why I lose the internet connection when cut the power on my laptop?

Similar Questions

• iMac loses the internet connection when I turn off wifi

  Any help appreciated! I'm not very computer savy! Can my grandson tell me (how) on some things.

  I lose the internet connection when wifi is disabled. It will happen when using any browser, Firefox-Safari-Google Chrome.

  Desktop computer is connected to the modem.

  Model name: iMac

  Processor name: Intel Core i7

  Processor speed: 3.4 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 8 MB

  Memory: 4 GB

  Any ideas? Thank you

  You can use an ethernet cable between the modem (= the internet connector) and the iMac.

  WiFi is like an invisible computer thread worms (among others) the modem. When you switch WiFi off, your computer cannot reach the modem and so there is no internet on your computer.

• When another PC on my LAN boot, my PC loses its Internet connection

  When another PC on my LAN boot, my PC loses its Internet connection.

  Do you have an error message on computers?

  This may be caused if you have configured the computer to use the same static IP address.  To see if this is the problem, follow these steps:

  With your computer connected correctly, follow these steps:

  Open a command prompt window (type cmd in the search box and press enter)

  In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfoONE.txt".

  output

  Start the second computer and perform the following steps (which assumes that the second computer has Windows 7):

  Open a command prompt window (type cmd in the search box and press enter)

  In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfoTWO.txt".

  output

  IpinfoONE.txt of copy on the desktop of the first computer to a USB flash drive and then put the flash drive on the second computer.  Use the second computer to answer here, then paste the contents of ipinfoONE.txt and ipinfoTWO.txt in your response.  Be sure to indicate in your answer given that go with which computer.

• Why have I no internet connection, no cell phone, no wi - fi on the iphone after updating ios 9.3.1 5?

  Why have I no internet connection, no cell phone, no wi - fi on the iPhone 5 after update to iOS 9.3.1?

  Settings network is possibly damaged.

  Tap settings > general > reset > reset network settings

  Then see if your iPhone can connect to a Wi - Fi network.

  You will need to enter your Wi - Fi password.

• Why do I keep losing my Internet connection when I still have a good WIRELESS card on my Windows 7 laptop?

  I always lose my Internet connection but yet my network signal strength is good. This happens on my Windows 7 operating system, but not my Windows Vista operating system. I'm afraid that this could have something to do with the firewall settings? He was repeatedly interruption of connection with the Internet and the two operating systems. Unplug the unit and reset the router solved the problem with Windows Vista, but only momentarily for Windows 7. I ran the diagnosis and resolution of problems. This utility can detect never any problem. Sometimes the diagnostics displays a problem with a connection to the Ethernet cord (but the laptop with Vista OS was fine). I have reset the wireless adapter, which claims to be working very well, over and over again. I have reset the settings of the Windows Firewall to its default settings. Don't know what else to do. Help, please! I fear that the problem exposed my laptop to a potential security threat.

  • I use a public network location setting I got with a security access code
  • Atheros AR9285 802.11b/g/n WiFi Adapter is the adapter connection
  • NETGEAR's router
  • WPA2-PSK is my type of security
  • Radio type 802.11n
  • Windows Firewall on
  • Microsoft Security Essentials on real-time
  • Microsoft Virtual Mini Port Adapter (WHICH I'VE NEVER SEEN BEFORE JUST NOW) displayed in network connections, but is not connected!

  Mindy

  Long @Mindy

  Try this,

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• No Internet connection when the laptop is off mode "Eve".

  When I close the lid on my laptop (which puts the computer into sleep mode) or he falls asleep with the lid open, there is no internet connection when I wake the computer.  I have to either run the Troubleshooter or perform a reboot to get connectivity.  This problem just started and I got the laptop almost 2 years. It runs on Windows 7.  I don't know much about computers.  Does anyone have any suggestions?

  When out of standby or hibernation, your wireless network connection can not reconnect if power on your wireless adapter options are set to a power saving mode. To check or change your current power options, follow the steps below for your operating system:

  1. Open Power Options by clicking the Start button, click Control Panel, clicking system and security, and then clicking Power Options.
  2. Next to your currently selected power plan, click change plan settings, and then click that to change advanced power settings.
  3. Click to expand wireless adapter settings section, and then click to expand the Energy saving Mode section.
  4. If the setting is currently nothing else that "Maximum Performance", click it, and then select A maximum Performance.

  You can also set the setting on drums on "Maximum Performance". For more information on power management, see the feature page of power management on the Microsoft Web site.

• Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

  Hello

  Need help desperate please

  Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

  Hi TomasB,

  Please reset the file browser & Internet hosts.

  Reset Internet Browser refer: change or reset the settings of Internet Explorer - Windows help

  • Close all windows of Internet Explorer that are currently open.
  • Open the office and then tap or click the Internet Explorer icon on the taskbar. Change your settings will affect Internet Explorer and Internet Explorer for the office.
  • Press or click the Tools button and then tap or click on Internet options.
  • Press or click on the Advanced tab, and then tap or click Reset.
  • In the reset Internet Explorer settings dialog, tap or click Reset.
  • When Internet Explorer has finished the application default settings, press or click on close and then press or click OK. You will need to restart your PC for these changes to take effect.

  Reset the hosts file

  Reference: https://support.microsoft.com/en-us/kb/972034

  Mac: How do I edit the file Hosts on Mac OS X - TekRevue

  Reference: Solutions to connection errors, activation and connection with Creative Suite and creative Cloud applications.

  Let us know if it helps.

  Kind regards

  ~ Mohit

• My printer on my laptop makes me lose my internet connection.

  I have a Deskjet F380 printer all-in-one.  I have a Dell Laptop Inspiron 9400/E1705 Vista 32bits. When I plug my printer in my laptop, I lose my internet connection and have no idea why it happens. I get my internet connection when I unplug the printer. I'd appreciate the help. Thank you.

  It turns out that the Ethernet in my laptop goes wrong. The problem turned out to be in this connection. He now works as I put in a new ethernet wire. Problem solved.

• Update invites me to install a service pack Windows, but whenever I do, I lose my internet connection.

  I use internet 8. Windows Update repeatedly continues to ask me to install the service pack that when I do I lose my internet connection and there to remedy, I come to restore the system to a previous date to get my internet connection

  Hi James,

  1 Windows operating system you are using?

  2 are you facing this problem after installing service pack (SP) or at the time of installation of SP?

  If you are faced with the question after the installation of the service pack, you can visit the computer manufacturer and try to update the drivers of network card on the latest version and check.

  Updated a hardware driver that is not working properly

  You also try to launch the troubleshooter from the following link and check.

  Windows wireless and wired network connection problems

• I lose my Internet connection :(

  Hello!

  I have a problem that I have had since I have this PC. I lose my Internet connection randomly without any reason, this happens especially when I play multiplayer games. There is still Internet (in my iPhone, iPad, another PC), but in my PC, it does not exist:

  
  "Network 2".
  "No. Internet access"

  Please help me! :(

  Thank you in advance! :)

  Data sheet:
  Graphics card: GTX690
  Proccessor: Intel Core i7-3960 X
  RAM memory: 16GB

  O.S.: Windows 7 Home Premium

  Kevin

  Hello

  Check your router and check the cable being used. Always updated the NIC (Wired) network
  Pilot - visit Site system manufacturer (manufacturer of motherboard for customized systems) and the
  site of the manufacturer of the real device.

  Since he has passed since you received your computer do not forget to check with the system
  Manufacturer support, their documentation online and drivers, diagnosis and ask for their
  Forums about known problems with this model.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My iphone5 let me download ios 9.3 do not check say I have no internet connection when I have a full service

  My iphone5 let me download ios 9.3 it does not check say I have no internet connection when I have a full service

  version9.2.1

  Many users have encountered problems to update their devices, their activation or signing into their account after updating iOS 9.3. Apple is aware of the problem and working on a fix.

  Take a look at these articles for additional information on the issue or adapt:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3If you cannot activate your iPad 2 (GSM model) updated to iOS 9.3

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more

• network connection 2 without wire - says I have no internet connection when I do

  It is said my 2 wireless network connection not connected and I have no idea what to do, programs such as firefox, spotify and limewire etc. say that I have no internet connection when I do, anyone who could help me with this I would be eternally greatfull as it is originally a certain problems Thank you.

  Go to start / connect to / and select 2 wireless network connection and click on connect.  Enter the name and password if necessary.  It must now be connected (if it is properly configured and configuration correcctly) and you should have access through programs that use this connection.  If the connection is not listed, then it is not setup correctly.

  If you use Vista, here are some tips that might help you.  If another operating system, please post on the networking of the XP Forumshttp://social.answers.microsoft.com/Forums/en-US/category/windowsxp Forum or the Forums of Windows7 http://social.answers.microsoft.com/Forums/en-US/category/windows7 for assistance,

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  You must set up a wireless internet connection in the network as well as the connection sharing normal LAN wireless and connect to it as well as the local connection.  If you don't do this, you will not have an internet connection.  You need both.  You must also enable some features in the main area sharing network to access the internet - they are quite well defined.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error "Unable to connect to GameSpy check your internet connection" when playing multiplayer on FSX.

  Original title:

  Multiplayer on FSX used to work, but now there is an error message that says: unable to connect to GameSpy check your internet connection. What should I do?

  I can connect to the local network, but not to the Internet (GameSpy).

  Hi Matt,

  Thanks for coming with your question in the Microsoft Community Forums.

  It is apparent from your message that you get an error "Could not connect to GameSpy check your internet connection" when playing multiplayer on FSX.

  You can try the steps in this link and check if that helps.

  Microsoft Games: Multiplayer troubleshoot

  http://support.Microsoft.com/kb/819836

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the KB article provided above.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  You can check out the following link and check:

  Support for common issues of PC games

  http://support.Microsoft.com/ph/7745

  If the steps above could not solve the problem then it will be better to communicate with spy Game.

  View the results of the proposed measures. Please let us know if you need help with Windows in the future and we will be happy to help you.

• Why Siri requires an internet connection to work properly?

  Why Siri requires an internet connection to work properly?

  Because his answers do not come from phone, they come from Apple servers. This article can help.

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

• Get an error "the AC power adapter type cannot be determined" lack of the power supply or laptop AC adapter/Power Supply / load disconnected

  * Original title: error when the Power AC Adapter (DA130PE1-100) is unable to connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the i5-2450 M CPU @2.50 GHz. Intel processor recently passed 1 month, I noticed an error in the laptop lacks the power supply or laptop AC adapter/Power Supply / load disconnected

  Can you please let us know why the error is the filler and help us solve the problem.

  I have the DELL AC/DC adapter model number (DA130PE1-100) CN-0ju012-48661-22B-6WRV-A06

  

  Thank you

  Kalyan

  Kalyan,

  This could be hardware related.

  I suggest you to contact Dell Support and check if there is no hardware problem.

  Please update with the State.