Why is it I can't update a table of contents in Windows InDesign CS 5.5?

Similar Questions

• Can I update to 10 32-bit of Windows if I run Windows 7Pro 64-bit?

  I trust currently some fairly old legacy 16-bit software and I can run on 7 Pro x 64 with XPMode - a bit of a pain, but it is essential software, so I do what I do...

  I had someone test install and it works on their Windows 10... they have x 64 processor and run x 86 windows 10... other than having to change the default installation locations, it works very well.

  My question is, if I have a 64-bit version of Windows 7 Pro installed on my laptop, when I'll update Windows 10, can I choose to install a 32-bit version?  And if I can't, will x 64 run 16-bit software?

  Help!

  Can I update to 10 32-bit of Windows if I run Windows 7Pro 64-bit?

  No, at least not directly.  To do this (to change your number of bits), you need to wipe your drive and reinstall the new type-bit Windows you want.  But you also have to do the upgrade directly from Windows 7, if you want Windows 10 to be free.  So, here's what to do:

  1. be sure to save all the files you want to keep and have your ready installers for your additional programs, you'll want to install again.

  2 - pass from 7 to 10.  You will stay on 64-bit.

  3 activate Windows so that he knows that this computer is allowed for the 10 free.

  4 - Download the Windows 10 Installer to a port USB or CD and use it to clean install 10 Windows (32 bit this time)

  Another option would be to retain the 64-bit, but start your 16-bit on a Hyper-v virtual machine software.  Best of both worlds and you will have to use more memory since 64-bit allows you to use more than about 3 GB of RAM.

• can not update software adobe reader IX error windows do not have sufficient rights to modify the file

  can not update software adobe reader IX error windows do not have sufficient rights to modify the file

  Hi janl35265451,

  Make sure that you are connected with the Admin account to install the updates.

  Open the drive, go to the Help menu & "Check for the Updates.

  Kind regards
  Nicos

• Update the table of contents, errors in bookmarks

  When I update my table of contenst, it creates errors in my favorites. I have a hierarchy of level three with my titles of paragraph in my table of contents. When I update the table of contents, it takes the last item in my lowest level and a level higher than it is actually.

  Any ideas of what is happening and how can I fix?

  OK, thanks to your last message, I began to explore the Table of contents dialog box and understood what the problem was. It had to do with the levels that I had assigned to the table of content items, which I was incompatible. Now I have the right levels assigned to the table of content items and it updated bookmarks perfectly!

  Thanks for your help.

• Text disappears by updating the table of contents

  I work with documents several pages that have been created by someone else in CS3 and then I convert it into CS5. Several times when I tried to update the table of contents, all text in the document disappears. All the objects to hold their positions and nothing else changes except that there is no visible text. I checked the table of contents style settings and can find no difference between a document that updates correctly and which don't. Around her, the only way is to copy and paste the content into a new document. This does not happen with all documents, only about 30%.

  Text disappearing when you update a table of contents is usually a symtom of havint put the table of contents in the main story line. The table of contents must be in a separate story, no wire to anything, because the update replaces the whole story.

• How can I generate a table of contents of bookmarks

  How can I generate a Table of contents of bookmarks in Adobe Acrobat XI?

  Something to try.

  Rick Bostein provided an Action of Acrobat "report bookmark".
  With this report in PDF format you can insert at the beginning of your PDF document to serve as a "TOC".

  Go here:

  https://acrobatusers.com/actions-Exchange

  Scroll a few.

  Be well...

• Why is it I can't update my apps?

  I have some problems with the store in my windows 8. -When I tried to update all my apps but always fails and show the code: 0x8020002b. -The store could not show image automatically. -I can't find a few apps in the store, but I think it's available in my country. He doesn't let me confuse. Thank you...

  Hi Ade.

  Thanks for choosing Windows 8 and welcome to the Community Forums of Microsoft.

  According to the description provided, you can't update Windows Store apps.

  1. did you of recent changes to the computer?

  I would like you to follow these methods for windows store app associated question and check.

  Method 1:
  Step 1:
  Run app troubleshooting utility

  
  I suggest you to download and run the troubleshooter modern UI App. Here is the link for your reference.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  
  You can go through the link and follow the steps. Here is the link for your reference.

  What to do if you have problems with a soft

  
  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 2:

  
  Clear the cache of the Windows store

  Please follow the steps below.

  (a) press "Windows + R" key on the keyboard to open the run window.
  (b) in the type of window, run "wsreset.exe" and then click ok, it will clear all hide all Windows store.

  Method 3:
  Turn off the proxy connection

  
  If you use a proxy connection, and then follow the steps to disable the proxy:

  a. click on the gear box in the upper right corner in Internet Explorer.
  b. click on tools and then click Internet Options.
  c. click on the Connections tab, then click LAN settings.
  d. uncheck the use a proxy server for your LAN box.
  e. click Ok.

  Method 4:
  Disable the third-party antivirus software

  
  I suggest you to disable the third-party antivirus software and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 5:

  I suggest go to the link and follow the steps. Here is the link for your reference.

  Why can't find or install the application on the Windows Store?

  
  http://Windows.Microsoft.com/en-us/Windows-8/why-find-install-app-Windows-store

  I hope this helps.

  If the problem with the store Windows or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Background Intelligent Transfer Service does not work, I can not update and I've produced keyfor Windows Media edition, but not CD!

  I can't update my laptop that my uncle gave me, I tried from LITTLE, but I get "error 2: the system cannot find the specified file" and it's one of the problems I have among others, so I decided just to reinstall Windows xp media edition BUT I n 'T HAVE THE CD! but I don't have my product keys until I do? Please don't say I have to buy a CD? I already tried Windows Update (but he fails), Trouble shooting, renaming bat and download of updates from my desktop but they always failure I go to Windows update to see which updates, I need and well it's like update 49 need then I reinstall just enough, if that's possible with a CD?

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  CF. http://michaelstevenstech.com/cleanxpinstall.html#steps

  TIP: There may be a hidden partition restore (not to be confused with the restoration of the system) you can use to reinstall Windows XP.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I update this table with values from another table?

  Hello
  
  I have a table 'governed '. I want to replace the values in the column "regies.agent" by the value of the column "regies_personnes.id."
  As you can see the tables have a column of common values. IE regies.agent = regies_personnes.nom
  
  Table 'governed ':
  Insert into 'authorities' (AGENT) values ('Humberdot Alain");
  Insert into 'authorities' (AGENT) values ("Danard Patrick");
  
  Table 'regies_personnes ':
  Insert into REGIES_PERSONNES (NAME, ID) values ("Humberdot Alain", 1);
  Insert into REGIES_PERSONNES (NAME, ID) values ("Danard Patrick", 2);
  
  Before having it
  SQL > select agent of authorities;
  Humberdot Alain
  Patrick Danard
  
  After the update, the result should be
  SQL > select agent of authorities;
  1
  2
  
  Thank you for your kind reply.

  You can

  update regies r set agent = (select id from regies_persones p where r.agent = p.nom)
    where exists (select id from regies_persones p where r.agent = p.nom)
  

• How can I delete a table of contents?

  I made mistake he follow the instructions on adding a table of contents to my document and now it is totally fucked up the whole 350 pages of the document.

  Yes, it seems to be screwed in the document and it doesn't seem to be an obvious way to get rid of him. I'm deleting it and it simply re - appear elsewhere.

  How can I delete, UN - do, the KNOCK out of there?

  Select the text that is the table of contents and delete. Then make a copy of the file on the case where next steps remove all.

  Try to create a new table of contents and the do not pass to the existing text. This might work, maybe not.

  From my experience if you cut the picture containing a table of contents and paste back into the document, it loses its special TOC property that allows it to be updated, so that would be another option to try.

• Update the table of contents [JS, CS3]

  Hi all

  In the InDesign interface, you can select your table of contents and simply click on the TOC of layout update page to update.  Is this possible with a script or what I need to recreate table of contents by using the document.createTOC () method?  It's that I don't see in the object model.

  I have a book with 33 chapters, and each has its own table of contents.  All tables have been set up, I just need to be updated so that they have the correct page number.

  Thank you

  Mike

  You looked in the right place, but may have overlooked this:

  CreateTOC history painting (using the: TOCStyle [, replacing: boolean = false] [, fromBook:Book] [, included: table of number] [, includeOverset:bool = false] [, destinationLayer: Layer])

  ...
  replacement (bool) If true, replaces the existing table of contents. (Optional) (default: false)

  Sounds like you just need to add is

  document.createTOC ([your table of contents style], true);

• How can I display the table of contents for the iPod Touch to 6

  When I opened first of all iPod Touch Users' Guide, I used the table of contents (TOC) to locate and access sections in the manual. But, after looking through the manual for awhile, I tried to return to the table of contents, but it wasn't there! I have tried various things to see if the table of contents are being hidden, or if in some way, it has been deleted. Anyone can shed light on this mysterious event?

  What is the version of iBooks that you speak? There is an online version here: https://help.apple.com/ipod-touch/9/ Aha, I see the table of contents on the left disappears if you zoom before or make the narrow window and reappears if zoom you out or make it larger.

  TT2

• Update multiple tables of contents in the same doc...

  Hello

  Here is the code I tried to write:

  myDoc var = app.activeDocument;

  var myTocStyles = myDoc.tocStyles;

  var myTocNumber = myTocStyles.length;

  for (i = myTocNumber.length; i > = 1; i ++) {}

  myDoc.createTOC (TOCStyle [i], true);

  }

  Of course, it does not work!

  What I'll try (want) to do is updated all the tables of contents in the doc.

  Thank you for your wise ideas!

  You are nearby.

  Check your syntax "for".

  for (var i = 0; i)

  myDoc.createTOC (myTocStyles [i], true);

  }

• Update the table of contents (Cp7)

  Hi all

  I found that when I try to uncheck the slides that I don't want to not show in the table of contents (about 190 slides in the 200 in a project) Captivate crashes with a fatal mistake and I lose any unsaved work.  I had to uncheck about 10 boxes at a time, close the table of contents and save but it is very time consuming.  Is there a way to uncheck all of the slides by default and select just those I want to appear?  Y at - it a fix for the bug fatal error?

  Thank you

  Cindy

  Hello

  Welcome to the Adobe Forums.

  Make sure you have you CP 7.0.1 update installed

  You're on MAC or Windows?

  It happens with a specific project or a sample as well

  Any similarity between the slides that you do not want to display in the Table of contents?

  Thank you

  Vikram

  Adobe support

• How can I customize the Table of contents develop (> >) button?

  I have a client who wants to change the color of the table of contents, expand (> >) button which is a light gray by default. I tried to change all the options in the editor of skin under the Table of contents, playback control and borders, and nothing worked. Am I missing something obvious, or is there no way to customize this button?

  Thanks in advance!

  Hello

  You will not be able to change the color of the expand button, but you can add your own custom images.

  (1) launch the Adobe Captivate 5.5 project

  2) click on the project-> Table of contents

  3) click on the set button

  (4) under TOC settings, you have the icon sections expand and collapse icon

  5) click on 'file' button and find your photo

  Screenshot:

  

  That's what your output will look like:

  

  Hope this helps!

  Thank you

  Vikram