Why Illustrator on Windows 7, 64 bit, lasts 30 seconds + to save a single image?
This question is for Adobe, thank you Customer Service.
Why Illustrator on Windows 7, 64 bit, lasts 30 seconds + to save a single image composed of two rectangles only (screenshot below)? I created a document like this to test the speed, because I struggled to save all documents - they hang, sometimes with the message "this program is not responding. Switch to CC is not an option.
If it helps, I can get off at the Adobe San Francisco Office with my computer. I spent a lot of time trying to fix this problem without success.
BTW, Photoshop CS6 records very well.
Thanks again.
I put a printer (in fact, I put it to 'Adobe PDF') and this seems to have solved the problem :-)
I had the default printer for Windows on a network printer... I guess that's what was causing the slowdown, even if I'm not sure of the mechanics behind this affects saving a document (without no impression goes). I need to switch to the printer, if I need to see a copy of the paper, at least, which in my case is rare.
I hope that others will find this thread and solve slow recording as well.
Thanks for saving me "30 seconds x obsessive-ctrl - be ing", Jacob!
see you soon,
node
Tags: Illustrator
Similar Questions
-
Problem opening or creating new files in illustrator CS5 windows 7 64 bit, program becomes "Unresponsive" when opening a file.
I recently tried a trial version of FontExplorer X Pro, and this issue has developed after uninstalling this program. Any suggestions?
Look for the plugin third ant in the folder plugin...?
Check out also in the new user account?
Post edited by: Manish_1988
-
Why my "display windows and tabs from last time ' does not work?
Hi all
I used to have my settings set to "display windows and tabs from last time." For some reason, it does not. Whenever I close my tabs, Firefox warns you me I close many tabs, and when I reopen it Firefox, I only get my home page.
In the menu options, I put 'windows and tabs from last time' options, and in private life, I have "Firefox will remember history", so I do not think it is related to my settings.
I saw a thread on 'browser.sessionstore.enabled' must be true about: config, but I don't have even a name preference that says "browser.sessionstore.enabled. Maybe that's the problem? If so, I have NO IDEA how to fix this. I only am not at all computer savvy.
If someone could find a solution to this very annoying problem, I would be very grateful. If it takes a lot of work of programming/techno, please be VERY descriptive (pretend I'm a 5 year old child in giving directions).
Thank you!
Browser.sessionstore.Enabled is no longer used, worry not if you can't find it.
In case you use "clear history of Firefox closing:
- do not erase browsing history – which will prevent the restoration of the work session.
- Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
- https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history
Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.
Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.
You can check the prefs of . browser.sessionstore * including browser.sessionstore.resume_from_crash on the topic: config page and reset the browser.sessionstore prefs that are correct (in bold) user via the context menu in the default value to make sure that the Session Restore is enabled and functional.
-
I uninstalled and reinstalled Firefox because Firefox does not open home pages that have been defined in the Setup program.
After you have reinstalled Firefox 'shows windows and tabs from last time' whatever the definition of boot options.
What can I do to fix this?Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions and preferences.- Sites Web open is not recorded in less than 25 versions of Firefox.
To reset Firefox, perform the following steps:
For Firefox 29,0 and above:
- Click the menu button
click Help
and select troubleshooting information. Now, should open a new tab containing your troubleshooting information.
- At the top right of the page, you should see a button that says "Reset Firefox"
. Click on it.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
Windows 7 64 bit "last backup failed - error Code Ox80070020"
Acer Aspire 5745 G notebook computer with Windows 7 Home Premium. Intel i3 CPU M350 @ 2.27 GHz 4 GB of Ram.
Backup has never been completed successfully on this machine. I tried a normal and system backup, or complete. I tried also to backup on a key USB and a DVD r same error received in both cases.
I have run CHKDSK C:/f/r and the/scannow STC. No problem detected in both cases.
Then I ran the backup program, accepting the default settings... Same error received "the backup has failed. Error Code Ox80070020'.
I have the East went to the backup settings and changed to allow Windows to choose the default value to use to decide. I unchecked "backup data for new users created. Even if the backup seems further to 60%, before failing and return the above error. Previous backups have failed quickly after the start, 10 to 20% of the progress on the bar.
When researching the problem on a similar problem in Windows Vista (different error message Ox80070002) has been attributed to a missing "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsBackup" registry key Is there a similar key within the registry on my laptop. Searched the registry on my laptop with a negative result.
Any help would be appreciated. Thank you
Hello
Thanks for the quick response.I understand that you have problems with a service named "event COM system +"(event system) - 'Manual' & 'Automatic'. "."(a) the name of the service is "system event COM +" (without the quotes) and that the service should have a manual or automatic status. In addition, should be started.(b) and if this service has a status of disabled or stopped then, follow the steps mentioned below to change the same.1. right click services, and then click Properties.2. If the service is disabled, change status to automatic and if it stops, and then start the service.
3. restart the computer and then check.I hope this helps. Otherwise, answer this answer and we will be happy to help you again.Thank you -
Hello
If I want to make a DVd image for windows 7 that includes SP1, windows live mail, adobe reader, JAVA RE, flash player, microsoft office, silverlight, and orders of partition.
I mean a DVd that includes all this thing needed, just to facilitate the installation of the necessary things in a single step (unattended).
and use this dvd directly in the client computer to install all these things at once. a dvd that includes every thing and use it to install directly from the client computer. (a single computer)
What tool I need exactly to achieve this goal, is the tool WAIK is the right one, or I need nested tool?
Thank you
Johan
See the following topics:
-
Pavilion 15ab202tx: why I can not install hp pavilion 15 ab202tx driver for windows 7 64 bit
why I can't install hp pavilion 15 ab202tx driver for windows 7 64 bit. For the most part not completed the pilot usb and network for
LAN & Wlan.
HP has posted only Windows 10 drivers for this model. @Paul_Tikkanen we can help to find the drivers for Windows 7?
-
Why windows xp 32-bit supports only 3.25 GB of ram?
Why windows xp 32-bit supports only 3.25 GB of ram?
Tehre is no solution for this problem, and I don't want to install xp 64-bit,
coz its not user frndly, thank you
My apologies, I must have misread the topics when I did my first answer. For some reason, I got it in my head, whether you use Windows 7 32 bit.
I stand by my original comments well that although I appreciated now that you are referring to Windows XP.
If you want to go to 64-bit Windows XP I'm not sure if this is even possible now. Unless you buy a commercial version second hand. If you can, make sure that it comes with an installation CD.
To check the compatibility 64 bit XP the following may be useful...
http://support.Microsoft.com/kb/896456
http://support.Microsoft.com/ph/8599
It will be even more important to check the hardware/software compatibility via the websites of the manufacturers.
Tricky
-
original title: why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?
Why can´t I do my AGFA SNAPSCAN 1212U scanner working properly, my windows vista 32 bit, when it say installation was done correctly and ready for use. ! ?
Hi Søren benaceur
You have compatible installed the drivers for the scanner working properly?There don't seem to be compatible drivers available for the scanner to work with windows vista. I suggest you try to install drivers available for windows XP in compatibility mode on Windows Vista and verification.
http://static.Agfa.com/digicam_scanner_drivers/scanner/snapscan_1212u/index.html
So to work around the problem, try to install the drivers for Windows XP in Windows Vista compatibility mode and check if you are able to solve the problem. Compatibility mode may or may not work depending on the specifications of the device.
Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tabYou can check the link for assistance on compatibility mode - mentioned below
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsIf the problem persists while you can contact the manufacturer for assistance without a driver, the device may not work properly. Also, pilots can only be provided by the manufacturer of the device.
I hope this helps.
-
Why my windows 7 64 bit is not in support of my USB connected brodband modam UTSTAR UT300R2U, if you have drivers please send the link
Help, please
If there is no driver, your ISP will have them, NOT Microsoft. Contact your ISP...
OR...
You have not need drivers, if you are using the RJ45 connection. Unplug the USB cable and attach a RJ45 patch canble between the modem and your computer.
The computer must connect after doing this
-
Why illustrator cc 2015 went extremely slow after the last update?
Why illustrator cc 2015 went extremely slow after the last update? Someone knows how to fix this?
Envoy! Thank you
preferences to reset/delete the AI seems OK for now
-
Windows Vista 64 bit does not install last version of iTunes
I just updated my iPhone, the recent phone must have the latest version of iTunes installed, I currently have 12.3 but I'm unable to download the latest version, I have Windows Vista 64-bit on my desktop, can anyone help?
I don't think that Vista will support the latest version of iTunes, which is necessary for the latest version of iOS. I will check something quick and get back to you. What iPhone do you have? What happens when you try to download the latest version?
-
Why windows 7 (64 bit) download does not work for a hp officejet 5610 all-in-one?
I changed operating systems from XP to Windows 7 (64 bit) on a new Toshiba Portege laptop and downloaded the new drivers from the HP site for my all-in-one Officejet 5610. Nothing went well. I can print but not scan, and often copy is extremely slow for no apparent reason.
I deleted the driver downloaded several times and re-uploaded to start from scratch, but get the message "Fatal error during installation." I used HP correction for this, did everything it says and ran the download as an administrator. When the "USB connection" screen, I connect the USB as requested, and I hear my computer accepts this connection. But the HP installer does not accept or acknowledge inserting the USB key. It hangs at that time here, and keeps installation disc FOREVER chasing the USB connect screen.
When I open the HP Solution Center, he informs me that he cannot work because the download of device is not complete.
There is no file 'help' in the menu 'start '.
I'm running out of ideas on how to make my printer work properly with the new Windows 7 system.
Someone at - it suggestions?
In the case where you hear the ding that the USB cable is connected and that the software does not recognize it, it means that at any given time you connected to the computer via the USB port before running the software. When you do so, Windows takes over and tries to install their own drivers. That causes problems later, when you try to use the software, as it will then not connect when you use the USB cable.
In this case, you must connect via the usb port and go into Device Manager and remove everything related to your printer. After you do this, unplug the USB cable and restart your computer. When starting BACK, run the software FIRST and then when he asks the USB cord this time, it should recognize the connection.
-
Windows 7 64-bit random screen freezes why
My windows 7 64-bit OS has been working fine since August 2010, but since April 11, 2011 the screen freezes intermittent and do a reset to restart my PC
I also had the error message GfxUI not working not in the same time but corrected this by disabling the Microsoft.NET Framework 3.5.1 and then reactivation
Hello
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
Why Microsoft FSX crash under Windows 7 64-bit?
Bought a shiny new Dell XPS with core i7, 8 GB RAM Windows 7 64 bit and I thought that I have now would govern the sky, but not so! FSX crashes just with the introduction screen. Unrecoverable error, the information collected a million times and it not there no help anywhere!
Hi Edifalos,
I suggest you try the steps in the order in which they are presented from the link below
Game hangs or quits unexpectedly
http://support.Microsoft.com/kb/303032
If you still have questions get FSX for work, so I suggest you to visit the Flight Simulator and games for Windows Forum forum to see if they have any suggestions on this subject.
http://forums.gamesforwindows.com /.
http://support.Microsoft.com/GP/cp_flightsim_master#TAB4
Hope this information is useful.
Maybe you are looking for
-
My homepage a caps inside and Firefox guard return to non-caps.
My home page is a case-sensitive system. FIrefox keeps affecting upper non-caps. How can I fix it so Firefox load my homepage correctly?
-
My Envy 17 - 3xxx (3D) has a 80 GB SSD as boot/OS drive and a 1 TB HARD drive as secondary. I would replace the 80 GB SSD with a 500 GB new and faster SSD. I cloned the SSD existing to the new device, all good. However, I * physically cant just fin
-
How to create a status column in the table
Hello everyone I am trying to create a column of the table status in frontview Panel. I enclose a picture with her to say clearly what I say.plz tell me how to create the active status column in the table. I want to show green for safety stock and re
-
What * exactly *, did a factory reset?
My Thinkpad T430, less than a year, is having issues - corrupted .dll files, Windows Update does not, all kinds of fun stuff. I'm waiting on someone to e-mail me own copy of the dll I need BUT I'm worried that this will not solve everything, especial
-
Original title: Rundll error help As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?