Why CF11 seems to sleep after no access in a few minutes?

Similar Questions

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• In Windows 7, crashes after being idle for a few minutes

  COMP. CAME WITH VISTA HOME PRO. HDD OUT CRAPPED.  REPLACE HARD DRIVE WITH PROGRAM T1 & ADV. WITH WINDOWS 7.  INSTALATION WENT WELL. BUT COMP. A LOCKED UP AFTER SITTING A FEW MINUTES PRESENCE REPAIRS.

  Please have a read of this page - resume idle freezes. May have tips on there for you.

  Above all, make sure you have the latest OS updates as there have been updates of stability.

• Why my computer will sleep after 3 minute

  my screen goes black after 3 minute... why?

  Hi oceansUK,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Configure Windows XP power management

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/configure-power-management

• After the last update a few minutes ago, Firefox open all web pages.

  I was on a local web page run by a local server on my intranet. Firefox was not open. I opened it (last time it worked successfully was a few hours ago). He did an update. After the update, he tried to open a web page in Firefox - failed. Local web page, I was sure would not open either. Web pages to function in Internet Explorer.

  Problem was Firefox hanging in the Task Manager - task once I stop the task, I re-run Firefox and had no issue. A big thank you to all who tried to help.

• When using OS 10.11.4 after using Safari for a few minutes, the system freezes, the only way to UN - freeze is to close the system with the power switch on my Mac Pro early 2008. Any ideas?

  When you use Safari on my system Mac Pro 8 core early 2008 if will freeze with no other way to free it up it's close with the power button.  Any ideas?

  Once you can restart go immediately to disk utilities and run repair disk permissions.

  When is check your Safari to make sure you have the version appropriate for your machine.

• Computer go in mode sleep after a few minutes

  original title: time problem

  Why all of a sudden (today) my monitor off after being idle for a few minutes?  And then, in a few minutes, I re enter my password sign >

  Hello

  Right click on the desktop - customize - Screen Saver - uncheck the "On Resume, the logon screen".

  Panel - Power - top right of control Options - require a password on wakeup - tick don't require passwords
  -Save the changes.

  You can also change the settings there to Dim or turn off the screen and those of sleep.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 360 13 inches x spectrum: spectrum x 360 8.1 Windows stops to get into sleep after a few hours

  My x 360 spectrum stops to get into sleep after a few hours of normal behavior.  In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period.  It can then be woken up and work normally and then to go back to sleep after inactivity - during a few hours.  It stops working after the computer has been for a few hours.  I don't know exactly how much time must be in place before this problem starts, but once it ceases to be able to sleep, the only way to solve the problem is to reboot the system.  Once the problem occurs, the computer turns off the screen but that's it.  He will sleep if I do it manually by pressing the button of power or a click on the Windows button and forcing them to sleep or hibernation.

  I watched powercfg /requests and there is nothing listed that could prevent sleep.  I ran also report with fluo compact powercfg and it also does not list something that prevents apparent sleep.

  NOTE: The energy report is also EVEN if the system still works correctly.

  I could use help to determine what is the cause of this condition.

  Thank you.  See below for diagnostic information:

  Here is the result of the /requests powercfg command:

  C:\Windows\System32>Powercfg /requests
  DISPLAY:
  None.
  
  SYSTEM:
  None.
  
  AWAYMODE:
  None.
  
  PERFORMANCE:
  None.
  
  PERFBOOST:
  None.

  Here is a release of energy report (Note: site Forum HP changed the HTML code):

  Power efficiency Diagnostics report
  X 360 computer name
  Analysis time 2016-01 - 06 T 15: 16:32Z
  Scan duration 60 seconds
  System manufacturer Hewlett-Packard
  Product system name HP spectrum x 360 Convertible 13
  Date of the BIOS 10/23/2015
  Version of the BIOS F.2D
  Build OS 9600
  PlatformRoleMobile platform
  Plugged In true
  Number of processes 164
  Contexture 1892
  Report GUID {f8670991-ccc2-4c9e-b743-81cb15d13b03}
  Results of the analysis

  Errors

  Suspension device: USB get USB selective suspend
  This device is not in the State of selective suspension of USB. Processor power management can be prevented when the USB device is not in the State of selective suspension. Note that this problem will not prevent the sleep system.
  Name of device Microsoft mouse and driver detection keyboard (USB)
  Host controller ID PCI VEN_8086 & DEV_9CB1
  Host controller location PCI bus 0, device 20, function 0
  Device ID USB\VID_045E & PID_0745
  1 port way

  CPU utilizationrocessor use is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
  Average use (%)     11.12
  Platform power management capabilitiesCI Active Express - State Power Management (ASPM) disabled
  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  Device drivers:
  Devices with missing or misconfigured drivers can increase energy consumption.
  Card device name Cisco Systems VPN for Windows 64-bit
  Device ID ROOT\NET\0000
  State of the device 0 x 1802401
  Code 0 x 16 device problem

  Caveats

  Platform timer resolutionlatform Timer resolution
  Default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the resolution of the timer is increased, processor power management technology may not be effective. The resolution of the timer can be increased due to media playback or graphic animations.
  Current resolution of the clock (100ns units) 10007
  Maximum Timer (100ns units) 156250
  Platform timer resolutionutstanding Timer request
  A program or service has requested a resolution of timer is smaller than the maximum platform timer resolution.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 8464
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.48
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 1360
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,58
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 9788
  Average use (%)     1.08
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name HPSF.exe
  PID 11968
  Average use (%)     0.71
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\System32\win32k.sys 0.10
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll 0.10
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name netsession_win.exe
  PID 5828
  Average use (%)     0.67
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.10
  \Device\HarddiskVolume4\Users\Zeldar\AppData\Local\Akamai\netsession_win.exe 0.04
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 5712
  Average use (%)     0.63
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome.dll 0.35
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.11
  \SystemRoot\system32\ntoskrnl.exe 0.08
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process system
  PID 4
  Average use (%)     0.55
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.05
  \SystemRoot\system32\DRIVERS\dne64x.sys 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process explorer.exe
  PID 3988
  Average use (%)     0.43
  Module Module average use (%)
  \SystemRoot\System32\win32k.sys 0.15
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 7920
  Average use (%)     0.39
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.22
  0.14
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name WWAHost.exe
  4604 PID
  Average use (%)     0.28
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.10
  \SystemRoot\SysWOW64\ntdll.dll 0.03
  \Windows\SysWOW64\jscript9.dll 0.03
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name UoipService.exe
  PID 2544
  Average use (%)     0.25
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\system32\drivers\afd.sys 0.02
  \Device\HarddiskVolume4\Windows\System32\mswsock.dll 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 6600
  Average use (%)     0.24
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,18
  0.04
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.00

  Information

  Platform, resolution: timer Timer application stack
  The battery of the modules loaded for the platform timer low in this process.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Call stack \Device\HarddiskVolume4\Windows\System32\ntdll.dll module
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\WPF\wpfgfx_v0400.dll
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll
  Political power: Active Power Plan
  The current power in use plan
  Plan custom name
  Map of GUID {e427f965-afc6-4f07-b387-e9be116f159e}
  Power politicsower Plan personality (on battery)
  The personality of the current power plan when the system is on battery power.
  Personality power saver
  Political power: video quality (on battery)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Mode of quality balancing video quality and energy savings
  Power politicsower Plan personality (Plugged In)
  The personality of the current power plan when the system is connected.
  Personality power saver
  Political power of political power Radio: 802.11 is a maximum Performance (Plugged In)
  The current policy of power for compatible 802.11 wireless network adapters is not configured to use reduced consumption patterns.
  Political power: video quality (connected)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Quality optimization for video quality mode
  Success of queries: analysis of system availability
  The analysis was successful. No problem of energy efficiency have been found. No information has been returned.
  Battery information: battery
  Battery ID Hewlett-PackardPrimary
  Manufacturer Hewlett-Packard
  Serial number
  Chemistry LION
  Long term 1
  0 seal
  Nominal capacity 54720
  Last full 54720
  Platform power management capabilitieslooking at the States of sleep
  Sleep States allow the computer to access the modes low power after a period of inactivity. The waking state S3 is the State of default Eve for Windows platforms. The waking state S3 consumes only enough power to preserve the contents of the memory and allow the computer to return to work quickly. Very few platforms are supported States S1 or S2 sleep.
  False S1 sleep taken in charge
  False S2 taken sleep support
  True S3 Sleep taken in charge
  True S4 sleep taken in charge
  Platform power management capabilities: connected standby support
  Connected standby allows the computer enter a low power mode in which it is always on and connected. If supported, connected standby is used instead of the system sleep States.
  Connected supported watch fake
  Platform power management capabilities: Adaptive brightness is supported.
  This computer allows Windows to automatically control the brightness of the built-in display.
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 0
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 1
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 2
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 3
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Controls of Type ACPI Performance (P) performance / Throttle (T)

  I found a thread on Microsoft answers community web site.  Unfortunately, it seems that Microsoft has not fixed even though this thread is over a year.  This has been driving me crazy.  In any case, the problem is with Windows 8.1 and is caused by the use of a Microsoft account to connect to the computer.  If the account is not connected, after a few hours the computer stops to fall asleep.  If you close the MS account, then the computer will sleep normally.  My dose is to convert my connection from the local computer to a local account and disconnect from Microsoft.  This process is easy to do, go into the settings of PC and disconnect the account.  It will keep your original profile.

  Here is the link to the thread that got clued in the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-refuses-to-sleep-automatically-idle/6ab4aaaf-31bd-4baf-ABC6-62ba8c8260aa?DB=5&page=2&rtAction=1452178632575

  I consider this resolved issue that HP is concerned.  Microsoft needs to address the issue.  I'm not interested in switching to Windows 10 for compatibility reasons and, in this regard, the same problem can exist in the W10.

• After a few minutes of use, Firefox becomes suddenly unable to access most of the sites.

  Firefox running on the latest version of Fedora, after a few minutes of use, Firefox becomes unable to access many Web sites. It seems to be limited to the Web sites I visit frequently, but it is difficult to say. It affects all sites, however. It also affects the same sites every time. Restart the browser fixes it, and that it will often resolve itself given sufficient time, also.

  I tried to clear my history and cookies, reset the browser and navigation without any active modules, but nothing seems to have an effect.

  Try disabling IPv6.

  • http://KB.mozillazine.org/Error_loading_websites#IPv6

  Check also for other issues.

  You can try to reset (power off / on) of the router.

• Portege Z10t - A PT132A goes to sleep after 60 seconds of noninteraction

  Portege Z10t-A PT132A-00F00T

  My Tablet continues to go to sleep after about 60 seconds of noninteraction.
  I can watch youtube, read, listen to music... etc and after about 60 seconds of me not to touch the display turns on outside and all the audio and video stop.
  As soon as I touch the screen it wakes up again.

  I was in the power options and retouched for the power supply and battery.
  I put Sun/Eve forever to the two options as a test, but still it does.

  I missed a place where it is defined elsewhere?
  Very annoying

  Thank you

  Post edited by: Jayp

  Hello

  Is it in laptop mode when Toshiba keyboard Dock is fixed or in tablet mode only?
  Is it if the adapter is connected or only when the adapter is removed?

  The computer will automatically mode 'sleep' according to the sin of setting power options. To access this click
  Office-> Office help-> Control Panel-> system and security-> power options options
  (or Win key + X-> power options)

  Here you should find the option called display auto power OFF
  This feature automatically cuts off the power to the screen when there is no input of keyboard for a while

  You can also see the hybrid sleep feature that appears also in Power Options.

  In addition, I recommend check you the settings of Intel Display Power Saving technology.
  This feature is enabled by default and controls the current consumption b< optimizing="" the="" picture="" contrast="" and="" internal="" lcd.="" this="" can="" be="" used="" if="" notebook="" is="" running="" in="" battery="" mode="" and="" using="" the="" internal="" lcd="" display="">

  To access this feature, he must right click on the desktop, and then click graphics properties
  -> Select battery from the drop-down list in the power source, and then click Power.
  Then, clear the checkbox display energy saving technology and lick OK.

• Satellite P10 automatically goes to sleep after 15 minutes

  My Satellite P10 automatically goes to sleep after 15 minutes. This is a setting that is controlled by Toshiba or the Console of Toshiba power management settings.

  When I change the settings it the system will always standby after 15 minutes. When I go into Control Panel control/Performance and Maintenance/Power Options, it tells me to go to the Toshiba power management to change the settings, but I still see the parameters in grey indicating the standby time of 15 minutes.

  But in the Toshiba power management, I can't seem to be able to adjust the sleep settings, so that they work effectively. There must be something for her...

  Can someone help me understand?
  Thank you very much
  Lerak

  Hello

  The fact is that if Toshiba energy saving is installed on the laptop Toshiba, the Microsoft OS power management doesn't work. You must use the Toshiba power saver to change settings.
  In power save you will find different modes.
  If the power supply is on if you need to change the power mode in the power section. Here, you simply mark the mode full power and click for details.
  You can now find mode properties. Select the Power Saver tab.
  You will find various controls that are responsible for different functions. Change the settings on the standby system controller.

• Why Vista won't sleep?

  My Windows Vista laptop will not fall asleep (a bit like my niece of 3 years and his nephew).  I press the power button and it shutsdown, then the moon just above the keyboard lights, which indicates the mode 'sleep'. Then, there is a beep, and he "wakes up" and asks me to connect.  Why he will not sleep and how to fix it?

  Then, when I fall asleep, the computer is idle for a certain time and set power options my PC in "standby", then it will beep and power back on - all night long (the situation is even worse if I close my blanket and he travels between going to "the sleep mode" and turn on/off.)

  Also, I read in the help file on a different type of sleep called Hibernate (or something like that). But the help file didn't tell you how to turn on hibernation. There is no Hibernate option on menu close of session/stop/restart on the start menu (what you call). How do that (after I fixed the first problem)?

  Thank you
  -Jeff

  Hello Jeff999,

  Please use the Forum for answers.

  Solution:
  
  > Enter the Device Manager.
  > Right click on the wireless network device and click Properties.
  > Click power management.
  > If 'Allow this device to wake the computer' was not selected, select it and click OK.
  

  Also check with the following link.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00845808&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN

  That should solve the problem.

  Thank you.
  «See you soon "»

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

• 10.8.3 OSX don't rest not in mode "sleep" after the installation of the wireless HP4620 printer

  I installed the HP4620 wireless printer, now OSX you waking up from his sleep after about 15 minutes, it didn't happen until I installed the HP4620.  So I opened a terminal and did a search for why the printer wakes up, the result was:

  Wake up the reason: GLAN HDEF EHC2

  I couldn't find any information about it, so I turned off and unplugged the printer, then turn on the computer sleep (which "now takes about a minute to sleep), now OSX wakes up after 45 minutes. So with the printer off and it's wake up yet, I think it must be something to do with the HP software installed?

  Does anyone else have this problem?  Any suggestions to correct sleep would be appreciated.

  Thank you

  Thanks for the reply but reset the SMC did not work, I have reinstaled 10.8.3 OSX then the printer and sleep works again.  Forgot to mention, I am running a Hackintosh on a Gigabyte H77N-wifi Board but never had any problems with sleep or HP printers, it not was not up to what I have installed the HP4620 sleep has become is down with insomnia.

• We put the mode 'sleep', after 3-4mints that we are once again, sleep mode does not

  Windows 7 Home Premium 64 bit,
  When you click on SLEEP MODE, after 5mints we take again the laptop.
  works do not laptop Reboot to start,.
  Thanks for giving me something to Solutions.

  Thank you
  Ruby

  Hi Ruby Singh,

  I suggest you try the steps from the following link:

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  See also: a computer that runs Windows 7 seems to sleep, but then he wakes up immediately
  http://support.Microsoft.com/kb/972664

  Hope it will be useful. Incase if you still have any other queries please respond with more details and we will be happy to help you.

• Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available

  Why my drive showing full after having activated the bitlocker encryption? My d drive is 180 GB. only up to 20GB file is available.

  If you want just a report of chkdsk on your C partition select Start, run, type "cmd" without the quotes in the box and press ENTER. Type chkdsk, and then press the ENTER key and a report, stating, among other things, a summary of how disk space is used, is provided. If you want a report on a partition or one drive other than C, you need to go to this partition. To access F, where F is the required partition you type F: and press the ENTER key.

  Copies of the reports from a command prompt can be tricky. Right click and select mark. This allows to highlight the selected text, and then click on copy. You will then open Word, Notepad or similar file, right click and paste. The selected text transfers your Clipboard to open the file. You can paste directly into a response message to the majority of the forums.

  In Windows 7, you can use a command-line high;
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html