White lines in the tables

Similar Questions

• White lines in the table

  I am new to the use of Dreamweaver and I was trying to make a website composed of images. I created the template on Photosho CS2 and then I slice them and I'm doing my site in Dreamweaver using tables.
  
  I started doing 1 line and column and then I continued on by splitting of cells and to make my site but it does not come out right. I have these small white lines between rows and columns. I tried to press (ranging from all rows and all columns), but still nothing changes. Here is a screenshot of what my site looks like:
  http://img352.imageshack.us/img352/7653/untitled1fz7.jpg
  
  Can someone please tell me what to do to get rid of those white lines. Also, I checked the code and I see no tag so it cannot be that.

  Problem is some parts are normal as mentioned Osgood and parts are not. The only thing I can think is nested tables which I don't know is a good idea.

• Qosmio G30 - white lines on the screen and BSOD

  1. I have a Qosmio G30
  2 operating system Windows XP MCE
  and I have problem "white lines on the screen ' when windows start to load after that I got the"blue screen of death"and restart the computer.
  I try to get back, but unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I finished to recover I have "windows loading files" and once this is done, it shows me the so-called "blue screen of death"...

  Hello

  I m afraid. I have bad news for you ;(
  I think you ve you have a problem with the hardware in my eyes, there might be something wrong with the GPU chip.
  The white lines on the screen could be related to a faulty graphics card and get the BSOD error due to a hardware malfunction or software serious questions

  I m sure that the recovery CD does not contain software problems and therefore only the fault of hardware could be the reason for the lines on the screen and the BSOD.

  In my opinion, you should contact the ASP in your country for assistance if all goes well you guarantee is valid.

  Good luck

• Satellite A300-1IL - monitor has white lines at the bottom

  Good evening

  about an hour, followed by my satellite a300 monitor has white lines at the bottom.
  I try to stop, change the resolution but i just turn on my laptop, the screen has this white line.

  It is a problem of monito'rs or videocar problem?

  Sorry for my ebglish

  Hello

  > It is a problem of monito'rs or videocar problem?
  It's easy to say; you need to connect the external monitor to the laptop and need to check if the same if possible lines on a second external display.

  If the lines were visible on the external monitor, so that the GPU fault is possible.
  Otherwise, it may be defective internal display.

  Welcome them

• White line in the status of timecode window - UI glitch

  Here is a screenshot of what I mean. Anyone else get this UI glitch? (white line across the timeode / share status).

  Thank you!

  MMostly everyone.

• When I save the Image, the file has an extra white line on the right edge. How can I stop this artifact occurs?

  When I save the Image, the file has an extra white line on the right edge. How can I stop this artifact occurs?

  Nevermind, I've updated the app and the problem was solved.

• How to set the text in the last line of the table to be bold

  Hi all
  
  I have two tables in the report on my page and I would like to have the last line of the table as a "BOLD" text data.
  
  I found a jQuery selector to select the last row of the table, but I do not know how to implement it in the Apex. I want to control what table will have changed last row and who won't.
  

  $("tr:last").css({backgroundColor: 'yellow', fontWeight: 'bolder'});

  Could someone help me how to create a dynamic action to accomplish, or if y at - there another solution?
  
  My test app:
  
  user name: [email protected]
  passwd: kurintest
  appl: REPORT_APPL 12451
  
  Thanks in advance,
  
  Jiri

  Nico Martens wrote:

  PS: If you worry about sql plsql context switching, use a box instead of my function. Which probably could increase performance.

  Using this technique , analytics, and casewould be more effective and offer the best separation of concerns:

  Source report

  select
            product_id
          , sum(quantity_on_hand) qty
          , avg(quantity_on_hand) avg
          , case
              when   count(*) over ()
                   = row_number() over (order by product_id nulls last)
              then
                'bold'
              else
                'normal'
            end font_weight
  from
            oehr_inventories
  group by
            rollup(product_id)
  order by
            product_id nulls last
  

  HTML column expression

  #PRODUCT_ID#
  

  Avoid generating HTML in the query when it is possible that its impact on the ability to use the features of declarative report as column sorting and setting in the form. (See examples on page 3)

  If you have a table with 100 rows and you show only 15 lines. Do you want the 15th line "BOLD" or just line 100Le.

  It is really the important issue here. If the reports do not use paging and always show all lines, then it's trivial to implement using dynamic Action (as shown on page 2):
  H4. When

  Event: After refresh
  Selection type: jQuery Selector
  jQuery Selector: .report-standard

  H4. Real Action

  Action: Run the JavaScript Code
  Fire on loading the Page: Yes
  Code:

  $(".report-standard tr:last-child td").css({backgroundColor: 'yellow', fontWeight: 'bolder'});
  

  (Here is to use appropriate DA / jQuery selectors to make sure that only reports including totals get this formatting applied...)

  For more complex presentations, a report of custom line model is the way forward, as in the link in the previous thread of the OP: + {: identifier of the thread = 2436912} +.

  Also note that the columns hidden, based on the GROUP_ID/GROUPING/GROUPING_ID functions are very useful in these reports. They can be used to report conditions of line to avoid the additional conditions to be ready in the query (as in the case above) and provide the break several levels of formatting.

• Added new line in the table

  Hello
  
  I have a table inside a panelCollection. When I press the button Add a new row (plu green) the empty line newly added appears in a random place in the table, but I want to appear as the first line of the table (top of the table). How I do that?
  
  Thank you very much
  Will do

  Will do,

  It is a weird behavior that was introduced in JDev 11.1.1.4. We fixed this in the next version by adding the new line always above the current line.

  You can do two things:
  -Make sure that the size of the range of the iterator binding is greater than the number of rows displayed, in this case the new line will be created directly below the current line
  -extend the JHeadstart TableBean class, override the createNewRow method and create a line in the first line

  Steven Davelaar,
  Jheadstart team.

• White line on the horizon

  I have a Sony Alpha a200 camera. Often, when I use the fetue color to desaturate blue to darken the sky an apears on the white line on the horizon or agaist another object that crosses the sky. Anyone know why or how to remedy? What is a thing of the camera or something in lightroom? I think it would be possible that the line is already there, but everything just not visible until the sky are obscured.

  You have a few lenses chromatic aberration (CA) which can be cleaned using the profile of lenses. If there is no profile for your lens of camera available, you can use the Chromatic Aberration sliders manual tab.

  The next suspect is the fill and recovery tools. When used with high settings above about 35, you can get a side effect during transitions of high brightness as the sky behind the lighthouse. The STL luminance sliders are just accentuate the effect of edge.

  Try to fix that and then set the fill and recovery at 35 or less. Also check your sharpening settings, which, if the market value amount too high can cause a simlar 'halo effect' on the edges.

• Toggle buttons control according to the selected line in the table?

  Hello
  
  I have used JDev 11.1.1.2.0
  
  On my main page, it has a query section and view the result to a component of the lookup table and also has functioning as (update/deletion) buttons in the toolbar.
  
  I want to toggle buttons operating according to some value of the selected line in the table, and I searched on the OTN forum, found more than issues like that, but seemed no found a good solution.
  
  The table is a unique and has a status column selection, its data type is integer, and I want to activate the buttons when the value of the status field of the selected line is 0 or 1, disable the buttons when the State value is other values.
  
  Code of the table as:
  
  < af:table value = "#{bindings." Var VO1.collectionModel}"="row ".
  lines = ' #{bindings. " VO1.rangeSize}.
  emptyText = "#{bindingsVO1.viewable?" '} ". No data to display. ': 'Access Denied. »} »
  fetchSize = "#{bindings." VO1.rangeSize}.
  rowBandingInterval = '0 '.
  filterModel = "#{bindings." VOCriteriaQuery.queryDescriptor}.
  queryListener = ' #{bindings. " VOCriteriaQuery.processQuery}.
  filterVisible = "true" varStatus = "vs."
  selectedRowKeys = ' #{bindings. " VO1.collectionModel.selectedRow}.
  selectionListener = "#{bindings." VO1.collectionModel.makeCurrent}.
  rowSelection = "single" id = "resId1" >
  
  Operation code buttons like:
  < af:commandToolbarButton text = "Update" id = "ctb2" action = "editDAF" / >
  
  Any suggestions would be very helpful.
  
  Thank you
  zeroxin

  Hello

  bind to the attribute in the PageDef file for the status field. Then configure the PartialTriggers property button to point to the ID of the table. Of the disabled button property then points to the status as attribute link

  #{bindings.statusField.inputValue == 'value'}

  Frank

• Add lines to the table of results

  Hi all
  
  A table of results page updated, I have one called submitButton 'Add' to add rows at the bottom of the table to create a new record.
  Wrote a method create in AM, but it's always add a new line to the second last position.
  
  How to add a new line to the table after the last record?
  
  
  Thank you and best regards,
  Patricia

  In your method of AM

  You can use following code in AM

  VORowImpl row = (VORowImpl)vo.last();
  vo.setCurrentRow(row);
  vo.next();
  VORowImpl newrow = (VORowImpl)vo.createRow();
  vo.insertRow(newrow);
  

  I hope that helps!

  Thank you
  AJ

• Add the line in the table of the ADF

  I am trying to add a new line to the table of the ADF. Here are my steps:
  1 create new entities to tables (new-> EJB-> entities from Tables)
  2. create the Session Bean (new->-> Session Bean EJB) with all required methods for earlier of the entity created
  3 create the control of data off of it (right click-> session bean create a Data control)-, it creates 'testFindAll '.
  4. After these steps, I drag / drop my "testFindAll" of data controls to form and create the table
  5. now I do drag & drop operation Create since my 'testFindAll-> operations", create a button and move the action to create CreateInsert
  
  And now, eating disorders: ((...)) When I click on the button to add the new line I get null pointer exception. Here is the part of the trace:
  
  java.lang.NullPointerException
  at oracle.adf.model.adapter.bean.UpdatableBeanDataControl.createRowData(UpdatableBeanDataControl.java:137)
  at oracle.adf.model.bean.DCBeanDataControl.createRowData(DCBeanDataControl.java:642)
  at oracle.adf.model.bean.DCDataVO.doCreateData(DCDataVO.java:870)
  at oracle.adf.model.bean.DCDataRow.create(DCDataRow.java:306)
  at oracle.jbo.server.ViewRowImpl.callCreate(ViewRowImpl.java:432)
  at oracle.jbo.server.ViewObjectImpl.createInstance(ViewObjectImpl.java:4679)
  at oracle.adf.model.bean.DCDataVO.createInstance(DCDataVO.java:567)
  at oracle.jbo.server.QueryCollection.createRowWithEntities(QueryCollection.java:1818)
  at oracle.jbo.server.ViewRowSetImpl.createRowWithEntities(ViewRowSetImpl.java:2211)
  at oracle.jbo.server.ViewRowSetImpl.doCreateAndInitRow(ViewRowSetImpl.java:2257)
  at oracle.jbo.server.ViewRowSetImpl.createRow(ViewRowSetImpl.java:2233)
  at oracle.jbo.server.ViewObjectImpl.createRow(ViewObjectImpl.java:9404)
  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1223)
  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2120)
  at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:464)
  at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:217)
  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:176)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  ...
  
  
  I know I can do it if you create ViewObject rather than Tables and SessionBean entities. But I need this approach.
  
  Thank you very much!

  Hi Goran,

  What is your version of JDev? You try with EJB 3.0 or 2.1? I just tried (with 3.0) and it works fine (tested in JDev 11.1.1.2.0).

  Here's my pagedef

  Infact, I don't have to change the action of creation at CreateInsert. By default, it is CreateInsert only.

  Arun-

• Removal of white line in the CSS formatting

  Hi all

  I hope that one of you has experienced many can help a beginner (new!)

  I've been dealing with CSS and build my layout with it instead of tables, following the advice of some of you guys here. He's doing much so far, and I can see why you recommended, but I hit a roadblock.

  At the top of my page, in a div tag, I have my image in the header. Just below that, in a new div, I have an indefinite list of words which I arranged in a single line. Lower than that, again, I have another image.

  What I want is for each of these layers to flow from one to another, without any white space in the middle (my background is white). There is no white space between my list of words that are on a green background, and the image below, but between the top image and block the green background which is my line of words, there is a white line.

  I tried everything in my limited arsenal of "expertise", which amounts to try the margin = 0 tags on the top image and the line of words, but little matter what I try, the white line will not disappear. I've rechecked to be sure, and it is not part of the image. When you insert a picture in html using the CBC, DW automatically adds a white line underneath that you can not delete it in CSS?

  I can put up a screenshot if that helps?

  Thanks in advance for anyone who can help me. It is the engine of my nut of mind n00b!

  Best wishes to all,

  Jack.

  For the best answers here, please download your test files page and no dependents on your remote server and post a link so we can see in our browsers.  Also, please tell us which browsers you see cela in.

  My best guess without benefit of your page appears, you have a few lines of browser by default & padding appearing around one or two images.

  In code view, add the CSS inline style to your images as follows:

  style = "display: block" src = "image1.jpg" > "

  style = "display: block" src = "image2.jpg" > "

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• 'Lines' of the table does not automatically extend as added content?

  This is a table of Storyboard, built with a simple table.  Three columns: one for the images, one as a spacer, a text.

  I did the storyboard to the origin in the Pages, and then converted in Word to work with a partner, now converted to Pages yet.  It seems to be OK except for one thing:

  Before, when I would write in the text of the text column... the line would extend automatically as the text was written, at least in the size of a page.

  Now, I think lines are somehow "locked" and does not (at least one page), extend this text and images, are "hiding" because the line is not normally develop as she would have.

  Is there some click preferably a place that keeps my lines to a constant size, any content is in every cell?

  Or maybe it's a corruption caused by going to Word and back?

  All ears,

  Ben

  V4.3 Pages ' 09, or permit Pages v5.6.2 splitting a line beyond the limits of the page, so limit the content of text in a cell a to a single page. I just copy and paste a page full of text and he dropped in the first row, cell 3. It is automatically extended to the bottom of the page and not details. There is no hidden settings in Pages that will be substituted for this limitation.

• HP Jet 7: Black screen with white lines on the HP 7 stream

  I bought my HP 7 stream about 2 years ago and I'm now a black screen with white lines whenever I turn on the tablet.

  Can you kindly help.

  If that's what you see immediately when you turn on, the graphics have not to the Board of Directors.

  These tablets were dropped after the first year of release, and it would not be worth the cost if it could be repaired.

  I'm sorry.