Why any program bit 32(X86) does not install the specific dirctory in the registry?

Similar Questions

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• LabVIEW 2014 app installer doesn't create files % 2Ffiles in the documents and does not create the registry entries at least as administrator

  the LabVIEW 2014 32 bit app installer doesn't create folders/files in personal documents folder and does not create the registry entries in hkey_current_user\software except as an administrator.

  It's a true statement.

  You must change the windows policies, user restrictions (not recommended), normally the register (write) access is limited to normal users.

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.

• Complited download but it does not install the software

  

  Download complete but do not install the software.

  Hi juan,

  Double-click the downloaded file to start the installation.

  By default, your product trial installer should start automatically when the download process and extraction is complete. If installation does not start automatically, navigate to the folder where you saved the downloaded trial software and launch the installer. (See where are my downloaded products?)

  Kind regards

  Rave

• Comments Windows 7 does not install the network driver?

  Hello.

  I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!

  I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:

  http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/b5843189-d519-4e8a-a4f8-f1e671b341b6.

  I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet.  I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?

  Each virtual machine can be started by double-clicking its vmx file.

  It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.

  You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.

  You can add line at the end of this file - make sure you just you have twice the same line

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• does not install the new update for iTunes for windows 7 (64-bit)

  I have windows 7 on a 64-bit computer. I have installed, uninstalled and reinstalled iTunes more and more and more nothing helps. I get the same message every time... The Apple Mobile Device service does not start and displays error 1053 and an error 7 (windows 193).  Windows has been updated. I worked on it for 2 days! So frustrating! Ready to give up on Apple and Windows all together. I also fixed the registry, did a clean boot, and yet, I'm having a problem... Help!

  Hi all

  After uninstalling and cleaning everything about Apple, I installed this version (Special?):

  http://support.Apple.com/kb/DL1784?viewlocale=en_US&locale=en_US

  And it works on my Win 7 HP 64 - bit!

  Good luck!

• New installation of Windows 7 Professional 64 bit does not install the Windows updates

  I tried it twice.  I install Windows 7 Professional 64 - bit on a ThinkPad T61.  After installation and activation successful Windows, I tried Windows updates.  The 'check updates' never ends.  After the first installation of Windows, I tried all sorts of bugs found either here or other Windows Help Web sites, does not.  So I reinstalled Windows, but with the same result.

  After that the first installation was impossible to install updates, I received the Windows Update stand-alone Installer and downloaded the stand-alone files for updates.  Would install things like IE updates, but no security update would install, as well as most other updates.  Yet once, just standalone Setup would continue to search for already installed updates without ever ending.

  Does anyone have an idea how to solve this problem?

  Thanks for the comments.  It's good to hear that you have actually solved the problem.

• generic installation program does not install the file oracle_common (or opatch)

  Using the generic installation program (weblogic 10.3.6), there is an error directly dialog box after email / security that says unable to connect - record and request URL of the proxy and port.  even with the proxy information in, do not access.  bypassing this translates the installation is without the oracle_common folder, so I can not install oracle adf via opatch.

  Has anyone seen cela or have information?  I use oracle linux 6.5

  Hello

  Oracle_common directory not created with the stand-alone installation of weblogic.

  It comes only with no facilities Fusion middleware product (for example, SOA, forms, IDM... etc)

  ADF is not installed via Opatch. It is installled via the YES program.

  One stop fixes are installed via opatch.

  Thank you

  Sharmela

• Firefox does not install the Adobe Flash plugin

  Videos flash and flash Web sites no longer work in my Firefox browser. After you install the plugin and restarting the browser flash still does not work or even appear in the list of installed plugins. As far as I can tell that this is not a problem with Adobe Flash that I can still use it with Google Chrome.

  FYI - IE, Firefox and Chrome use different versions of the player in order to work in 1 browser Flash means nothing to the others.

  I would download the installer, close Firefox, uninstall Flash (from programs and features), restart the computer and try the installation program.

• Does not install the audio driver for Portege M400 WinXP

  Hi all

  I have a Portege M400 (3G) and I managed to extract the Windows XP Tablet Edidtion the recovery DVDs. I installed Windows XP and all the drivers in the correct order (I've omitted some of the software I don't need) and everyting works fine (in fact, I am posting this from the tablet itself) except for the sound driver. He refused to istall and gives an error message that the software does not apply to this model; even if it is the only available page driver drivers Portege M400(3G).

  any ideas?

  Hello

  where to download the driver? On the European site? Maybe you should try the Canadian site, they sometimes have some drivers who hasn´t europe and maybe you can find the audio driver that matches:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Otherwise, there is another option: find out which audio chipset is installed, visit the website of manufacturers of this chipset and download the drivers. Him to work.

  Welcome them

• VISTA does not install the files downloaded from the Internet

  Howdy!

  I am newly working on a VISTA machine at work (little church, I am the new pastor and clearly the most tech-savvy person around). When trying to install a few useful programs, I met a problem: I have download the installation files and try to run them, but nothing is really happening. I get the "Open file - security warning" screen, and I click on 'Allow' or 'Run' or something. Then nothing. If I go in the Manager of tasks, I find the executed program, ostensibly at the bottom of the list using 100 K of memory, but the installers never open and nothing never progresses beyond this point.

  I'm running on the Administrator profile, and I even tried clicking on "Run as Administrator". Nothing helps. Any help would be greatly appreciated.

  Thank you!

  Hello

  • What type of program you are trying to run?

  You can view these methods:

  Method 1:

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Turn off UAC and check if the problem persists.

  1. open Control Panel.
  2. under the user account and family settings click on the "add user account / remove."
  3. click on one of the user accounts, for example, you can use the guest account.
  4. in the user account, click on the link "go to the main page of the user account.
  5. under "Make changes to your user account", click on the link "change security settings".
  6. in him "turn User Account Control (UAC) to make your computer more secure" click to deselect the "use User Account Control (UAC) to help protect your computer. Click the Ok button.
  7. you will be asked to restart your computer. Do when you're ready.

  Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

• Windows Update does not install the updates from 14/04/2009. Error code 80070002.

  I'm running 32-bit Windows Vista Home Premium on a Dell Dimension E520 PC desktop with processor Pentium dual core and 3 GB of RAM.
  Reasonably up-to-date hardware. Well protected and all software security entirely to so far.
  My problem that goes from Windows Update is not install updates from 14/04/2009 and returns the error Code 80070002.
  I followed the advice and went in the Windows Software Distribution folder and remove all the contents of the data store and records downloads and tried again about thirty times now.
  I get regarding the acceptance of the license agreement and clicking on, ok, when Vista dims the screen and asks if I started it and then the error message in Windows Update, saying: "some updates were not installed."
  Is not a computer expert, I guess that what is described in help Windows Update error Code 80070002 is the same as 0 x 80070002 for which I found advice on a Microsoft page to save these commands
  net stop wuauserv
  CD %systemroot%\SoftwareDistribution
  Ren Download.old download
  net start wuauserv
  as a windows batch file and run as administrator.
  I now have a download folder and Download.old folder. Fascinating but no help at all!
  I infer that the numbers of 0x0 are my six error codes failed attempts to install Vista Service Pack 1, a few months ago who always ended up with an unusable computer suspended with a black screen and the white writing showing 46 thousand of 96 thousand file and something, followed by a number of 0x0.
  The only way I could get of these attempts was by booting from the Installation of Vista disk, masking the Service Pack 1 update and using the system restore, but that's another story.
  Have an impact on my current problem, I wonder?
  For absolute clarity are the updates that won't install:
  Explores update for Internet Explore 7 edition (KB963027) 14/04/2009 (Just editing that.) Typed a wrong number in a first time. Sorry).
  Four updates of security for Windows Vista (KB952004) (KB956572) (KB959426) (KB960803)
  Windows Malicious Software Removal Tool - April (KB890830). (I downloaded it manually and run it from my office and we found no problem).
  Update of security for Microsoft Office System 2007 (KB960003)
  Update of security for Microsoft Office Excel 2007 (KB959997).
  I'm at a loss what to try next.
  FYI, I use Uni-bleu Power Suite 2009, McAfee Total Protection and Ad-Aware Anniversary Edition with Ad-Watch Live on.
  I tried to do everything that it with Ad-Aware died, but my hunch is that the problem is in Vista ot the updates themselves.
  I'm quite competent with guests of orders, not to mention manually editing the registry!
  However, any help would be received with gratitude and I guess that if the instructions are evidence of fool I have very carefully follow step by step.

  I have the same symptoms: from a distinct point in time updates of windows works more and every time returned the error code 80070002.
  After a few hours, I found the solution: sfc/scannow reported the wuauclt.exe file.
  And the reason was: McAfee virusscan put this file in quarantine. He is falsely W32/Generic.worm.aa in there.
  Restore this file from the GUI of McAfee completely solved this problem.

• Automatic update does not install the update of security for Windows XP (KB2419632)

  KB2419632 will not install on my computer.  I tried to install it several times without success.  I get a 'General failure to install' error without characteristics.

  I downloaded the update (WindowsXP-KB2419632 - x 86 - ENU.exe) and tried to install it manually, but it fails when he tries to save the file "" MSADO15. "." DLL"in the folder"C:\Program Files\Common Files\System\ADO".

  The dialog box that opens is "Copy error" and said "Setup cannot copy the file msado15.dll.  Ensure that the location specified below is correct, or change it and insert 'Windows XP Sytem Files' in the drive you specify. »

  The file MSADO15. DLL exists in the directory above.

  In reviewing other positions, he requested information on the following security software:
  1 security Suite: McAfee Total Protection 2010 (current subscription)
  2. what McAfee, Norton never
  3. preliminary: do not remember, have always used McAfee.

  NOTE: I've never had a problem with an update of Windows until one.

  How should I proceed?

  See the section "How to get help" of http://support.microsoft.com/kb/2419632

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Computer does not start, the registry is damaged. What should I do?

  Original title: I have a computer gateway running vista home. The computer does not start and system repair fixed. The error is the root cause "registry is corrupt. What should I do?

  My system stopped responding and I had to make a hard stop.  When I tried to restart the computer, I had a mistake of lying to start automatically.  Commissioning and repair screen came and did his thing.  He was not able to solve the problem. The end result was an error indicating that the registry has been corrupted.  What should I do to get my computer running again?

  Hi Laurayne,

  You can read the following article and try to boot from the disk Installation of Windows Vista to perform a restore system from Windows Recovery Environment.

  What are the system recovery options in Windows Vista?