Why can't I connect to the web?

Similar Questions

• HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

  Windows 7 Pro 64

  Reference Dell

  Printer connected via ethernet

  software worked well until the printer has been replaced by HP under warranty

  in the new device, the screen of the wizard to set the time/language etc.

  Software HP does not detect the device and so I can not use all the features.

  I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

  Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

  Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

  Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

  I also tried downloading drivers/full later on the HP site.

  Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

  Hi-Dillion, Declan

• Why can I not connect to the Intranet United when I can do it in Internet explore

  In the past, I have had no problems to connect to the intranet of the secure site. Now, after that I updated Firefox I get a message indicating that a security problem.
  When I go on Internet Explorer, I have no problem connecting to the intranet site for United.

  Does the error 'weak Diffie-Hellman ephemeral key? Someone else mentioned get a few weeks on an employee United Web site.

  If this is the error you get, the server attempts to use an obsolete encryption encryption algorithm that is vulnerable to the attack of the impasse that was in the news earlier this year.

  What does that mean?

  Even if you trust the server, a "dead end" attack compromised the security of your individual connection on the server, a lowering of the protection normally provided by SSL to a level that is easily cracked and read by others on the network. This is why Firefox protects you to establish this connection.

  What can you do now?

  The best solution is to update the server. Please ask for the protection of everyone! However, I suspect this is out of your control and could not happen soon. To work around the problem, you can try to disable these old ciphers in your Firefox, which I hope it will force the server to try some more secure encryption algorithms when connecting with you. Here's how:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste dhe and make a pause so that the list is filtered

  (3) double-click the preference security.ssl3.dhe_rsa_aes_128_sha to true to false (disable Firefox to use this encryption)

  (4) double click on the security.ssl3.dhe_rsa_aes_256_sha preference from true to false (disable Firefox to use this encryption)

  Try again the server; You may need to reload the page using Ctrl + Shift + r to ignore information in cache.

  Success?

• After updating to version 31, Firefox can no longer connect to the web.

  After updating Firefox to v31 and I reworded Firefox is no longer can go to any Web site, while Chrome and IE continue to work properly.

  Steps, I tried:
  -restart Windows
  - https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a & as = aaq
  - https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating?esab=a & as = aaq
  -from Firefox with 'Disabled Modules' (Safe Mode)

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission get full and unrestricted, access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Why can't I connect to the internet with Firefox with HP photo?

  When Im on the internet (with Firefox) and when I run HP photosmart... It will not open it to the internet so I can order prints online... I have ge an error saying... no internet connection... do not understand this... Help

  Thank you... but I finally goes back to a bad cable power cord printer... now, I just need to find a store to replace it... forget HP. There web site is no longer hostile user... will never buy one of there products... only helping you get from them? It is money... so thank you once again...

• Why can't I connect to the internet?

  My home page loads fine but when I try to open a link or something else I get a "server message not connected" what happens if hard wired or wireless.

  Happens on most of the sites.

  What is going on.

  I tried system restore, but to no avail

  Right click on the connection icon in the system tray to run the troubleshooter, report results.

  Then try empty DNS.

  Other steps here for why I can't connect to a network?-Windows help

• Whenever I install automatic updates, I can no longer connect to the internet.

  Whenever I install automatic updates, I can no longer connect to the internet. I perform repressive restore, this solves the problem, until the next update. It already has cost me over $ 300 and now I can is more updated windows if I want to keep my internet connection?

  Hi Beverly,.

  Welcome to the Microsoft community!

  After the description looks like after installing the updates you can't access the Internet. We need additional information about this problem. Please answer these questions to help you best:

  1. What antivirus do you use?

  2. what happens when you try to connect to the Internet after installing updates?

  3. the updates are installed on the computer?

  Provide us the details of the update that you have installed.

  For more information, see:

  See the Windows updates are installed

  Method 1:

  After you install the updates, check if you are able to connect to Internet in Mode safe mode with networking.

  Step 1:  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Check out this link to start safe mode:

  Start your computer in safe mode

  More information on:

  Startup options (including safe mode)

  Step 2:  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, followstep 3in the article by putting your computer to normal startup.

  In addition, visit these links and try the steps listed in the link provided and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and provide us more information if you need more assistance.

• I can\ to connect to the web server integrated on my D7460?

  Hello

  I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.

  Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.

  Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.

  I checked what the said road IP address he gave to the printer.

  Any suggestions would be welcome.

  OK, I seem to have solved the problem.

  I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.

  Who having spent 'WPA only' I can now ping, print and connect to the web server.

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• mylaptop stops as soon as I connect to the web

  I noticed that my laptop starting and wondered why it was closed. I waited for windows load, signed at and shortly after he began to close again. After an investigation, I noticed that it happens when it connects to the web.lan or wifi have the same results.if that I disable my sound connections fine until I try to connect then it stops and restarts. It's the same thing in safe mode. I did a factory reinstall but nothing seems to help.any ideas?

  Hello

  According to the description, it seems that you are facing problems with the Internet connection, the computer automatically shuts. I'll be happy to help you in this problem.

  -Type of connection that you are using? (Wired or wireless)

  -Did you do changes on the computer before this problem?

  Method 1: I suggest you to follow the steps from the link and check if the problem persists.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-za/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2: If the problem persists, I recommend the steps and check if that helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-za/Windows7/fix-network-adapter-problems

  For reference:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-za/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps.

• air application connects to the web service although swf don't

  Hey there,

  I will try and be brief. We built a kiosk application in flash builder a pure as3 project. When we went to convert it into an air application all seems fine except for two issues. one is that we cannot use the Security.allowDomain("*"); Tagus. not much we comment on this possibility, but when we do we cannot connect to the web service that we use. Here is the error msg that we get:

  URL http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid = 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  ioErrorHandler: errorProductId: WebApplicationException

  ioErrorHandler: currentTarget: Error #2032: error in workflow. URL: http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid =. 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  Here is the error of charles:

  < error >

  < > 103 errorCode < / errorCode >

  types of arguments < message > Incorrect or combination < / message >

  < errorDetail > WebApplicationException() < / errorDetail >

  false < success > < / success >

  < / error >

  now, if we run just the swf file it connects very well. the only reason I need this app to be in a wrapper of the air is so that I can remove the print dialog box. otherwise, I'd create just an exe file.

  any ideas would be great!

  Thank you

  OK, found the problem!

  When we built the as3 project and we implement web service calls, we used post from get we caused problems. We have been connecting to a service of qa so that may have something to do with it. In all cases, we have changed the headers in the air application to get and it seems to work fine. Why would he works in the SWF and not the air who knows, but there are go!

  Thank you

  Jorge

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• down loaded more recent firefox and now it does not connect to the web.

  Just did the new down load and restarting the Fire Fox cannot connect to the web.
  No problem before this new version.
  IE works fine. Chrome works very well.
  Only fire fox does not.

  You get this error message.

  See also article Firefox cannot load websites, but can other browsers .

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Why can't I connect MY Kodak ESP 5 printer to MY computer?

  Why can't I connect MY Kodak ESP 5 printer to MY computer?

  Why can't I connect MY Kodak ESP 5 printer to MY computer?

  Hello

  The first step will contact Kodak to search for the latest drivers and ask about any known issues installing this printer for the version of Windows you have installed.

  Kodak - Support Home Page:

  http://support.en.kodak.com/app/home/src/gosupport/selected/true

  Find answers: Kodak products

  http://support.en.kodak.com/app/answers/list/session/L3RpbWUvMTM2NDY2ODYyMy9zaWQvdnVDUU50bWw%3D%2Fselected%2Ftrue/selected/true

  Concerning