White/gray startup screen on MacBook 2007

Similar Questions

• Pavilion dv7t-3000 mobile: stuck on the startup screen, must repeatedly perform a hard reset to fix

  When starting after a successful boot & use, the PC is stuck on the startup screen that is black with the logo blue & white HP in the middle and "press ESC for the start menu" at the bottom left. I have to perform a hard reset to get a normal startup. Everything works fine. I stop the PC from the start menu. At the next startup the PC hangs at the HP splash screen. A hard reset solves the problem, but the problem occurred on & repeatedly.

  Problem was solved by uninstalling a number of HP programs! Unfortunately I have lost the paper on which I wrote exactly what programs I uninstalled. If you find this issue that may arise on your notrbook, try to uninstall the HP programs

• Everything has been done to solve the problem with the FileVault have to be disabled in order to get the lights on the keyboard turns on at startup on the macbook pro?

  Everything has been done so far to solve the problem associated with the FileVault have to be disabled in order to get the keyboard lights turn on at startup on the macbook pro?

  I use FileVault. The keyboard on my MacBook Pro lights work perfectly. I'm under El Capitan 10.11.3.

• Quick help: how to make grey, white, gray lines in listbox?

  Hello

  As in the subject. How to make gray, white, gray lines in listbox?

  See you soon

  

  Apparently, Jim and I feel the same (and I need a new CTC for 2013)

  Best

  

• Laptop freezes on Windows startup screen (start)

  Freezes my laptop Envy15-3000 starting up.  It makes only to the Windows startup screen and then icons Microsoft stop moving.  This has happened since Tuesday (8/12).  I ran checks and the memory and hard drive (quick and full) test came back positive - i.e. without problems.  I finally decided to reformat yesterday (8/14).  He gets throughout the process of reformating until he wants to start the system for the "first time" (I guess this will be the last time it restarts in the recovery process) and always freezes on Windows startup screen.  If I try to hard cock off and try any other start up option I can think (Safe Mode, etc.), it says failed to retrieve and asks me to try again, get the details or Save Log.  When I try again, it goes back to freezing.  Therefore, I am now in an endless loop of another attempt of the retrieve to access the windows screen start freezing.

  All I want to do is wipe the hard drive and reload everything.  I'm not interested to recover the old data I backed everything up.  I have had no error messages on my sleeve it, memory, tests etc, so I'm at a loss on how to proceed.  Help, please!  Thank you.

  PS: I have the original 7 provided with the system recovery/windows DVD player.

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software offerings when you install ImgBurn) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and software that you may need are entering either the No. fullModel. or your notebook product number here.

  Kind regards

  DP - K

• just loading at startup screen but after loading is the screen is completely blank.

  original title: help with a Windows Vista laptop please help.

  When I start my HP Windows Vista laptop, it works very well and just loading at startup screen but after loading is the screen is completely empty. The keyboard works fine and the keyboard lights are on but nothing on the monitor. Help, please? Passing on the black screen the arrow appears, but again, it is all black.

  > @dhhuang they don't tell me because I have no guarantee and it's like over $ 100 just for talking on their phone, which I think is not worth.

  I'm sure you can order a set of recovery disks. You need to talk to a technician to do it. Yes?

• This sucker is fast. How can I extend the time, the bios displays the initial startup screen?

  I sometimes want to fool around with the bios and other items in the first startup screen, but it does not display still long enough for me to recognize the function related to the options keys.

  How can I extend the time that is displayed?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Item number of pole 2 as seen on the following example of label with barcode of a HP laptop. The barcode on your HP product may be slightly different in appearance, but will still have important information necessary for us to help you.

  #Don't post not the serial number, as it is personal information. ###
  
  Display the version of the operating system installed (and whether 32 or 64 bit) and if the CPU as a product AMD or Intel

  Not showing information as requested will delay our responses and troubleshooting slow the question that led you to create a thread.

  Normally the F10 is the key used to enter the BIOS of a PC HP. Begin to type the F10 key as soon as your press the power button

  Best regards

  ERICO

• Windows 7 stuck on the Windows startup screen. Help!

  I was playing a game (Counter Strike: Global Offensive - on Steam) on my PC I got the blue screen error was 0x000000A3, after that I booted my PC then it got stuck on the Windows splash screen. Now, when I start my PC it gives me only 2 options, "start Windows normally" which leads to frozen Windows startup screen and it gives me this: '(recommended) launch Startup Repair' that I have used and tried all the options, except the command prompt like I do not know how to use it.

  My PC is a Windows 7, Asus

  Hello

  Often, this will work when the built-in repair software will not.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Reinstall Windows 7 Pro on new 2 TB HDD freezes on Windows startup screen

  My 160 GB hard drive crashed and I am trying to install Windows 7 Pro from the installation disc that came with my computer on my new hard drive 2 TB.  I read the posts that took even freeze on Windows startup screen and I disconnected all devices and devices except the mouse and keyboard.  I don't have 2 GB of memory simms, 8 GB installed, but has released simm all but one.  I tried to reinstall Windows 7 Professional several times and whenever it crosses the screen of facilities, then when the computer restarts it freezes at the Windows startup screen.  Help!

  Evelyn,

  (1) I have an idea which may simply not work. Install the software of Western Digital's Data LifeGuard Diagnostics.

  (2) then select / click on the Seagate 2 TB of disk.

  (3) then click on the little icon above the list of player who scored "click to run tests.

  (4) in the popup windows choose the option "write zeros". Click 'Start' and select the fastest two write options who writes zero for beginners / before the command and at the end / last sectors on the disk. It will take about 2 minutes or less. Once the zero finished writing your drive will be in a State of 'Raw' (just as if you removed from the box for the first time).

  (5) open "Disk management", you should see a windows asking you to 'Initialize' the reader. Choose the MBR (Master Boot Record "option.

  Now try to install Windows.

  J W Stuart: http://www.pagestart.com

• How can I keep my youtube video / audio running while in the startup screen?

  I installed Window 8 the day of that release.

  I want to be able to play (keep running) a video from Youtube (not do stop playing) if I go to the start screen. This can also apply to other applications.

  I know already snap and run both applications at once on the screen (why only 2?)

  I want to be able to watch/listen to the vid when I go to the start screen.

  Thanks for the help

  Hello

   
  Thank you for using Windows 8. I've surely you will help find a solution on the issue.
   
  
  Some applications that are installed on your PC could not be pinned at the beginning. But you can still pin them if you want it. On the start screen, open the charm of the search, select the application you want to pin to open his orders and then press or click on PIN to start.
  To learn more about customizing the startup screen, refer to the article.
   
  Get to know Windows
  http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1
   
  Hope this information helps. Please reply back with the State so that we can better help you.

• HP Pavilion DV4-2045DX at startup screen 'black '.

  My HP Pavilion DV4 at startup screen 'black '. It normally happens with all audio prompts password and subsequently entry, audio acceptance... password screen but 'black '. This problem is intermittent, but happens on a basis more common. Any suggestions would be greatly appreciated.   Peace

  Screen is black from the beginning. Hooked up a monitor to laptop and everything's fine. Appears to be a screen, a problem of connection or link screen. Thanks for the input.    Peace

• I have Photoshop CS5 in my old Macbook (2007) and want to have it in my new Macbook Pro (2012).  What is ways options to get it in the new?

  I have Photoshop CS5 in my old Macbook (2007) and want to have it in my new Macbook Pro (2012).  What is ways options to get it in the new?

  You can download CS 5 below the link:

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

  Just in case, if you get an error when installing CS 5 as Setup is damaged, you shud eject a disc, see link below:

  https://forums.Adobe.com/thread/2003455

• Bug Yosemite gray iMac screen at startup

  Hi all

  Hi all

  I come after you on a bug that makes me creasy for several days now...

  My iMac late 2009 (screen and hard drive have been changed 3 years ago) under Yosemite 10.10, which worked well decided to bug at startup:
  After a classic boot - logo apple with the loading bar - loading for 1/4 - after gray screen and stay like that.

  Here what I did:
  -Restart the RAM P: unsuccessful

  -restart without extensions: success - so I got permission and clean the disk and restart - unsuccessful

  -reboot with HD recovery: repeated failure

  What should I do?

  Thank you for your help...

  Benjamin

  Hello to you all,

  I allows me to ask for your help on a bug that is beginning to take the lead for a few days...

  My computer, iMac late 2009 (slab screen changed and DDI changed 3 years ago) under Yosemite 10.10, DDI partitioned into 2 (data and system) running perfectly up to now has decided to me dropped from the start:

  After a classic start - Apple and bar loading appear - loading Pendant 1/4 then fixed gray screen - and then nothing.

  This is the operation performed:

  -J' blew the PRam repeatedly: without success

  -Restart in 'safe' mode: that a market so the disk cleanup and repair of the authorization, but same result

  -recovery of reboot in HD mode: it worked also, but after downloading I still the same result.

  So what to do?

  Thanks for your help

  Start - gray screen at startup - Yosemite

  Resolve startup problems-

  Resolve startup problems - (2)

  Resolve startup problems - (3)

• MacBook Pro with the letter N in white on my screen!

  Hello

  I have a strange problem and that there is persistent character display on the screen of my MacBook Pro.  It is located on the left side about 1/5th of the edge left and about 1/3 down.  It is white with grey background.  Anyone know what it is?  I've seen it before and it disappeared on the last update, but came back 2 days ago.

  Can you provide a picture and a screenshot?

  Screenshot for us a see if it's software or hardware, photo, so we can see what it looks like.

  Instructions on how to take a screenshot.

• White gray screen of death

  A recently obtained a Rev B G3 iMac, updated the firmware once so I could try OS9, and two days in the HARD drive made this death rattle and crashes hard

  Wonderful.

  So I order little ram from OWC (2 x 256 MB)

  A 128 GB SSD home (very disappointed because they include an adapter + SSD and it is not just a SSD IDE or made to be more integrated.)  Too expensive for what it is),

  and a new battery of LANDAU

  Repinned new fan Cooler Master 92 mm to replace the old (works perfectly)

  Starts and... gray screen.  No folder, nothing.

  Try resetting the NVRAM with Command-Option-P-R and he did once successfully, but no change in the results.

  Try Open Firmware with Command + Option + O F and it will start but the CRT remains off and the power light stays orange.

  NVRAM later tried and he won't even be deceived, forced to do other ways to become more involved.  Still no change of result

  Try holding Option at startup, nothing.  Tried holding C at the start, nothing.  Tried holding O during the boot since I heard some Macs to bring up the boot with it instead, Manager nothing.

  Tried 2 other keyboards, nothing.

  I even tried 2 other internal drives CD/DVD slim just in case I got fried somehow the original drive 24 x CD, nothing.  External hard disk is not no longer works.

  Recognizes to all readers and keyboards, powers, them and the readers try not seeking, still no results.

  going to try different hard disks and resetting the ram, replace it with the original of the ram, etc., but hoped someone had an answer for this miracle.  Hope that I didn't somehow make fried logic board or screw up somehow.

  I was hoping to keep this one close to stock (at least that I found one of these Harmoni 600 mhz cards miraculously) and a slightly less desirable another iMac G3 as my project to empty out and replace internal components with a Mac much more modern (Apple would be cool with this right?  Wouldn't a Hackintosh I think)

  If there is no operating system on the new drive, it won't start (with the exception of the optical drive with a Mac OS installation disc).  Startup Manager is accessible by pressing the Option key during the boot, not the O key. I don't remember if the iMac G3 tray-loader has Startup Manager.

  I think you've changed too much at the same time, so it is difficult to find the change that caused the problem.  Try to put the original RAM until make you it work.  Some of these original iMacs do not work with the RAM (unofficial) max of '2 x 256MB.'  Put the original optical drive, if it was working before.  If you have a standard IDE hard drive that is less than 128 GB, it would be a good idea to install it to rule out the possibility of an incompatibility with the SSD + adapter.

  What installation disk of Mac OS that you are using the optical drive to start?

  NOTE: Once you are able to boot from a Mac OS installation disc, the iMac G3 tray-loader requires the startup on the internal disk drive to be on the first 8 GB of disk space.  Due to the older IDE used in these iMacs controller, only the first 8 GB of disk space are available during the boot sequence.  After starting (when the full operating system takes over), the iMac may access up to 128 GB.  You need disks larger than 8 GB partition as the first partition is part of the first 8 GB of disk space.  A security dimension to the first partition is about 7.5 GB, with the 2nd partition using the rest of the disk space.