Satellite A100 - Taken Broken headphones

Hello

As a result of obvious negligence, I broke the hack of headset plastic on the front of my A100 until still accept a but is barely staying in there.

Anyone know if its easy to replace by myself with a soldering iron and the part? How it is connected to the card?

Thank you

Hello!

Normally the headphone jack is soldered/fixed on the motherboard, and this means that you need to replace the motherboard together. In addition, the laptop must be disassembled full and it's a little tricky.

In your case, I would go to an authorized service provider. Speak with the technician and then you'll see what they can do for you and how much it costs. I think this would be the best option.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A100-049: which headphones should I use?

    Satellite A100-049
    I want to buy a pair of headphones for use with this laptop and my home stereo.

    I have two models in mind, but I'm not sure of the implications of the impedance: one model is 70 ohms and the other is 300 OHM. It would be more appropriate than the other?

    I can't find information on the sites web of Toshiba on adaptation of impedances taken helmet or exit. Can anyone help please?

    Thank you, John

    Hello

    Unfortunately, it seems that Toshiba does not provide information on catches of helmet.
    I m not a guru of helmet and I n t a great experience with performance headphones but I found a very interesting site on->

    Headset frequently asked Questions
    http://www.headwize.com/FAQs.htm

    Maybe you'll find some useful tips

  • Satellite A100-237 - Broken map supply

    I bought a laptop "Satellite A100-237" for about a year.
    After months, I made a big mistake when I plug the battery bus power supply.

    Unfortunately, it doesn't work after him.

    When I take it to the Office, they told me that the power Board is broken down.
    They asked me to pay $ 500 to fix it.

    Now, I live in Syria, and I want to get this card of the Germany.
    So I save money.

    Can someone tell me if this card exists in Germany and how much it costs?
    They can ship it to the Syria?

    Please provide me with all possible details, so I can choose the best solution.

    Thanks in advance

    Hello

    I think in your case, only the authorized service provider could help you.

    Here on the Toshiba page you can find phone numbers and addresses with the Toshiba authorized service providers around the world.

    http://EU.computers.Toshiba-Europe.com-> support download &-> find an authorized service provider

    I recommend to contact some FSA in Germany or the Syria and ask for details.

    Good luck

  • Satellite A100-036 - label Microsoft OEM are broken

    Hello!

    Tag Microsoft OEM on my Satellite A100-036 (s/n 37059063Q) has been partially damaged, and I can't read product s/n (Windows Vista HB).

    How can I fix this label? Or I have to buy the new OS?

    Thank you.

    Hello

    The serial key belongs to the Windows operating system which is part of the Toshiba recovery image.
    This means that, in most cases you cannot use it as part of other versions of Windows.
    Moreover Windows system which is part of the image is already enabled for this serial key is not really necessary
    If you don t have a recovery disk (maybe you forget to create it in the past) you could try to order it here: http://backupmedia.toshiba.eu/landing.aspx
    But I don't very well if this would be possible because of the age of the computer laptop m

    In the case otherwise you need a Microsoft disk to install the Windows OS, but in this case, each Microsoft Windows disk is provided with own serial key

  • Satellite A100-308: is there an audio S/PDIF taken?

    Hello

    Sorry if this question was asked several times but I have no clear answer to this: laptops Satellite A100-30 [789] series have a digital audio output?

    I'm pretty happy for the moment of my A100-308 (PSAA9E), but would be really great to be able to connect to my home theater system. On comparators, I found that the A100-307 and A100-309 seem to have a S/PDIF output - so use it the HD Audio chip on board - but no info on such a capability for the A100-308... It seems that this model has existed just long enough for me to buy it :)

    I also found information about an external docking station (named Dynadock in my memories) which seems to provide S/PDIF and DVI - I output for the A100 series, I have to find one to take advantage of its 7.1?

    Thanks in advance for any link/howto!

    Hello

    you have a link where this dynadock is shown? It would be interesting for me, because I have the same thoughts as you...
    But I must say one thing: I never see not a S/PDIF out on a laptop and it would be very interesting to know what kind of machine you need. :)

    Welcome them

  • Sound problems after installing Vista on Satellite A100

    Hello

    I have something new, something I've never seen and I do not much [as appropriate] of you.

    Today, I installed Windows Vista Beta 2 on my laptop Satellite A100-192. As it is Vista compatible now [I added some memory] I think it's the right time to see the new operating system [that is great, he will rule the world for sure].

    But back to the topic.
    After the installation of Windows Vista, which has detected almost all of the software in my pc and have fun on this topic / and there are a lot of things an old fart like me, can have fun with / I decided it's time to get back to work.
    So I restarted my toshiba for win xp, started working and has decided that music will surely improve my / concentration i'm from Poland and as many of you know, my team lost the first game of the 2006 World Cup. so they will not pass the group stage of WC2K6--real cause my humor today. After turning on my foobar, I realized that I don't hear nothing/i do not drink, so he can't really be the cause. I've set all volume settings, all the settings of the sound and nothing! I tried headphone jack, but it does not work too. I tried reinstalling the drivers, reboot the system several times and... nothing.
    I went back to Vista and... sound works like a charm.

    Bromine to Vista my sound on XP...

    Anyone has any bright ideas, how this could have happened and how to solv it / accept to remove vista from windows...?

    I would be greatfull for some advice...

    Best regards
    Krystian

    Hello Krystian

    If you use recovery media supplied for installation of WXP is the noise problem persist?

  • Satellite A100 - defective speakers, gives the crackling

    I have the Toshiba Satellite A100 model.
    My speakers do not sound right.
    Left speaker does not work.
    They give a crackling.
    Audio, video, doesn't sound right.
    Whenever I play a song it gives a feeling of speakers are blasted.
    When I turn the volume down they sound a little ok.

    Advice needed.
    I need to replace speakers or should I update the drivers?
    Thank you...

    After reading your ad, I think the speakers are defective and must be replaced.
    You can try to change some sound settings to see if something will change.

    In any case, I think driver has nothing to do with it and you need new speakers.

    Have you tested with headset or headphones? How does it work?

  • Satellite A100-998: mono/stereo mix not available under Vista

    Windows Vista and the Microsoft default value "High definition Audio Device" driver (automatically selected and installed by Setup of Vista), no recording device is listed with the exception of the Microphone, Line In, CD Audio, as in this screenshot of the A100-998 in question:
    http://img230.imageshack.us/img230/1981/a100998jp6.PNG

    No new Mix or record Waveout options of the device, which means that you can not, for example, doesn't record audio stream on the Internet. I tried the latest drivers from Realtek HD Audio for Vista (30/11/2006 R1.52). No change. Is there a way/driver to enable this as in other Windows Vista machines.

    Is also the audio material in the A100-998 "Vista Premium Ready" with the specifications set out in the http://www.optimalsound.net/?

    It's the third disappointment. The first two were that he has not delivered with the announced NVIDIA GF7400 (came to the square with 7300) and the second is that the hard drive is 4200 RPM (instead of the advertised 5400).
    The third issue is the audio issue detailed above.

    Here is a solution I found, but it is not free (costs $US28.20) and requires users to manually switch the "playback devices" each time that they execute it:
    http://www.NCH.com.au/SoundTap/index.html
    Unlike other programs like Audacity which are based on the Waveout/Mono/Stereo Mix as their sound source (and so do not work in this case), NCH SoundTap installs its own virtual driver and is therefore able to record everything you hear through your speakers in Windows Vista without the need for Waveout/Mono/Stereo Mix. "All the sound elements are"typed"by a pilot virtual directly in the kernel, so the process is perfect digital quality."

    However, it would be better that Vista Realtek/Toshiba/Microsoft "High definition Audio Device" driver is updated to include the Waveout/Mono/Stereo Mix (under "recording devices"), so that programs that rely on it are broken. SoundTap can do on Vista means that it is not a hardware limitation.

    PS new Vista sound effects as Loudness equalization, Room Correction, Bass Management and Virtual Surround are already supported in the current drivers Vista (the driver from Realtek v1.52 and that by default by Microsoft) in Satellite A100-998.

    Post edited by: [email protected]_UK

  • Re: Satellite A100-410 cannot start Windows XP

    Hello

    I have a Satellite A100-410 and I can't start over (in safe mode ok). When starting, it shows the XP screen and after 10 seconds, the screen goes black. We have re-installed XP but no use. We checked again and assume that something is wrong with the video card drivers.

    So we checked for the last but no use. I can boot the laptop when the video card is uninstalled, so it takes to cause something weird.
    Or could it be that the card is broken?

    Hello.

    For sure your video card is ok, otherwise you may see white screen after switching on. The problem is in the driver problem. Have you downloaded the Toshiba site display driver?
    Maybe there is a conflict of driver. This site http://downloads.guru3d.com/downloadget.php?id=1655&file=7&evp=c14f9f3787877ee f9ef4b235b9146e96 stage
    Download and install. Then try to reinstall the display driver (if not work, do it in safe mode).

    If she's not always you help, do a search for a new iso Windows Xp but not Windows assembly (some guys like to change windows, deleting and adding some files, and then load it. Most of these modified versions are bad).

    That's all I can suggest now, sorry if does not work.

    Welcome them

  • Satellite A100-2101won ' t I would change the microphone to the speaker jack on

    Hello

    I just bought a system from its 4.1 surround for better sound to my laptop Satellite A100-201 with Windows XP Realtek HD audio on.
    The sound system has two 3.5 mm jacks.

    I tried to put it so the microphone jack acts as the front speakers and headphones like the rear speakers but to Realtek taking it won't let me change the plug microphone, speakers on as only 2 channels are involved in the drop-down bar.

    Anyone got any ideas on how to get it to work?

    Thanks in advance

    Graham

    > but in Realtek it doesn't let me change the microphone jack to the speakers on as only 2 channels are involved in the drop-down bar

    To be honest, I don't think that you will be able to change the mic as a speaker on port port.
    The mic is an audio plug-in interface that receives audio signals! You can't use it as an audio output port!

    Using your speakers, you need an Audio Spliter, or use a special cable that take a 3.5 mm and is divided into several females 3.5 mm.
    Then, you could take your speakers and plug for the two or three (four) 3.5 mm male ends in the female ends that comes out of your headphones Jack (s/PDIF)

  • Satellite A100 (PSAA9) Display Driver for Windows Vista

    Hello world

    This link does not work so I did not install my display driver for Windows Vista and system performance looks really terrible. I was wondering anyone use Satellite A100 (PSAA9) and Windows Vista. Because I was looking for this driver on the internet but I coudnt fint it anywere. This situation made me so sick.
    How to prevent or to send e-mail to the Toshiba customer support any link broken. Or anyome know address direct download for Vista driver? Please help me asap :(

    15/02/07 Windows Vista 97.54 nVidia display driver

    Thanks for your help,
    Mehmet in Istanbul

    Hello

    Try the driver nVidia for Satellite P100 (PSPA0E).
    nVidia drivers work for all their graphics chips.

    Good bye

  • How to get and replace a key on the Satellite A100-522?

    Hey, Toshiba.

    I have a Toshiba Satellite A100-522 model No. PSAA2E-01C01EED and one of my shift keys
    has broken below, so I can't use it (the small plastic bar to balance the key is broken
    If the key "blockages". Can I send it for repair to the warranty, and Ive talked to the
    seller, but I don't have the time to send it for repair (no laptop replacement in the meantime).

    Is it possible to get a new key and replace it myself? I know that some other laptop producers do the same thing,
    rather than use a lot of time on repairs, if they are too simple.

    Concerning

    John Reyes

    [email protected]

    Hello

    Well, it's very easy to replace the keys.
    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20727&MessageID=76283

    But if the key is broken you will need to replace the entire keyboard.
    To remove the keyboard, you have to remove the cover plastic thinking above the F keys.
    Under this coverage, you will find 2 crews secure the keyboard
    Remove the two screws and remove the cable from the flat keyboard which is connected to the motherboard.

  • Satellite A100 - will not charge the battery

    Hello

    I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

    I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

    Best regards
    pawelg

    Hi pawelg,

    I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

    By the way: you can buy a new battery to an authorized service provider. ;)

  • Satellite A100-216: can I move Windows.old for drive external HARD

    Hello

    I got my satellite A100-216 almost 12 months, (and I'm pleassed with it, incidentally), and bought with XP, but she has the option (taken) to get the upgrade to Vista Home Premium.

    I have finally plucked courage to Vista and have a question.

    In the book, it says that the hard drive will be completely erased, and all must be safeguarded. OK - did this.
    It lights up during loading to say that only a full upgrade is possible and that the old windows will be stored in a folder called "Windows.old" even if the operating system will be unusable.
    There seemed no option but to agree with what is happening and lo and here is the record + Windows.old + is here, and it's * Gb * 6 in size!

    After saving everything, can I really keep this large amount of things on my HARD drive. I can move it on my external hard drive?

    The capacity of the HARD drive, (nominally 100 GB) but showing 93Gb shows 24,6 now used by Vista without other programs or drivers installed.

    If I remove this 6 GB, I'll have a more reasonable 75 GB to play with.

    The other option would have been to start on an OEM XP disk, opt for delete and re-create a primary partition and load Vista from there after the format. Would it be: r: work and B: use less space.

    If the 6 GB file is all that it would save, I'll just save it on my external HARD drive.

    Thanks :)

    Post edited by: dave1510

    Hi Dave,.

    The Windows.old folder is a backup of your files/folders/settings of your XP system etc.

    It is automatically created during the process of update for Vista and is designed as a quick way to return to the earlier version of the operating system if you need to do. \obviously its value will decrease over time, once you start using Vista, because different files will become obsolete with the use.

    The normal procedure is to remove these backup files "shadow", once you are happy that Vista is not working properly and there is an option to do it for you in the utiliy Vista disk cleanup.

  • Satellite A100-495 - Intel 3945abg wireless network card cannot find wifi networks

    Greetings,

    I have some problems with networks wireless on my laptop Satellite A100-495.

    The problem is: my wireless adapter (intel / pro 3945abg) doesn't seem to find wireless networks. If I portable place very close to my router wireless (such as 1 m) - connection can be established. If I move away (~ 5 m)-no connection or 'very bad' quality and constantly broken. Other notebooks I've tried still have "very good" quality at the same range.

    This happens with other routers as well. And I can not any sign of wi - fi in my Uni (my colleagues have no problem with their machines).

    I tried to play up with some parameters. Reinstalled adapter. Downloaded the latest drivers. Nothing helps.

    A tip? Thank you in advance.

    Hello

    Something like that happened to me a long time ago.
    I used the Wlan configuration option to own Windows. For several months, I use the Intel Proset configuration utility to establish the WiFi connection!
    It works!

    In addition, I have disabled the power Wlan option in the Wlan card properties save and adjust the intensity of the signal at top. I remember, in the advanced properties, you can find the 802.11 option preamble. The value is Long and short on my laptop.

    Hey dude... Check it out.

Maybe you are looking for