In Windows 7, crashes after being idle for a few minutes

Similar Questions

• My new Windows 7/64 bit computer Dell freezes after being idle for 20-30 minutes

  Some basic information:
  (a) my laptop is brand new, I bought it less than a month ago and I started experiencing this problem in the beginning, very annoying.
  (b) my laptop freezes after inactivity for 20-30 minutes, I have to remove the power cable and reconnect it to restart the computer
  (c) the freezing happens daily when I have access to the Internet with Internet Explorer or Google Chrome, no difference between these two.
  (d) I have Windows 7 Home Premimum with the latest updates.
  (e) I get no error message when the computer freezes, it freezes only when idle, as when I leave my computer for 20-30 minutes
  (f) I ran the disk check, I did the clean boot and I have configured the power setting, but the problem persists.

  Can someone help me? I searched this problem on the Internet and it seems to be a common problem with Windows 7. I've never had such problems with my previous computers with Windows XP and Windows Vista.

  This isn't a common problem.

  Do you have what programs or utilities maintenance installed?

  This external devices you have connected?

  Using Dell DataSafe? If not, uninstall

  Do you wrong used windows update to install the recommended updates, as apposed to important updates?

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• After the upgrade from Office 2007 to Ofice 2010 on my Vista, then my computer turns off after being idle for a while.

  After upgrade Office 2007 to Office 2010 on my Vista, then my computer turns off after being idle for a while. When I turn on my computer, I get the splash screen indicating that Windows has finished unexpectedly and I would like to start in safe mode or normally (pluss a couple more choice...).

  Appears not to occur if there is activity going on--as if do me some work or have itunes playing music or I'm just surfing the internet. Curiously, it seems not to happen if I close Internet Explorer and Outlook.

  I shot all automatic updates for Windows Vista (32 bit) and Microsoft Office.

  Concerning

  B Odd Andersen

  Hi B Odd Andersen,

  I want to clarify if your computer seems to be sleeping or it completely closed after being idle for a while.

  Method 1: If the computer is in power saving mode, check if you can wake the computer from this State by moving the mouse or pressing any key on the keyboard.

  Method 2: Change the power to another and check to see if the problem persists
  Change, create, or delete a power plan (scheme)

  Method 3: check the logs in event viewer for more information on auto-off down

  Open event viewer

  What are the information in event logs? (Event Viewer)

  Note: For your safety and security, it is not recommended to disable Windows Update.
  Activate the update or disable automatic

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer sits idle for a few minutes - screen is blank

  I HAVE WINDOWS 8. IF I LEAVE FOR A FEW MINUTES, THE SCREEN TURNS OFF, I HAVE TO CLICK THE MOUSE OR HIT THE CONTROL, OR THE WINDOW KEY

  TO GET BACK ON MY SCREEN. COMPUTER FUNCTIONS CANNOT BE USED UNTIL A MINUTE OR TWO. HOW CAN I FIX THIS?

  Change your standby or hibernation settings, but also the other parameters of power supply to your taste...

  Do you need information?

• Windows crashes after leaving idle for 20 minutes approximately

  Hi, my windows hang after that I left it idle for about 20 minutes. It happens every time it is on idle. even when my leave the music player. I have searched the web for solutions and tried to start windows in safe mode or a boot of cleab nothing helps. I tried to run a SFC scan and it came up with several errors. What should I do now?

  Hello

  
  It seems that problem with the corrupted hard drive.
  
  I'm offering please contact the manufacturer of the system for the best assistance.

• Internet connection disconnects after that I let it idle for a few minutes

  I have Internet Explorer and Windows 7, and after I have let any inactive site for a few minutes, I have to enter my password once again as if I'm starting for the first time.  After I entered my password for windows, it goes immediately to the site I've been on previously.  It started about 4 months ago, and I have no idea what caused it.

  Hi Marquette.

  To provide the proper resolution, that I would need more information on your side.

  1. this problem occurs only while browsing Internet?

  2. did you of recent changes on the computer before this problem?

  I suggest you to change the screen saver settings and check if it helps.

  a. right-click anywhere on your Windows 7 Desktop and select Customize from the context menu.

  b. in the customization window that opens, click on the screensaver icon in the lower right corner.

  c. in the screen saver settings , uncheck the check box labeled in curriculum vitae, the logon screen.
  d. click apply and then click OK.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes

  As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.

  I'm sorry to see it, but you will need to contact your local care Xperia

  http://support.sonymobile.com/global-en/contactus/

  Request a trial of vacuum.

  The crack may be the cause of the water damage.

• After that the computer is idle for a few minutes, you receive an error message. "Vtdispl display driver does not work properly, please restart the computer to solve the problem."

  I rebooted and turned power off the computer several times and always get the same message. The size of the text on the screen and the icons are larger than the way in which they should appear. How can I solve this problem?

  Consult the manufacturer of your so great PC OEM, for example Dell / HP or laptop and install the latest drivers.
  If a visit generic PC your graphics card maker or manufacturer of the motherboard and install drivers lates
  Do NOT get the drivers of MSUpdate

• I tried everything to get this site to open in a new tab when my firefox is idle for a few minutes. Can you help me?

  http://dailynews-health.com/resp/in/?ref=clickater.com&tid=YnJzcj0zMzU4JmJvPTExOCZjaXBpZD0yODY5MjIwJmNpc2lkPUUxOUNFREEyOTkyMDIwMDk1MjM1Njk3MiZjaXJpZD1FMTlDRURBMjk5MjAyMDEwMTY5Nzk3NzU2MCZzbGlkPTkyMTc4JnN1YmlkPTU5NDM5OCZjaXVpZD0tODk2NTg2NDk2NDY1OTMwOTY1OSZzbz0xMTgmY3JpZD0zMjA3NzQ4JmV4Y2lkPTIyJm1tdD0wJm9zaWQ9NTMyJmNudHJ5PTk4JmNpY21wPTU1NDQ3OCZjdTQ9LTEmcHViaWQ9OTI2NTg=#/

  This is a spam site and has audio that sounds for sure!

  I don't know if it's directly relevant to your problem, but you should disable-disable/remove your update of plugin DealPlyLive.

  Search on Google will give you the general idea that it is malware. Do you know what it is? Use it and you know where it comes from?

• When using OS 10.11.4 after using Safari for a few minutes, the system freezes, the only way to UN - freeze is to close the system with the power switch on my Mac Pro early 2008. Any ideas?

  When you use Safari on my system Mac Pro 8 core early 2008 if will freeze with no other way to free it up it's close with the power button.  Any ideas?

  Once you can restart go immediately to disk utilities and run repair disk permissions.

  When is check your Safari to make sure you have the version appropriate for your machine.

• Windows 7 freezes after being on 3-10 minutes

  Installs Windows 7 on the own Shuttle XPC SD30G2B, OS crashes after being on 3 10 min active or not.

  Try disconnecting all non-essential devices you may have attached to the system to see if the problem goes away.

  If the problem persists, try to start safe mode, start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. Select Safe Mode.

  If the computer starts correctly, then the offending device attached to the system.

  If you continue to experience problems, reconnect,

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem continues to exist, I suggest you turn off your system, unplug it, open the system unit and check to make sure components such as your video card and memory are all sitting correctly.

  If the problem still persists, try the following:

  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.
  7. in the system recovery window, click option memory diagnostic

  Reboot your system, a scan of your memory of your modules memory will take place to verify any defects.

• HP Officejet 4620: Network printer shows unable to communicate after being unused for 4 hours.

  Printer prints as it should after being turned on.  After being unused for about 4 hours but always enabled, when ordered to print the printer does not print and the computer displays the error "unable to communicate with printer."  However, if the printer is then turned off and then turned back on, it prints without error.

  There are a few possible solutions.

  1. Firstly - check if your firmware is up to date. (Firmware update instructions)

  2. make sure that your point of Wi - Fi networks firmware is up-to-date.

  ? -Is this wireless light (little blue light by the wireless button) stay on all four hours?

• Several applications have frozen or stopped working after connecting to the server for a few minutes

  Hi all

  I am facing the problem with my windows server 2012 R2. After I connect to the server and leave it there for a few minutes:

  • Some of system applications such as device, power, system, etc. Option Manager are stopped working. When I opened them, I have nothing.
  • All my applications c# (.Net Framework 3.5 ~ 4.5) was an error 'could not load file or assembly 'my_reference_libraries' or one of its dependencies. The system cannot find the specified file. ». I'm sure that's not the error I can run the application correctly before this problem occurred.
  • When I open "Manager configuration SQL Server 2014", I get the error "the instruction at 0x0023ae20 referenced memory at 0 x 00000058. The memory could not be read. »

  Strange thing is when this is the case, I can open "Event Viewer" and after opening, everything back to normal. I can open applications, including my c# programs without any error. It's not just my guess that I tried this work many times. Opening every time the "Event Viewer" has solved the problem. There may be other applications system who will be doing that job, too, but I have not tried everything.

  In case the Viewer, I got tons of errors for:

  • GroupPolicy - Group Policy processing failed. Windows could not apply the policy settings based on the register of the LocalGPO Group Policy object. Group Policy settings will not be solved until this event is resolved. View the event details for more information on the file name and path that caused the failure.
  • DistributedCOM - the server {06622D85-6856-4460-8DE1-A81921B41C4B} is not registered with DCOM within the required time.

  What could be the problem? My user session froze? I get trouble solving this for several weeks already and still got no chance.
  Any help would be greatly appreciated!

  Please advise!

  Thank you and best regards!

  Hello

  Any recently installed application? Examine the cpu and memory use?

  Let me you suggest reviewing your material, including memory. Added new hardware recently? A updated driver recently? Please update hardware drivers.

  The following forum might be more appropriate for your question:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com