White y410p screen

Similar Questions

• Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb?

  Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb? He did NOT finish the task is content to any screen blue screen saying it's bad it's bad, your computer is messed up bigtime, so-to-speak

  Hi Cynthia,.

  1 have you ever done any hardware or software changes to the PC?

  2. What is the brand and model of the PC?

  3. What is the full error you get when you try to evaluate the computer?

  Audit of the statues of the device in the Device Manager.
  a. click the Start button, type devmgmt.msc and press ENTER.
  b. check for any exclaimation mark and the status of the devices.

  Follow these methods.

  I suggest you to first run the resolution of performance problems.

  Method 1: Open the resolution of Performance problems
  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  Method 2: Disconnect non-essential external devices and try to evaluate the computer.

  Method 3:  Also, temporarily disable the antivirus and check the question.  Anti-virus programs are sometimes called causes this problem.

  Turn off the Antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you.

• Why can't I save my corrections? I just get a white 'save' screen.

  Can someone tell me why when I try to save my corrections to all a document, I get is a white "Save" screen?

  Hi sandy0864 ,

  Please check with this step: -.

  Acrobat > edit > Preferences > General > under basic tools, check out the options for 'Storage Show online when you save files' & 'online Show of storage when opening files. OK, then relaunch the Application.

  I would like to know if it works.

  Kind regards

  Christian

• CC white Application screen

  Hello world

  I try to install the creative cloud application for my office. The problem is, whenever I open the application, I get a white screen. Anyone know how to fix this?

  Thank you, Jas

  Windows 7

  64 bit

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• A white blank screen as they were returning to the page of the site server page.

  I'm trying to manage my site webapp hosted on Intext Cloud FX. The scenario that I face is the following

  1. I submit to the payment server servlet https://abc.com/paymentcall page.
  2. the server responds with an interim page (form with hidden fields), with a form by submitting parameters to the url of my Web site

     (http://a.com/checkout/paySuccess.mobile).
  

  My application is hit in the second stage when the server responds with an intermediate page and it shows a blank white screen.

  Any help in this regard will be helpful.

  Concerning

  Found the solution. Problem is that I tried to submit the form to the encrypted page (https) page (http) unencrypted. On the firefox browser, we get an alert message about this but on hosted application, no such message only made its appearance and comes only from the white screen. When submitted to encrypted (https) page everything has worked.

• iMac 24 "(2006) begins with Pink/White pixelated screen"

  Hi, my iMac 24 "2006 frozen while watching a YouTube video. Its done but the video froze. Had to force a shutdown. Handed on to a screen to Pink/White pixelated patterns. It starts, Apple logo, spinning wheel, then a blip, but just a pixelated pink and white screen blank. He went 3 - 4 (screen pixelated) Apple hardware test, 4 passes a Memtest, I got in Single User Mode (screen black green pixelated), Verbose Mode (screen pixelated), Disk Mode target (no problems in this mode) and Boot Mode target (no problems in this mode) with an another iMac. Fix problems with the HARD drive and also repaired permissions. All my files are intact and my OS x (Snow Leopard) seems well intact. It won't start any disk inserted in the drive Superdrive. I can eject the disc with a re - start to hold the eject button on the keyboard or the mouse. I get the startup chime, no beeps, no codes and only get the kernel panic when I try to boot from a CD/DVD disc. Do NVRAM/PRAM rested and reset the SMC have swapped the RAM with new RAM without result. It shows a ZERO GPU issues or fail before that. But he began to act more slow when t switched to firefox as my browser. With only 3 GB of Ram, not surprising. Other odd and random questions like losing all my personal settings one night a week earlier, as well as all my applications at rest again. As when I opened iTunes I got the Welcome screen and start again with iTunes. My files were intact, but even some of my emails had to be searched and imported again. Things like this. I thought of something was about to give... and it was probably the case. I'd hoped to Ram instead of the GPU problem. I do not suspect the GPU at the moment, even if many tell me that it's probably the GPU.  The only thing I found was under "Graphics" bad Apple hardware test it reads 'Unknown Video' in the profile section. No other beeps, errors, codes, etc. other than the screen pixelated and don't pretend to begin the OSX. I know it's 10 years old, obsolete, etc... but he has run nearly impeccable and had a very easy life so far.  My next step is to try an external monitor and see what happens. I need to find and get the right adapter for this first. It's a bit frustrating that I read some say HDD, another RAM, many GPU, some the OSX... but it has passed all Tests of material thin Apple. No error codes, beeps, blinking, nothing. Any other ideas? Thank you.

  DWD

  To connect an external monitor to this iMac, you'll need a Mini DVI to... Adapter (DVI, VGA, or HDMI) .

  See > https://www.google.com/search?q=mini+dvi+adapters

• White freeze screen Equium

  My friend and I have the same laptop computer satellite and the same problem whenever it starts.
  In a few minutes the screen goes all white and I need to bring up the Task Manager and close Internet Explorer (3 - 4 times) to close.
  This happens every time after startup, even on two laptops.

  Any ideas how to solve this problem?

  Hello

  Have you tried to view the driver update?
  Do this!

  It seems that this only occurs using IE.
  As for the use of other internet browsers?
  Maybe try firefox IE freezes and crashes, and this could be the reason for this white screen problem.

• Tecra 8100: solid white vertical & screen turns off

  Hello

  My Tecra 8100 has (or had) which seems to be a 'known fault': screen off, can be returned by pressing fn + f5 or the small metal button.
  He also acquired a solid vertical white line about 1 mm wide and 30mm from the left edge. I managed to stop the problem of (backlight?) deletion of frame (thanks to those who responded to my previous, now locked, question!) by taking the cover off the screen and by disconnecting and reconnecting the ups. So now the screen always remains on. Unfortunately the white line is still there, and then that previously, the screen was normal except for the line, all right (i.e. all except 1 "of the screen) is now just multicolored stripes.

  What do you think? I have been informed that the inverter is no power the backlight, which suggests that the problem of lines is something else. But they occurred at the same time. In addition, as far as I remember, when I was playing the connecting the inverter lines came and went (and then came and remained). Would it still a bad inverter connection? Or a broken inverter? Or more likely to be something else?

  see you soon,
  George

  Hello

  There must certainly be a hardware problem. You should contact the service
  Please check your other display:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8201&MessageID=28323#28323

• Satellite L675-S7040 - white flash screen

  It is an interesting problem. The computer is not yet a year old. Once occasionally (about every 3 hours) the computer screen lights up all white. Literally, never a pixel on the screen will be white.

  Please note that the computer is lying perfectly still and the screen is not be pushed or pulled in both directions. I think it's either a graphics driver related issue or possibly related material.

  Any input on this matter would be greatly appreciated. Thank you.

  Hi ccdwiu,

  Do you see the same behavior on an external monitor?

  Theoretically, it could also be a problem of display driver, but for the moment I think that it s hardware related problem. In any case, most recent display driver can be downloaded from the Toshiba page :)

• White LCD screen

  I got my laptop about 18 months and now it displays only a white screen with a few darker horizontal tasks.

  This happened after letting me on, only to come back an hour later to a dead lcd screen. The laptop works fine with an external monitor.

  What is the problem with it? Being a student, I can't really afford to replace the screen!

  Hello

  It could be a fault of converter FL or other hardware malfunction. The FL inverter is not very expensive. In this case I recommend to contact the ASP Toshiba because it can do some diagnostic tests.

  Concerning

• HP all-in - One PC 19-2113w 19: white/black screen after upgrading RAM

  Hello

  So I have upgraded RAM using 2 x 4 GB SODIMM DDR3 Corsair 1600 Mhz, after installing the PC boots but screen is white/black

  steps to follow:

  1. I tried with 1 socket by using only a RAM, screen black

  2. I tried with 2 socket using RAM only one with the same RAM step 1, screen black

  3. I tried step 1 and 2 using the other RAM, screen black

  now here it gets interesting

  4 tried 1 socket using Original/factory RAM, screen black

  5 tried 2 socket using Original/factory RAM, screen black

  6. tried without any RAM at all, looks like a lack of RAM, screen black

  Now, to each measure adopted, I must say that the screen sound not only not showing things, but its totally black as it does at all, until the system starts normally. !

  Is it Possible the upgrade of RAM affect the screen? or maybe when I was replacing the RAM I hit some conecting by cable to screen or something?

  HP 19 all-in-ONE PC

  Product No.G4B06AA #ABA

  Model n ° 19-2113w

  10 64-bit Windows

  Update

  Removed the battery and hold the power for 30 sec button (BIOS reset if I'm not mistaken?) now it works with the orginal of RAM so I guess my new RAM that's the problem!

• White boot screen then... Enter keys cmos and BIOS?

  At boot I have a totally white screen until after a minute, and I get Windows Welcome. Everything is fine in the case. I thought it was a default CMOS?  How to see startup messages, and which key that will allow changing the CMOS and BIOS? Tried F10, 2, 6, and same F8'm in safe mode? Hope I don't have to do a full restore? Thank you!

  HP Pavilion P6310F Quad core, Win7 Home Premium 64 Bit, with 6 GB of RAM

  I suspect that this is perhaps the monitor instead of the computer.  Try to turn on the monitor with more than a warm-up before time then turn on the computer.

• White projection screen media player

  Hello.. don't know what to do. I reinstalled the latest version of media player a few times and can't get it to show my video clips. There are sounds, but no pic. All I get is a white screen. A running Dxdiag.exe and shows no problem.

  Help

  Pat

  Hello

  1. what version of Windows Media Player is installed on your computer?
  2 is this problem limited to only video files?
  3. What is the file format of the video files?

  Method 1.
  I would ask you to update the Codecs for Windows Media Player and check.

  Player Windows Media for Windows XP supported Codecs
  http://support.Microsoft.com/kb/291948
   
  Package of Installation of codec
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  Method 2.
  You can also update the drivers of graphics from the manufacturer's Web site and check. Another possibility is that someone else is at the origin of the conflict.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• Vertical bars, thin, white full screen of WMP11

  With the help of Dell Dimension 4700, 3 GB RAM, EVGA GeForce 8400 GS with 512 MB, Windows XP SP3, SoundSpectrum G-Force 3.9.4.

  When I open WMP11, then select show improvements, then close show improvements, then go to the mode full screen... There's a mess of thin, white vertical bars.  This is equivalent to any visualization I select, or if no view is selected.

  No matter what I do - short of closing and reopening of WMP - him reappear the white vertical bars in mode full-screen.

  Is this a known problem with WMP11?  No matter what known fix?  I searched 'vertical bars' in music and its Forum and found nothing.  Thank you very much!

  I had the same problem, and before that I played with it too much I did research. These messages have helped me do a bit of that research. I also think that it may be useful to mention that I have a Radeon 5700 series, I use my TV 32 inches as my screen via the HDMI connection available on the vid card. Levels at 1600 x 900 is enabled. I am a COMPUTER professional and nothing of what I read seemed logical as to the root causes of this issue. I use this workstation for all and everything under the Sun, audio recording and mixing, capture video and administration of editing systems, encoding, gaming, etc. Basically, I make the most of my very competent and versatile Windows operating system. Sometimes, the simplest thing is the answer. In my case, it seemed that this was the case. I can't say I've done work for everyone, but it worked for me. That said, here's what I did to fix the problem. (I did all that, although not in full screen, still playing album The Roots Things Fall Apart I was listening too when I arrived in this issue)

  1. I disabled the visualization.
  2. I have a right-click on the screen and selected More Options...
  3. Click the Plug-ins tab. You should see the list of categories on the left and the right corresponding sub categories list.
  4. My category of visualization has been selected by default. On the right will be the list of visualizations that you have installed. (I have only the defaultAlchemy,Bars and wavesandbattery installed) When you have a view selected, you should see a section in this same window just below the list of categories.
  5. It should be a Properties button available when a specific view is selected.
  6. I tried to use properties for all the visualizations except battery and I got a message that says that this plug-in does has no properties that you can set.
  7. When I went into the properties of the battery there are 2 settings I could adjust. Screen size under full screen settings and the off-screen buffer size under Player settings.
  8. Only, I've adjusted setting the screen size to match my resolution (1600 x 900). I did adjust the other settings.
  9. I clicked OK to close this window. I clicked on apply and thenOK in the window main options.
  10. I activated the visualization of my preference. (Battery is being my favorite)
  11. I went full-screen, and the white bars. Visualization worked perfectly.
  12. I tried the other visualizations and got the same result with each of them.

  Hope that this clear and the most important is useful.

  http://www.Speedtest.net/result/888894683.PNG

  http://www.Pingtest.net/result/20846112.PNG

• White scrambled screen and now it won't turn on or off

  I was watching a movie on Netflix and all of a sudden the screen kept jostle. I stopped it and now when I restart my laptop all the getting is a fuzzy white screen. I restarted again and now I can't always help and it is not closed, unless I have hold button power for a few seconds. Please help, I need my laptop for college assignments.

  Contact HP.