Why do a DVD/CD-RW-ROM does not recognize blank DVD - RW disc?

Similar Questions

• Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

  My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.

  
  

• PC does not recognize there is a disc inserted and receive code 10 when trying to insert the CD or DVD

  Hi, my cd/dvd drive used to work fine, now when I put a cd or dvd it does not and will not play. I've done all the suggested troubleshooting (cleaning filters, uninstall and re-install drivers, ran several troubleshooting tools and I either get a code 10 or simply "insert disk in drive" little matter how many times I install Disc. re - install my player appears under properties PC said work very well, and I can hear the light but no sound or I'm at my wit's end pic.) , can someone tell me what would be directly tell me if my drive is simply grilled or if it's a driver problem which everything suggests it is, I tried re-installing new drivers directly from the manufacturing and tried several cd / DVD that works on other devices or is known to have worked on my drive before this problem. I am running vista family 32 premium, which is installed at the factory, my PC is a HP pavilion a610t, I would be grateful for any advice... Thank you all, peace, * address email is removed from the privacy *

  * Original title: my cd - dvd drive can play audio/video discs, my PC does not recognize there is a disc inserted and keeps asking to insert a. Help!

  Hello

  The first thing that I would recommend before you do the radical and re install Windows or upgrade to Windows 7, is to make sure that you have backed up your files. Make sure that you have a separate player and follow the steps described in this article.
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  To be honest, it sounds like the drive has gone wrong at this stage. Normally, this sounds like it would be a driver problem, but if you have uninstalled them and are 100% sure that you have installed the good and still no joy, so I think we can exclude.
  Have you tried several discs in the drive, correct? It is not just a problem with the special CD that you use right?
  I would say your best bet is at this time to try another drive on the machine, especially if you do not want to go through the hassle of reinstalling Windows. You may be surprised how well they come these days. The last of them, that I bought on Amazon (I think) was a little more than $25 in the United States.

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

• My new Dell win 8 PC does not recognize my CS5 install disc.

  My new Dell win 8 PC does not recognize my CS5 install disc.

  I'm ready to upload to the web, but I can't find the right site.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• DVD Rom does not recognize DVD

  CD/DVD-Rom is not recognize my DVD

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My DVD ROM does not recognize DVD discs after upgrading Windows XP to Windows 7.

  A few days ago, I updated my laptop to Windows XP to Windows 7. Everything seemed to go well until I tried to burn a DVD disc. The program I use for this purpose is Nero 9.4.26.0. So, I've discovered I don't have problems with writing and playing the usual CD but my laptop does not recognize and does not read or write DVD. Laptop HP Compaq 6510 b and the DVD ROM is MATSHITA DVD - RAM UJ - 860H ATA DEVICE. Please share your ideas about the problem. I really enjoyed this :)

  Some CD / DVD readers may require an update to function well in Windows 7.

• Laptop does not recognize blank CD/DVDs

  Hello

  I just bought a Dell Precision M2800 (early 2014).

  I can read DVDs and CDs normally but I when I put a CD or blank DVD to burn it, it does not recognize it and says 'Please insert a disc into the DVD drive. I tried many solutions of this forum, but none of them worked for me. I tried burning CDs and DVDs even in other laptops and they have worked perfectly.

  Please tell me what I can do.

  As you have already understood, you have a CD-ROM drive (read-only) and is unable to burn discs. You do not have the option to replace this drive with a DVD - RW drive that will burn the discs.

• DVD burner does not recognize blank DVDs, but will recognize blank CD?

  I read through several similar messages, but none seem to have a solution to my problem.  I'm NOT very technically savvy, so this is as much I know:

  I have a Dimension E310

  It was supposed to come with a cd burner and a dvd burner combo.

  The reader says DVD R/RW RW DVD rewritable Compact Disk its Ultra Speed

  I was able to successfully burn CDs from itunes, but have not been able to burn any kind of video file.  In fact, when I insert a blank dvd in the drive, the computer does not recognize that everything is there.

  As I said, I'm not the person most computer savvy in the world.  I know how to work with my applications, but I know little about the way in which a computer is set up, so I apologize in advance if my question is ignorant, but I appreciate any help you can give.  Thank you in advance.

  
  

• Why the f2 of LV 2010 patch does not recognize installation of LV on my Windows 7 64-bit system?

  Hi all

  I downloaded the patch from f2 to LV2010 which is already installed on my PC and launch the setup.exe as described on the installation procedure, but, unfortunately, the patch of f2 does not recognize the installation of the LV and does not install itself. I have installed in my system as LV2012, can it be the problem? Is there a trick to install the patch and send it manually the installation path?

  Thank you all...

  Then This is the download page you should use.

  There is a link to a document containing a list of all the issues in 2010 SP1.

  Norbert

• BD B DH8E2L CD/DVD-ROM does not recognize the drive

  Pavillion H8 - 1117C with a burner BD B DH8E2L.  Using the CD plays his trak - 5 minutes later returned to the for use and it will not beat, not recognize CDs or DVDs.  I uninstalled / reinstalled the device and the software - nothing.  I can hear a little grunting noise, but does not turn upward at the time what it is.  I used a cleaning disc - still nothing.  Any idea?  And, if so, the best place to buy a new one.

  Bobby5

  At all times, Bob:

  Here is the link to the list of the parts for your model.

  http://PartSurfer.HP.com/search.aspx?SearchText=QU043AA

  The blue ray player has part number

  504941 200

  You can search by part number, I guess HP store parts shows, it is no longer available at HP.

  The problem is that none of us are 100% positive, the drive is bad.

  I could take a look at the front of the car and see if there is no generic who would take too long the buttons to open to try it are similar in size and location, this should work.

• Reader SuperDrive does not recognize blank DVD

  Have recently upgraded to El Capitan. Since then, I tried to export photos on the drive to put in stock and my DVD burner in my iMac 12.1 will recognize is no longer the DVD when entered into the burner. What is happening now is that the DVD is sitting there for a few moments and then is ejected. It's almost as if the DVD recorder is headed south. Don't know what to do from here, because it reads the CD and DVD normally and also formats and burn the CD. Just DVDs. and I have tried 1/2 dozen of them does not.

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  and the NVRAM How to reset NVRAM on your Mac - Apple Support

  Try a different brand of DVD.

  But as the CDs and DVDs use different lasers inside the car it is not uncommon for a failure and the other to work again.

• Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

  My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
  The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

  He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

  Someone to help they could offer cause I'm running out of space and I really want to delete my files.

  Thank you

  Hello

  It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

  Another clue;
  Have you tried to delete the upper and lower filter registry entries?
  Try it. Sometimes such procedure can simply bring the reader to life.

  The detailed procedure and description has been published here in the article Microsoft Knowledge base:
  http://support.Microsoft.com/kb/314060/en-us/

  Good luck

• HP Pavillion DV7-1020us, BD - Rom does not play my Blu - ray discs. What should do?

  I have HP Pavillion DV7-1020us, but the BD - Rom not playing my Blu - ray discs. I can play the DVD fine, but I was never able to play Blu - ray discs. I keep an error saying "no program is installed to play Blu - ray discs in Windows Media Center" I also get a similar message with Real player. It is software somewhere on my computer that will help me to play Blu - ray? Thanks in advance for your answers.

  Thank you very much! That solved the problem. I re-installed Quickplay and then ran the updates. QuickPlay installed an update allow me to play the Blu - ray. Strange that the computer have not already installed software to play Blu - ray discs. Thanks again!