focus, I get a white screen with an x 5 or a wr 10 x

  Working in Live View when I press the zoom button to focus, I get a white screen with an x 5 or x 10 written.  I do not get the image of zoom.  He just started this today and I used it for years.  Any help?  Thank you.  OH, I have a 450 d (rebel xsi)

  Thank you very much

• OS boots to a white screen with the pointer of the mouse only

  doesn't show any desktop computer

  
  BONES appears at startup but without bars, icons or background when you are finished. Displays only the white screen with the mouse pointer. Even in safe mode unless there is safe mode in each of the 4 corners of the display discription and windows at top-center

  tablerock,
  Try the items listed on this thread.
  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• YouTube does not play videos in google chrome, I see only black white screen with nothing happening.

  * Original title: youtube

  Hello

  YouTube is not playing videos in google chrome, I see only black white screen with nothing happens

  YouTube works fine under IE

  WATS the problem please say n give solution

  This problem has something to do with Dell Data Vault?

  because after I turn on my machine, I get this message... Service Dell Data Vault has stopped working

  details on dell Vault problem... reference data below

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DellDataVault.exe
  Application version: 3.9.3.0
  Application timestamp: 54cc0788
  Fault Module name: DellDataVault.exe
  Fault Module Version: 3.9.3.0
  Timestamp of Module error: 54cc0788
  Exception code: c0000005
  Exception offset: 00017126
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 16393
  Additional information 1: a539
  More information 2: 18736dd72b4a3074605a116ef5884f1f
  3 more information: c832
  Additional information 4: 3c436c3937586374ee122b3cd7b3def9

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  PLEASE HELP SOON

  Given that this problem affects Google Chrome, I ask in the forums of Google Chrome: Google Chrome help Forum

• I have just a white screen with complete audio on Windows Media Player.

  Original title: sound, no video

  I ordered a series of dog training DVD.  When I went to download the premiera and play via Windows Media Player, I have audio, but the captain was missing, just a screen dance of psychedelic images.  I've screwed around a bit and go get rid of it, but now I just have a white screen with complete audio.

  Thinking I need a plug in I released on bail and downloaded the same clip on my laptop. Same thing, only it started with a white screen.  I doubt that this is a problem with the link, but he has seen it happen on 2 different puters a wonder.  I am running Vista on my desk, I think it is XP on the laptop.

  Help?

  Hi Dave,.

  I suggest you to follow the steps from the link and check if it helps.

  The screen may appear black or green during playback when the Windows Media Player control is embedded in a Web page

  I hope this helps.

• Im not able to open pages. I have a white screen with just the border sites. Can you help me?

  Im not able to open pages. I have a white screen with just the border sites. Can you help me?

  Hello

  1. did you of recent changes to the system?

  2. what Web browser do you use to navigate the web pages?

  3. do you get an error message?

  Method 1:

  Follow the link below and check if that helps.

  http://support.Microsoft.com/kb/945385

  Method 1: Troubleshoot Internet Explorer.

  http://support.Microsoft.com/kb/956196

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  In addition, check out the link below and check if it helps.

  http://support.Microsoft.com/kb/956197/NL

  It will be useful.

• When you try to open sites, get a white screen with the title - trc.1emv2.

  Original title: Hi I have connection problems.

  When you try to open sites, I get a white screen with the title - trc.1emv2 - I left it sometimes for several minutes and nothing happens. I wonder if this could be a virus? This problem started two weeks ago, but I have not downloaded anything > it could be a virus.

  Hello

  1. have you enabled all the parent controls?

  2 do you have limited access to all Web sites?

  3. what browser do you use?

  You can view the following items and see if it helps:

  Difficulty of your web browser hijacked

  What is the browser hijacking?

  Hope this information is useful.

• White screen with the cursor of the mouse after login [Win2008, RemoteDesktopConnection]

  Hello

  My problem:
  -J' use desktop connection to a remote server remotely. Operating system remotely is Win2008.
  -Today, after the update of the victory and reboot that I can not connect with the usual account.
  -After entering password I see a short period "prepare your office...". "and then white screen with the mouse cursor. I can manipulate the slider, but that's all. No icons, no element at all.
  -Ctrl + Alt + Delete or Ctrl + Shift + Esc have no effect
  -I can connect with another account (!)

  Can someone help me?
  I read somewhere that the reason of this problem can be network drives. I have a couple of it, but not on the work account corrupted account. How to remove these records of account I have no access?

  Hi Shwed_Berlin,

  Since your question involves the use of Windows Server 2008, please join the TechNet community for assistance. They specialize in THIS type of environment Pro and will be better suited to help you.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Why some youtube videos appears a white screen with sound only, while other just work very well, these videos streaming without any problem

  Why some youtube videos show a white screen with sound only, while other works very well, these streaming videos without any problem on youtube no black screen, nothing, but sometimes once downloaded, they appear black screen with sound only? Yes sometimes when you re-download it works very well, but why?

  Hello

  (1) did you make any changes before the show?

  (2) you use internet explore? If so, which version?

  (3) is the specific question of youtube videos?

  (4) the same thing happens with the different browsers?

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  For reference:

  Why a few blank pages or incorrectly displayed in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

  I hope this helps.