White screen on Satellite Pro L30-101

Similar Questions

• White screen on Satellite Pro L300D

  The screen on my L300D is not empty, no idea why, I tried using another monitor and its blank again.

  1. is the screen fucked?
  2 or... would it be the graphics card?

  Need help as its working well for 5 years passed, and I can't afford to replace it. I have been informed that a new motherboard could cost NZ$ 600 more work, so its more viable to replace if that is the case.

  Paul

  > The screen on my L300D went not empty, no idea why, I tried using another monitor and its blank again.
  It is very suspicious, and it is possible that this graphics card died. It's the worst case scenario, and in this case the motherboard needs to be replaced. Problem is that new motherboard is very expensive and best solution for you is to buy the new laptop.

  One last thing: start the laptop computer you hear sounds and y at - it a white screen of reaction exept?

• Broke the screen on Satellite Pro P100 - 1 1/2 "vertical white line

  Hello
  I have a Satellite Pro P100 which is only 21 months old and have recently acquired a white strip to the bottom of my screen which is located near Center. I looked into the possible solutions for this and followed the instructions carefully to see if it was a software problem which he seems not to be. The only possible solution seems to be to get the screen replaced. I would like to know if there are many of you who have had this same problem because I'm disgusted that I need to get this replaced so early in his life.

  I don't even use my phone as a laptop (IE it transport etc.) it is simply sitting on my desk at home. I just checked my warranty and apparently it was submitted only for 12 months! Just my luck!

  If anyone has any suggestions on how to best to argue my case with Toshiba in get this replaced for free then the answers are welcome.

  See you soon,.
  Corrina

  > Only possible solution seems to be to get the screen replaced

  Either it's a display or the fault of the graphics card!
  You can try to connect the external monitor to test if the same would appear on the second monitor.
  If the question seems not on the external monitor then it s not a graphics card issue but possible display of the laptop problem.
  In this case, the authorized service provider should be able to provide more details and how to fix it.

  Good luck

• Cannot adjust brightness screen on Satellite Pro L650

  Hello
  I am running Windows 7 64 bit on my Toshiba Satellite Pro L650 and I cannot adjust the brightness of the screen. Fn + F6 key and Fn + F7 do not work and there is no entry for it in the control panel.
  I tried to download drivers VAP 1.4.1 as explained in Toshiba newsletter help, but there was no need for this template.

  Could you please help me with this?
  Thank you
  Stone

  Are you using the original OS that you got with your laptop or your own installation of the OS?

  As far as I know it should work with the settings. If you have changed something?
  You can use other fnctions FN?

• Screen with Satellite Pro R50-B-14U problem

  Hello

  I was just given the Satellite Pro R50-B-14U pc.
  After I upgraded from 7 to 8. 1 and I did the updates Toshiba/windows screen randomly goes off, then on again after a second at intervals of about 1/2 hours.
  I tried to uninstall and reinstall the video drivers, but the problem persists.

  How can I fix it?
  Thank you.

  According to the specifications of the laptop you original Win8.1 DVD facilities, so I assume you are using for the installation of the OS.
  Have you noticed these problems immediately after installing the OS or later after the installation of updates?

• Black screen on Satellite Pro C870-1CJ

  Good night

  I have a portable Satellite PRO 1CJ C870. A few days ago I got a blue screen showing display problems and since then, the laptop screen is black and there is no picture shown in it. I am entered mode secure and tried to connect it to a VGA monitor with success.
  As I guess it was a problem with the graphics card then in the blue screen message, he made atikmgpag.sys that I tried to install the latest version of the graphics driver t but no news on the laptop screen.
  I also tried Toshiba Tempro, which has not had the success also. I have tried several things without result.

  Can anyone help me to solve the problem? I'm a bit desperate.

  Thank you

  Gabriel

  As far as I know your laptop Satellite Pro C870-1CJ was equipped with two graphics cards:

  1 - internal Intel Graphics HD 4000, which is part of the Intel CPU
  2 external ATI Radeon HD M 7610

  The error that contains information about the atikmgpag.sys file seems to be related to the ATI graphics card driver.

  I'm not sure, but it might be possible that the graphics chip from ATI external began to malfunction.

  Anyway, if possible, try to retrieve the laptop as mentioned by Liam
  If this is not possible, the material may be affected and it could be costly to repair.

• Impossible to change the bright screen on Satellite Pro C50-A-143

  I run windows 8.1 and I could not change the brightness of the screen for a while now.

  It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

  According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
  I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

  Is this correct?

  Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
  Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

  Then you should be able to use the function key to decrease and increase the brightness of the display.

• Upgrade the screen on Satellite Pro C50 - A - 1 K 9

  Hello

  I recently bought a Toshiba Satellite Pro C50 - A - 1 K 9 and I am very happy with it. However, I was wondering if there is a way to upgrade the screen for a full HD, one? And if yes, can you point out some retailers to do this, instead of the United Kingdom.

  I did a quick search online, but couldn't see anything. Currently deprived of sleep with my studies, so I'm not myself confidence haha.

  Thanks in advance.

  Fraser

  As much as I know these upgrades are not taken in charge and it is not as for me that Toshiba offers several different screens for each laptop model. In my opinion, you should contact Toshiba service provider in your country and ask if a different view can be used on your machine. They have access to the database of Toshiba and can verify this.

  In general the laptop is as a sort of package of different hardware components. Some of them have the best hardware configuration and cost more than one sort of standard notebooks.

  Until you bought your laptop have you checked specification of the notebook?

• Replacing the screen for Satellite Pro L10

  The screen is cracked badly on my Satellite Pro L10. About how much can I expect to pay for a replacement within the United Kingdom. Is this something that I can wait to replace me with a screwdiver and some care?

  How much would a complete hull and the screen?

  Where can get me a - Toshiba service center my best bet?

  Hello

  The fact is that the screen of the laptop is one of the most expensive neighborhoods that are installed on the laptop.
  But unfortunately, I do not know what will cost repletion.
  This information you won't get form the Toshiba service partner in your country.
  I recommend you ask the service partner.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• Behavior strange screen/video Satellite Pro P100-109

  I have a strange problem with my Satellite Pro (P100-109 model pspa3e 00n009du). I edge video card printing is letting me down, so if anyone has a solution so please help!

  Yesterday, while working properly since I bought the machine, I had a strange video behavior. Black icon arround windows not updated correctly etc.
  After a restart of the system, these problems seemed resolved, but it lasted just a view minutes.
  After awhile, I got a blue screen (BCCode: ea BCP1...) BCP4:00000001 SP: 2.0) learned Internet research that his had to do with the video driver.

  Symptoms of the display:
  -Vertical dotted lines shown on the screen of the bios toshiba (variety of colors)
  -Loading of Windows show a few vertical lines as well
  -After loading the clickable elements appear black (not titles of window - no buttons shown/rendering)
  -L' screen goes black every 4 seconds
  -System responds very slowly, but sometimes it seems that it works normally
  -mouse disappears
  -After awhile that I get a black screen, system does not answer more.
  -In windows safe mode (so do not using the nvidia drivers), the display seems to work normally

  DID the next trying to solve my problem in vain:

  -J' I uninstalled/removed the nvidia drivers and installed the last on the toshiba site.
  -Deletion of original and installed drivers drivers Guru3D site (also used the Driverutility from the same site).
  -J' I uninstalled/removed the nvidia drivers and installed the original
  -Upgrade to SP3

  Uninstalling the driver (in safe mode) and so to use a generic driver only seem to work.

  Anyone know how this can be resolved or are these signs that the nVidia GeForce Go 7900 has been roasted.

  Hello

  Long story. short answer...

  It is really possible that your GPU chip malfunctions.

  I came to this conclusion because the laptop don t symptoms occur if the graphics driver is not installed.
  If the graphics card driver is installed the graphics card would go with the best performance and possibly graph questions would appear once again.

  I think that you can't do anything to what might solve this problem outside to contact the ASP in your country and ask for help.

  Good luck

• Matte, non-reflecting screen on Satellite Pro A120

  Hi, I'm about to buy
  Toshiba Satellite Pro A120 Core Duo 1.66 GHz 512MB 40GB COMBO XP
  quicklinx: 454PPN
  Manufacturer part: PSAC1E-03X00YEN

  But have a question. This laptop has display Crystal Bright/True Brite etc.?
  I prefer laptops with screens "masts", non-reflets.

  If this one has 'mirror' screen, could you tell me, who do not have?
  I am interested in laptops with Core Duo and 512 MB of RAM (propably series A or L).

  Thanks in advace...

  Chris

  Hello

  According to all specifications of this notebook doesn't TruBrite display. By the way for this laptop is "money supply". Not bad!!!

  I read somewhere that Satellite A120 has the same construction as Tecra A8 and it must have really good unit interpreted.

  In any case you can check under http://www.buytoshiba.co.uk/Toshiba_Satellite_Pro_A120_PSAC1E-03X00YEN/version.asp

  Good bye

• How can I fix the screen on Satellite Pro L300?

  How can I fix my screen Satellite Pro L300? I went by mistake about it.
  Although there seems to be nothing wrong with the external armor but there seems to be a few lines on the screen.

  The glass is cracked? You see the flow of liquid crystals when you move the screen?

  If the lines are perfectly horizontal or vertical, and then the glass behind the protective plastic surface is cracked, requiring a replacement LCD.

  An authorized service provider can give you a new LCD Module. Visit the Web from Toshiba for a list of the ASP

• How to activate the resolutions of wide screen on Satellite Pro A10

  Hello

  I looked through various positions through the forums, but have not found how to activate the wide screen on a Toshiba Satellite Pro A10 resolutions.
  The 2 following wires offer partial answers:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  The solution in the 2nd post won't work because the A10 has an Intel graphics card, not a Nvidia. He suggested also, modify the INF of the graphics driver, but to extract the driver (SA10B2DP.exe) file includes an installer, but no INF.

  Just look to see if anyone has any advice on how to activate the resolutions such as 1440 x 900 or 1680 x 1050.

  Thank you

  Hello

  you mean on the external screen, Don t you? If you have an intel chipset graphic why Don t you download the drivers from the website of intel.
  Maybe it offers a resolution of the external display.

  I don't know if the res external can be set to widescreen on this chipset as the drivers are somewhat limited...
  Can you describe what monitor you have and how you connect it to your machine. (d-sub or DVI)?

  Would appreciate some reactions :)

  Welcome them

• Screen LCD Satellite pro M10 max resolution.

  Hi, sorry for my bad English, my question is:
  Satellite pro M10 laptop internal LCD max resolution is 1024 x 768? excluded you superior resolution with scrolling?

  I read in the specific techniques of my laptop max internal resolution is 1280 x 1024 is not really?

  Thank you

  Hello

  As far as I know that the display resolution depends on a view controller
  I found this information in the user manual. The following models are available:

  -14.1 XGA with 1024 x 768
  -15.0 XGA with 1024 x 768
  -15.0 SXGA + 1400 x 1050
  -15,0 UXGA with 1600 x 1200

  I think that in this case, your device has a 14.1 or a 15.0 XGA display controller. Well well, in my opinion it s all right with your laptop. Enjoy it :)

  Good bye

• Error blue screen on Satellite Pro A10

  Hello

  I try to help my in-laws with their SPA10 Pro Satellite. I had set this up for them a few months ago and it was working fine.
  Now it reboots about two seconds after the "use last good configuration ' screen etc, gets to the screen again then restarts immediately to infinity, never a break on error message for long enough to see what he says.
  I managed to boot from the Windows XP home and got disc with respect to the repair or continue with the installation screen. When I asked the computer don't either TI stuck on blue screen almost immediately. The error message is
  STOP: 0X000000C5 (0X00000002, 0X00000001, 0X00000000, 0X8082B98B)

  This is beyond my skill level, someone can help?
  Thank you

  Hello

  It is not easy to tell what the problem is here and what your in-laws have made with this device. Try to start the machine in safe mode by pressing F8 at the beginning upward. What unit starts check a bit if some strange software is installed.

  If there is no important data, I advise you to install the new OS. On this way, you will be sure that it is not because of software. If the problem persists then is the question is more complicated and there may be a hardware failure.

  At the moment I can't tell you more. Try to make the clean OS install and post again on the results.