(White) Panel control?

Similar Questions

• White Panel - Control Panel does not open

  Control Panel does not open

  I had printing problems - this workstation is connected to a home network and will not print.  Instructions suggested that I check my printer controls.  However, when I choose Control Panel, only an empty white box opens - and then closes.  How can I fix my control panel?

  Hello

  ·         It is a network printer, or is it connected locally?

  ·         It worked before?

  ·         You get the error while trying to print?

  (1) we will try first to resolve the issue of Control Panel.

  Run the System File Checker tool.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WHEN I TRY OPENING WINDOWS EXPLORER PANEL CONTROL CLOSE DOW.

  I can't open the control panel.  I get a message "windows Explorer" closing."

  1. make sure that the computer is virus-free
  Use Malwarebytes:
  http://www.malwarebytes.org/ ... pickthe free version.

  2 run a file system check to ensure that none of the corrupted files.
  http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

  3. run a disk check for corruption and possibly repair errors and bad sectors on the hard disk.

  Start button > Search box, type cmd > look up, right-click on cmd.exe > Run As Administrator > in the black and white window, at the command prompt flashes, type chkdsk/f/r > press the Enter key.
  Note: there is a space between 'chkdsk' and ' / '.
  The screen will say something like cannot do it now, but you want to run it on reboot. Click on 'y' as in Yes > press > window cmd of output.
  Restart your computer. It will take quite
  some time. DO NOT stop the machine. Just wait.

  4. optimize performance
  http://support.Microsoft.com/kb/959062

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• Qosmio F20-155: error after the beginning of the control panel controls

  I installed Win 2000 on a Qosmio F20-155 computer and I get an error like this when I start the TOSHIBA controls control panel. Could someone help me please?

  "An error occurred while windows was working with the Control Panel file C:\Program Toshiba Toshiba Controls\ToshSrv.cpl.

  Hello

  I checked the page of the Toshiba driver and there is no drivers Toshiba for W2k on the Qosmio F20. Where did you get the drivers of control?
  You need a driver for Toshiba in particular to use the commands. But there is no driver for W2k. In this case, the controls cannot function properly.

• can't see the front panel control

  I took over a program written in LabVIEW 2013.

  When I right click and select find control on a control path in the block diagram, the Panel is displayed, but I do not see the trajectory control.

  Control is not * hidden, because the choice for the control to hide to the shortcut menu is available.

  The façade is divided into two with a separator. -What is the cause?

  EDIT: The control is in the left pane. Y at - it a trick to know is where is the control?

  I guess that's outside the visible Panel. Maybe if you double-click on the terminal, the control is selected, and you can move with the arrows until you see.

• Put option on the page does not work in the Easy Print VI Panel, controls tabs are not displayed

  Found two problems with the screw of report generation:

  (1) in the Panel of VI feel easy (report generation) or the Documentation.vi, the layout options don't work (dug in the sub - VI and found that they are not connected to anything).

  (2) If you have the controls or the lights in a tab control and try to use the Easy Print VI Panel or Documentation.vi with the option to include controls in the report, they do not appear. The only indications/commands that appear are those that are displayed on all tabs (that is to say, to create a control and move it over the tab control so that it appears on every page).  There's a Subvi (Expand_control_ref_with_nested_controls.vi) which is called to handle the nested controls (IE, grapes, berries, etc...), but it should have a case to handle the controls tab.

  Hey Sajosie,

  Dig into the Sub - VI you are right in saying that the Options available to the user input is not connected to anything for most cases. However, in the case of failure to "Quick Print" Layout Options are used to change the layout of the report. In help for this VI, he mentions that this entry is ignored for the report "Standard reports" and "HTML" options However, it does mention that this ignorance of Layout Options is expected for the 'word' or 'Excel' reports.

  Especially regarding the controls and indicators in the report which appear on the tab controls, I can make a product suggestion to do this kind of design more compatible with the mere impression VI Panel façade or Documentation.

• I have the same front panel control in several events?

  I tried to find it in the forums and knows that there must be a simple answer, but being a left tackle L again, this one is cheating on me. So:

  I'm programming a small mission-generating program that will allow a user to create files of the mission for a small underwater AUV. These mission files can be created in Wordpad or similar, but I wanted to make an application where the user doesn't have to worry about the sometimes finicky syntax etc. The operating system of the AUV is based on linux. It is also a good opportunity to practice my LabVIEW file, management skills and experience programming state machine.

  I created a state machine, and is one of the States 'Add Primitive'. A primitive is one line of text that can be 'go to xyz', 'surface' etc. 'home' with the coordinates or other settings entered on the controls on the front panel when the appropriate primitive is called. I there before had 8 orders of the Panel before the user can choose to primitives with and structure of the event with a pane for each control. Each event, then displays string writing for this primitive controls and property nodes hide everything on the front panel.

  My problem is, I want a "Validation" button that will write the primitive duly filled in the file and display the file so far in a preview window. I can only put this button of validation in an event well and I can't use local variables. I want the same façade of control are committed to do the same for all the different events in my structure. Is this possible?

  I think that maybe the control and my preview pane should be outside (to the right) my structure. Or maybe a case of event isn't the right way to go at all. Any suggestion would be appreciated.

  Thank you

  I recommend some redesign of your state machine.  You should have a State just to handle events of the user (have the structure of the event in it).  The start State should go directly to that State of "idle".  You can then manage each button with the structure of the event rather than do an interrogation of sorts.

  In each case in the structure of the event can determine what State to spend.

• Scan to computer option removed the Panel controls after update?

  Hello

  Normally, you can choose the option to scan a document in the Panel, and then you have another screen where contrast you where able to choose the DPI...

  But, as you can see, now after an update, the option "Analyze a document" is part...

  I can still ride to scan to the right of the printer, but I can't work with the contrast and other things, which is neccesairly for me.

  So, if someone could tell me why it was deleted, or where I can find the options again?

  Thanks in advance

  Useful info
  Photosmart HP 5510

  Windows 7 64 bit

  

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Photosmart 5510 and click on Uninstall.

   

  2. then go to Control Panel > programs and features

  • Photosmart 5510 -click and then click on Uninstall option
  • 

  3. then download the software on the HP web:

  •  Photosmart HP 5510 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• How to convert binary data from the Panel controls in ASCII values?

  Hello

  I seemed to face a roadblock with how to convert binary values in ascii.

  I created this .vi to save all control values in an .ini file and call them at that time where I will carry out the .vi as shown in the file attached. Registration key to simply save the data and Cancel button discards all current changes.

  I would like to understand how to retrieve all the values of control to ASCII, so I assign to a global variable for later use. I've looked everywhere for a good reference document, and I couldn't find one that would explain my question. I would be greatly appreciated if someone could point me in the right direction.

  Thank you

  Sam

  I tried a simple way to save control values in the front panel

  Not reinventing the wheel, when there are ready to use of solutions, for example:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209753

  Use the MGI save & restore settings VI of the palette (for example, it records all the settings that have been changed in a graph, which is very useful) and the MGI Save (restoration) Front Panel data live (to save and restore control values in the front panel).

  Here is an example:

  

• Does anyone know how to control the characteristics of police in a table with a front panel control?

  It seems that it should be simple enough.  I want that the user can adjust the characteristics of police of an array of numbers with some controls on the front panel.  I know how to do this using the drop down menus - but I want my users to do with the controls on the front panel.  I looked at the options property node and it does not resemble anything in here would help...

  Thanks for your time.

  j.

  Right-click on a digital control in the table and choose Create-> property Node-> NumericText-> police-> size.  Change to write and this allows to adjust the size on the fly.

• How to uninstall when the panel control does not allow me please.

  I had taken to the repair shop and worse problem yet, they installed Avast anti virus but it stopped because of the record that I was an insured person I have avg still impossible to uninstall and re install avast? WOT I do like not p.c. also savvy pc used to system recovery?

  Thank you tim

  Hello

  (1) what is the exact error while trying to uninstall in Control Panel?

  (2) how you try to uninstall the program from the control panel?

  Check the below link that can help you in the matter of fixing. How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Hope this information helps.

• I have Vista and I can not program to open my Control Panel control or office told me application not found

  I have Vista and I can not program to open my control panel or office

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  You probably have an association bad .exe. Try the fix for this.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Hi... hp officejet pro 8600 white Panel

  Hi, I'm new to the forum.

  I'll get straight to the point

  I bought the officejet pro 8600 AiO

  After 3 weeks of use my Panel turned to white. I tried to reset the printer to advice provided by experts on the other post but nothing happened.
  Can you please tell me what can I do myself to put it back as it was. Or I have to send my product to the HP service center?

  Hello

  Please perform a factory reset by steps has sent a private message.

• Configuration/program - white Panel

  I went to uninstall a couple of programs inside the control panel. So I clicked on the programs, and the next window was completely empty. Click No icons, nothing.  What Miss me? I clicked on several other icons within the Control Panel, and these open empty windows as well. Thanks for any help.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps mentioned below and check if it helps:

  Method 1: try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Additional information:

  Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

  Hope this information is useful.

• Windows Vista does not work - cannot open Control Panel control and IE

  original title: Windows Vista does not work properly.

  Hello

  I have Windows Vista Home Premium running on Lenovo laptop. Recently, I cann't open the browser IE, the same panel. I don't have a Vista CD. But I have the product key provided with the laptop. Please, help me to make it fully operational as before.

  Assuming that you can always connect to your computer in normal mode:

  Run a check of the filesystem to find corrupted files and repair them if possible.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click run as
  Administrator > in this window type cmd black and white, on the
  flashing fast sfc/scannow > press the ENTER key.
  Note: there is a space between
  'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  After that, check if you can run the computer as well as to access the IE.
  If IE still does not work, use the following tutorials...

  1 Internet Explorer does not start or stop responding
  http://support.Microsoft.com/kb/926449
  Note: It has an auto FixIt application. Use it.

  2. Internet Explorer Add - ons problem when IE hangs or freezes
  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us
  Note: there also an Fix It self.

  3. to resolve network connectivity problems in Internet Explorer
  http://support.Microsoft.com/kb/936211