Who can copy and send me Qosmio G30 - 117 Recovery DVD

I don't have a recovery DVD. My friend buy it for myself in England and bring it to me. Not found the recovery DVDs in the pack. I asked the seller, but they were not interested in my problem. I asked Toshiba service in Turkey, but they told me that they could not give or sell me a new recovery DVDs. I have the key to license windows xp mce. How can I solve this problem. Could someone send me a copy of the DVD of the G30 recovery?, could someone help me?

Hello

As far as I know the device must be supplied with recovery CD or DVD player and Qosmio recovery media. If you n t have these media, so you should contact Toshiba service in the country where you bought the laptop.
Check this box:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

Tags: Toshiba

Similar Questions

  • Display and boot on Qosmio G30-117 problems

    Hello

    My Qosmio G30 (117) has problems to start. Basically the Qosmio title displays properly, but as soon as Windows XP appears, it is as a grid of white dots on the screen. He will then drain and take forever to get into windows. The grid of points remains all the time.

    My hypothesis is that sound my display driver, but get an update is a challenge. When I try to download from the page drivers it says that there is none. The search is based on the model of my PC, it should be no wizard

    I can't get into XP in safe mode.

    Real question is, is this my driver or is this a hardware problem?

    Thanks for your help,
    Peter

    Hi guy,

    that looks a little a hardware problem but before we get into it, you should download www.laptopvideo2go.com drivers (Please read the FAQS on this site!) and then, if the problem persists after installing new drivers, you must contact a local authorized toshiba service.

    I give you a link if you really want to contact an ASP (Authorized Service Partner):

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good luck buddy and good weekend

  • Qosmio G30-117: HD DVD support?

    I bought the qosmio G30-117. It plays HD DVD discs? If this isn't the case, I can play HD DVDs doing the firmware update?

    Post edited by: dr.amon

    Hi Amon

    As far I know a few models of G30 will be able to play HD only on some models. I found the info that some units with HDMI port and HD DVD player will have this opportunity.

    Sorry, but I have not found more information.

  • Qosmio G30-117 - no HDMI plug - so, how can I connect to my new TV HDMI

    Hello
    I've had this laptop for about a year and for a large part of which I had no idea what was HDMI. Then my old TV died and I had to get a new one. In order to have my Qosmio I assumed (stupidly) - after all, it is a (relatively) new piece of equipment and has the HDDVD. I bought the new TV, got the cables and low and this is where should be the connection HDMI was nothing.

    There is another connection that I thought was HDMI but isn't. I am able to connect to the TV using my d-connection cable SCART. But of course how a true HD signal. I can't seem to find out and a call to the support of Tosh line me anywhere we know?

    Y at - he had a special adapter/cable which can connect in this regard ' HDMI? If this is not the case, how can I can a HDMI Signal on my TV from the phone.

    Any help or ideas appreciated

    Thank you
    Peter

    Hello

    The Qosmio G30-117 model was not delivered with the HD-DVD drive, but only with the player double layer DVD Super-Multi drive (+ R) and so this laptop does not support HDMI port but only digital device on the port (d-connector).
    The other G30 with HD-DVD has been bundled with HDMI port.

    A component-D to HDMI adapter is unknown to me. But why you want to connect the HDMI laptop if the laptop does not support HD-DVD player?

  • How can I activate images on the DVD in video file so that I can edit and send to people?

    Hello.  I recently transferred footage tape VCR to a gathering on a DVD of family.  How can I activate images on the DVD in video file so that I can edit and send to people?

    Any help would be appreciated, as I was chasing my tail for about an hour and a half now.

    Thank you!

    When you insert the DVD in your DVD player... close
    all the windows that can open and then go to... Start /.
    Computer... right click the icon for the DVD player
    is in, and then select or open Explorer.

    The files you need from the DVD are the. VOB files.
    You will find them in the VIDEO_TS folder. Copy them
    in a folder on your hard drive. Or you can copy the
    full VIDEO_TS folder.

    First... just try to rename one of the. VOB files to
    . MPG or. AVI and see if it will matter in Movie Maker.
    If import works... drag the file to the timeline and
    Economy/publication it to .wmv or .avi format. Then...
    Re - import new video film for editing purposes.
    (if you have Vista Home Premium or Ultimate, you)
    may be able to import the VOB files in Movie Maker
    as they are)

    (FWIW... you can probably play the files renamed
    in Windows Media Player to be sure that VOB
    file to edit)

    If you are unable to import the files they need to be converted
    another .wmv format would be a good choice.

    There are many programs that can do conversions...
    The following freeware is an example...:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup260.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)

    First, you will need to decompress the file or just open the
    Drag FFSetup260.exe out of the folder
    and drop it on your desktop. To install left click.

    Next, after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your video clips on the main screen...

    Select "all to WMV" / OK...

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck...

  • Mine is Yahoo where POP is used. Tuberculosis is IMAP. I can receive and send emails, but when doing action on tuberculosis (Del or send) any reflection on the primary server

    Hello
    My e-mail address is Yahoo and Yahoo by default user POPs.
    I understood from your help file synchronization is only compatible with the IMAP e-mail provider
    I can receive and send emails from TB, but during action on tuberculosis (Del or send) any reflection on the primary server, even when doing the action on the main server (Del or send), no change on tuberculosis

    help from yahoo I managed to find the Setup for IMAP, but could not apply them on TB, TB already have Yahoo as POP in the configuration list
    Please your help on this

    Best regards
    Mohamad

    You cannot convert an existing account, but you can set up your Yahoo as IMAP account in parallel to the existing POP account. See
    http://KB.mozillazine.org/Convert_a_POP_account_to_a_IMAP_account

  • Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

    Why Outlook in Windows 7 keep ask my network password every time I open the program and repeatedly asking the password. I can receive and send mail without problems

    See this for help...

    http://support.Microsoft.com/default.aspx/KB/290684 MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

  • I want to unsubscribe and no response on the phone or the paguina can cancel and send it to me at an another paguina where did not help me at all, how can I unsubscribe?

    I want to unsubscribe and no response on the phone or the paguina can cancel and send it to me at an another paguina where did not help me at all, how can I unsubscribe?

    Hello

    Please contact support by calling/chat for cancellation requests and billing queries:

    Contact the customer service

    * Be sure to stay connected with your Adobe ID before accessing the link above *.

    You can also check the help below document:

    https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

    Please go through the Adobe - General conditions of subscription as well.

  • Qosmio G30-163: HD-DVD player will not recognize the Matrix Trilogy

    It is the last issue. WinDVD HD crashes after playing the opening for Blood Diamond and The Island WB logo. I posted a message about it, but it disappeared.

    Anyone know when the last update is due? He has not been one since December 26.

    Thks

    This post initially you're talking about? :
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=95884#95884

    I have checked the European driver of Toshiba page and chose the Qosmio G30 PGQ31E series and found the update to the most recent Firmware for HD DVD-R + r DL DRIVE (SD-L902A) and for the readers of disc-DVD-HD TS - L802A.
    There are two different firmware updates.

    In addition, I would recommend looking for an update of the HD DVD player. It of necessary.

    Toshiab HD DVD player update was published on the Toshiab driver page. Update!

  • Need help with my Toshiba remote control and receiver for Qosmio G30 161

    Hi all

    I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

    I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

    Also to confirm that I'm under addition of Windows XP MCE.

    Anthony Worlock

    Hello

    This remote will work, if you use it without any special drivers and special software, only in the Media Center.

    But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

    Please try this tool and check if it works.

    By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

    Welcome them

  • Graphic problem and reset on Qosmio G30

    Hello

    My Qosmio G30 collapsed.

    It started with the screen do stripes of color everywhere, and it came and went over time.
    Sometimes the screeen had completely black, while the computer is still working proparly.
    I know then that in videomeeting I could still continue with the participants when the screen went black.
    The noise was still there.

    After that the graphics stoped to work anywhere and I thought I had some kind of virus. When testing for reset the computer with the reset product CD I can't finish rebooting. The computer formatted the hard drive, but no new operating system has been installed, so I'm in big trouble :(

    The GPU (what is it?  :() seems to have a link of the week in the G30 judging by other discussions in this forum.

    Anyone has an idea on how I could solve this problem?

    Best regards / Anders Molin

    Hello

    GPU means that the graphic processing unit-> it's just graphic chip card

    According to you the message chip the graphics card may be defective.
    If you are not able to restore the laptop using the Toshiba Recovery then CD I would recommend contact the ASP in your country for assistance.

    In the worst case (GPU is a shame), the motherboard should be replaced.

    Good luck

  • I can't copy and paste from Word to the Internet (Firefox or Chrome), but I can copy and paste from the Internet to Word

    I can't suddenly to copy and paste text from Word to the internet (Firefox or Chrome, other Web sites or e-mail), but I can do the opposite. Any ideas? Copy paste works between Word documents and it works between websites (for example, e-mail web page), but not the word to the internet. Help, please. I need to copy and paste my CV to apply for jobs online.

    Great answer. You just saved my HP to learn to go through walls.

  • Where do I fins 'tools' so that I can copy and paste?

    I have Windows 7 and I just downloaded Firefox as my default browser. I can't find the 'tools' for copy and paste. I'm on Facebook a lot, and I copy and paste articles and messages all the time. But I can't find the 'tools' to copy and paste on the topic of Firefox at the top of the page. Where is the copy and paste located?

    You can use Windows shortcuts:

    • CTRL + c to copy
    • CTRL + v to paste

    And you can use the context menu.

    If you have the menus compact represented by the orange Firefox button, you will notice the Word Edit with some icons next to him.

    If you have the classic menu bar full length, copy and paste are in the Edit menu.

    Finally, you can add icons in the bar if you prefer. You use the personalization feature. To call it that, either:

    • Right click on a zone empty of the tab bar (or the button '+' at the end)
    • Menu view > toolbars > customize

    The icons are not alphabetical, but you should find cut, copy and paste somewhere drag and drop it where you want, and then click done. (If you get tired of them too much space, reopen customize and sauté them.)

    You can find a method that works well for you?

  • I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

    Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

    The anonymous gives path is for Vista not XP.

    The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

    See:
    http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
    Display the hidden files and folders

    In XP, the path is usually:
    C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
    ("xxxxxxxx" is a unique alphanumeric identifier)

    When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

    See: recovery of data from an old profile

    Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

    Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
    (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    (Windows users: do the update manually, very easy.)
    Check your version here: http://www.mozilla.com/en-US/plugincheck/
    See: Java Update
    Do the update with Firefox closed.

    Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
    Check your version here: http://www.mozilla.com/en-US/plugincheck/
    See: Flash update
    -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
    -the release of Firefox (file > exit)
    -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
    -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
    -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • Can copy and scan but not print with my hp deskjet all-in-one 1515

    Hello

    Pls help! I can't print. I can scan and photocopy with my hp deskjet printer 1515 all-in-in-one, but I can't print. I tried to print with my computer laptop windows 7 and was able to print but I can't print using my regular laptop, which is a laptop HP 650 which uses windows 8.1. When I send a document to print is says it is printing and shows in the print queue and then disappears. What can I do? He has not even print a test page but it printed a page of information and the alignment of catrige page.

    Hello

    Please, try the following steps and let me know if that can help you:

    1. In the Control Panel, select uninstall a program and uninstall the driver software base HP Deskjet Ink Advantage publicly traded 1515.
    2. Click the R keys on your keyboard and the Windows Logo appears in the Run dialog box.
    3. Spool type and click OK.
    4. Open the Drivers folder, and then select the x 64 folder if you have a 64-bit OS or the w32x86 if you have a 32 bit OS
      Note: visit http://whatsmyos.com/ to find your type of operating system if necessary.
    5. Open the 3 folder, locate the HPBXPSRENDER. DLL file and rename it to HPBXPSRENDER. OLD
    6. Reinstall the latest version of the HP software:
      http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-117537-4&cc=us&DLC=en&LC=en&OS=4158&product=5385208&sw_lang=

    Shlomi

Maybe you are looking for

  • I'm having problems with an outdated Apple ID

    I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  • Invert the colors OFF makes my iPhone 6 to be inverted color after 9.3.0 iOS updated

    Invert the colors Off makes my iPhone 6 to be inverted color after 9.3.1 iOS updated my iPhone 6 a negative color after updating iOS 9.3.1. I have to turn on Invert color for making my iPhone to work in normal color. Is it a problem in the software u

  • unknown shared device

    When I open the Finder, there is a shared device I don't know: 'hp6cc2... '. ', what is? How can I remove it please?

  • HP Photosmart C4280 all-in-one no scan

    Although my printer works fine for printing and copying, I get error messages when I try to scan by pressing the button or by using the HP software I use the HP Photosmart C4280 all-in-one with a MacBook OSX 10.5.7 running I connect to the printer wi

  • HP laserJet 2300d: flashing light "Attention".

    Hello After my last impression, my "caution" light came and continues to Flash. I remove the lower plate and open and closed as requested above, but its still does not. I do not have a paper jam so I would like someone to help me know what it could b