Why am not asked a password at startup to the top?

Similar Questions

• Portege M400: Why am I not asked a password at startup?

  Hello

  I have a Portege M400 and I used the Toshiba security software help put in place a the BIOS boot password, but also a protection of HARD drive password. This software, as well as the true BIOS (Esc + F1 at startup) show that the password I set is recorded or recognized.

  However, I'm not really asked any of these passwords when I start the computer.

  I have a system to dual-boot with the original WinXP for Tablet PC on one of the partitions and one Feisty Ubuntu on another. My boot loader is GRUB, but I do not understand why this should affect the behavior of the BIOS which should arrive before calling the bootstrapper...

  Can someone help me with this? It would be really important for me to protect my BIOS and the hard drive.

  Thanks in advance,
  dsokus

  1. check your security settings with password for Toshiba utility. Are these these configured correctly?
  2 you have the user or supervisor password? If you only set the supervisor password that you are not prompted for the password.
  3. try to put the HDD and user pw in the initial bios setup (press ESC when prowering on).

• Satellite C50-B-14Z continue to ask for password at startup from the bios

  Hi guys,.

  My Satellite C50-B-14Z no reason started asking for pssword when starting on bios.
  I don't put passwords and I do not know how to reset. If the laptop is now unusable. Could someone help me please?

  I put t know why the phone asks you to enter the password of the BIOS, but the fact is that the BIOS password can be removed ONLY by an authorized service provider.
  I'm afraid, you will need to contact the Toshiba ASP in your country in order to remove the password of BIOS of m.

• HP mini, enter current password at startup to the top

  Hello

  I get the error "Please enter the current password" 3 times on my mini HP 1101.  Then the message "password check failed, fatal error... system halted CNU9412TL2.» Can you please help. Thank you

  Hello

  Try to enter: e9lov37ak7 (3rd character is a lowercase L)

  Kind regards

  DP - K

• My computer is very slow and I was told that I should clear up until my departure and eliminate the number of programs that run at startup to the top.

  My real problem is to know how to clean the programs that are run at startup to the top. In addition, any other suggestions on how to improve the speed of my computer.

  Manage your startup:

  Open your Start menu-> click on run-> in the command screen type "msconfig.exe"-> in the "system configuration utility", click on a 'service' or 'Startup' tab-> uncheck all the programs you are no longer help.

  The fragmentation

  1. Right-click the C drive.
  1. Click on properties.
  1. Click on the Tools tab.
  1. Click "defragment now".
  1. Click on defragment.

  You can search what process you use cpu and the end of the process.

  Under steps:

  1. right click on the taskbar.

  2. click on the Task Manager.

  3. click on the processes tab.

  4. double-click on the CPU.

  5 is if "system idle process" is max.

  6. If it is not a right click and click on end process.

  Learn "why is my computer running so slow?" and "how to speed it UP:

  http://downloadlk.com/WhyIsMyComputerSlow.htm

  Use the tool: http://downloadlk.com/themosteffectiveregistrycleaner.htm

• Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

  I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

  Delete the app first, only then it re-download again.

  If not, try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• by using a standard user account, when it is run as an administrator, system does not ask for password

  • I created a standard account for one of my children. He installed a program that refused him permission to run. I went to "run as administrator" and should be asked for a username and password to allow him to use the program. Instead he gave me the same error message access denied.
  • I then tried to implement other programs on his desk to run as administrator and they opened, but they ask me password. Why not invite me for a username and passoword?
    
    

  But the my administrator account has a password!

  Log in as administrator, and then set a new non-empty password. Now, repeat the test under your son's account.

• Windows 8 will not ask for password on wake up from sleep

  My Dell laptop since the upgrade to windows 8 Windows 7, when I close my lid does not go to sleep, or when I wake to sleep, it does not ask me for a password, everything has been reset to the default values, but I don't know why it doesn't work. someone please help!

  The solution, as someone else has asked this question also and got the correct answer - see http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/password-after-sleep/8ef46143-300e-41e8-aafb-b61782b67145 . There is a new setting of Windows 8 on top normal settings in the power settings.

  Be aware that setting how long time should pass before asking to specify a password is required is a per-user setting, so if you need to change the default value of 15 minutes, it takes to each user created on the system.

  For me, I took me 1 minute rather than always for all users, as it is pleasant, if after an accidental sleep, a user can always resume immediately. But the foregoing I have a password.

• Apple Watch does not ask for password

  In recent days, I discovered something disturbing.  If I take off my Apple Watch and put back on without having to type in the code 4 digit, even after an extra charge per night, it will not ask for a password after an hour or two and works normally.  If it's supposed to happen?  I couldn't find anything in the support forums.

  I got my setup shows to use a password because I got it last December.

  Suzanne

  Hi Suzanne

  If you use the following settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - on.

  -On your iPhone, in the application of Eve, go to: Watch My > password > enabled.

  -Also on screen settings of password - unlock with iPhone turned on.

  Then, after putting on your wrist, your watch will unlock after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• Stor.E Slim 1 TB does not ask for password

  So I put a password on this disc using the supplied software.
  Then I took to use on another PC and it will not ask for a password?

  Do I have to install the software password on all laptops / PC that I use?

  Lock password software is needed to define the password reset / clear the password already set.

  If the HARD drive / data on the disk HARD has been already locked, you should always asked a password in case you want to access the protected data.

• Tecra M2 asks for password on startup

  My Tecra M2 has a slight problem. He keeps asking for a password as soon as I turn it on. It does not bypass the password and I did not

  Post edited by: seqrete

  Hello

  Well, there is nothing to see. I guess the camera asking BIOS password and it of not possible to remove the BIOS password without knowing the old.
  If you n t know the password the only way to remove it is to contact the Toshiba service partner in your country. Only the ASP can remove this password.

• Windows will not ask for password after disconnection and stop

  machine is aspire R13, WIN 10

  I set up a password for OS - on the machine, do not use a windows account. After the outside panel and closure, opening the lid takes me straight on the desktop without having to ask for a password. What is a password, if anyone can open the lid and have access to everything?

  If instead of disconnecting and leaving the computer to sleep, so he asked a password to wake up - as if an unknown person will have access to the computer to wake up from sleep. How stupid!

  Is that the reason for this is that microsoft is forcing me to use a MS account for the connection in order to use my machine?

  From another forum, the solution was simple: change the password. Now, he asks a password after disconnection.

• Update of applications does not ask for password

  Hello

  I put my settings to use one password to update apps on my iPhone 5, but since I have not upgraded to iOS 10 none appearing guest to enter the password when I hit the button to update for any application.

  Please think about if I'm missing all parameters

  Thank you

  I don't think that a password has already had to update the app store applications that are already installed on your device. Just enter a password when you download an app for the first time.

• HP Vision 2000: "enter the password administrator or power on password' pop up immediately at startup to the top

  I get 'administrator or power on password password' jump to the top of the screen immediately on startup, the password is lost, and when I'm entered in what I thought the password could be 3 times I had this code - 54667991

  Help, please

  Steps to follow:
  1. use the posted above unlock code to access the BIOS
  2 disable all passwords that are enabled
  3. If the request for current password - enter the unlock code
  4. for the new password, simply press the ENTER key
  5. repeat the same thing to check the password column.
  6. then exit the BIOS saving & output option to save the changes.
  
  Troubleshooting:
  Incase if the password does not work please try a Hard Reset as follows.
  
  1. power off the laptop
  
  2 disconnect the power adapter and remove the battery
  
  3 hold the Power button for 30 seconds
  
  4. connect the power supply/AC adapter (leave the battery at the moment) and start Notepad
  
  5. If now see you a password, please enter the same password I've shared before and press on enter
  
  Hope this helps, for other queries in response to the post and feel free to join us again
  
  * Click on 'white Thumbs Up' on the left to say thank you *.
  
  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
  
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Hello, I got a CS5.5 for Windows Upgrade Version and changed to a Mac. Now I need the Mac Version. I tried to install Adobe download. Unfortunately, it does not accept my password. I guess the cause of the Upgrade Version or the Version of Windows I o

  Hello, I got a CS5.5 for Windows Upgrade Version and changed to a Mac. Now I need the Mac Version. I tried to install Adobe download. Unfortunately, it does not accept my password. I guess that the cause of the Upgrade Version or the Windows Version I own. My system: Mac OS X 10.6.8 2.8 GHz. thanks for the replies! Greetings, Eva

  Here's a link to info on swaps of the platform.

  Product order | Platform, language Exchange

  If you want to try to contact Adobe support to try to get an exception, Start here after selecting the relevant answers, choose "still need help? Contact us. "and the option to contact (or phone) CAT.