Why is my current residence incorrect?

Similar Questions

• Why is the nVidia patch incorrectly installs on our VGC-RC310G?

  Why is the nVidia patch incorrectly installs on our VGC RC310? Media Center makes the black screen again.

  Maybe it's good now... I installed the patch to the nVidia site and then reinstalled the Vaio patch, and this time, the facility has been good. Media Center TV works well and I'm an old grandmother happy again. : )

• Why Windows 7 displays an incorrect amount of free disk space / used on my DVD - RW drive?

  Why Windows 7 displays an incorrect amount of free disk space / used on my DVD - RW drive?

  Windows 7 can show the incorrect amount of free and used space in serious DVD - RW or DVD + RW media properties.  After burning data on the disk, Windows 7 could show that there are 0 bytes of used space and free space available on the disk capacity.  In reality, the amount of used and free space on the disk is reversed.

• Why control 'Reload current page' has been moved to the navigation bar 29 Firefox? I wish I could put it where I had it in Firefox 28.

  After completing the download of Firefox 29 I tried to reorganize my buttons\controls to where I used to have them in Firefox 28 and earlier versions. I noticed, in particular, that the 'reload current page' control is no longer available to be located in front of the navigation bar where I got it for years. The reason why I chose Firefox was in the first place because I could customize to my liking. I know that you can just right click and "Recharge" tab or just get used to go all the way (right side) of the bar of navigation but that defeats the purpose entirely for me.

  Here's an analogy; Ford decides that they will replace now current car models to the United States with British standard style vehicles. All cars sold by Ford will now be right steer. While this may seem like a "No biggy" to some, others, especially those of us who are prone to driving manual transmission vehicle, maybe a little resistant to this change. You do not know if I managed to make my point of view or not, but I hope that I did.

  Initially I thought I would start by "is someone fell and hit their head?" or "did Steve Ballmer suddenly support Mozilla, especially the version of Firefox 29, because it feels like a Windows 8 (aka the aroma of a tank full of sewage on a hot day)?" It is understood that updates are needed and as a computer scientist, I was around for many odd where the folds just to settle. They occur. Perhaps some consideration will be Firefox 30 to those of us in States that are used for vehicles left direction.

  I may be missing something here and fall on my sword if this is the case, but there is no indication that I've seen at the sight of Mozilla that the 'reload current page' control cannot be manipulated somehow update Firefox 29. The good side of things, I now have a good reason to go back and review some of the browsers that I cut back in the day when I decided to go with Firefox.

  As far as I know, the Restorer of classic theme Add on is the only way to move the button reload outside the address bar.

  1. Classic restaurateur theme installation and restart Firefox when prompted.
  2. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  3. Beside the classical restaurant theme, click on the Options button.
  4. On the main tab, make sure that 'Mobile back-forward button' and 'hide urlbars stop & reload buttons' is checked. You can also check "combine stop & reload buttons. Close the options window when finished.
  5. Right-click on a zone empty of the tab bar and select Customize.
  6. Do slide forward/backward buttons, Stop and reload on the navigation toolbar.
  7. Click the Customize the output at the bottom right button when finished.

  That being said, I must point out that you can reload pages in other ways.

  • Make a right click No matter what tab and choose reload.
  • Right click on a box empty page and choose reload.
  • Press F5.
  • Press Ctrl + R (Mac: command-R).

• Place of current residence Apple Watch weather

  Hi all

  something is happening with my Apple Watch and weather.

  I can't get the weather from the current location on my watch. current place of residence is enabled on my iPhone and I can't see properly on the native phone application.

  However, I can't even on the watch. The current location is also enabled on the weather app of the watch, but I see only the predefined locations.

  I read a bit here and I have tried all the solutions posted as to restart the phone, delete predefined places, etc. but nothing seems to work.

  any idea?

  Hello

  The following steps may help:

  • On your iPhone, go to: settings > privacy > location Services:
    • Ensure that the location service is enabled.
    • Sure Apple Watch is face value while it helps.
    • Check the weather is set to always.
  • On your iPhone, go to: settings > general > background App update:
    • Check that the bottom App Refresh is enabled.
    • It can also help to activate the setting for the weather.

• keep the current residents of cell - Report Generation Toolkit

  I have a model in excel and I use the Table.vi easy Excel in order to write an array of strings in the report. The question, I'm running is, because it is a model, I already have residents formatted as I want in Excel, but when I write the table it does not keep residents. Is it possible that I can either:

  1. get boarder formatting then set the formatting to that

  2. stop in the first place development forms the border

  

  If the thread that the above does not quite give me the answer, but he point me in the right direction. I found the table threaded in Report VI and it opened. If you dig down you will find the Excel_Insert_Table.vi. I used this and the value "Show gridlines" false. Supports the problem.

• Why my computer is insert incorrect symbols?

  When I go to insert the citation of my computer brands inserts the symbol @ instead. It is one of the easier to explain replacements. If someone can tell me why or how there to remedy, I'd be much aprecciated. also, I think that it is perhaps something to do with the new microsoft office program I installed.

  Yes on the side in the bottom right of the computer screen to two letters indicating the language in which is pre-set at the time. the exchange of the symbol may be because you have NumLock

• Place of current residence (Longitude/Latitude) GPS does not work on real device

  Hello

  I wrote a small test application for GPS/latidue longitude. It works fine on simulator (9630), but not on the real device (BlackBerry Tour). Am I missing something? I have to set anything on the device? I already have the data plan activated in the device. Should I have any extra service from the supplier in order to let this GPS thing work?

  Here's my test code:

  public class GPSDemoScreen extends MainScreen implements FieldChangeListener{
      private ButtonField btnGPSTest;
      private EditField edStatus;    
  
      private BBTest bbTest = null;
      private VerticalFieldManager vfManager = null;
  
        // Constants -----------------------------------------------------------------------------------------------------------------
      private static final int GRADE_INTERVAL=5;  // Seconds - represents the number of updates over which alt is calculated.
   //   private static final long ID = 0x5d459971bb15ae7aL; //com.rim.samples.device.gpsdemo.GPSDemo.ID
      private static final int CAPTURE_INTERVAL=5;    // We record a location every 5 seconds.
      private static final int SENDING_INTERVAL=30;   // The interval in seconds after which the information is sent to the server.
  
      // When running this application, select options from the menu and replace 
      // with the name of the computer which is running the GPSServer application found in
      // com.rim.samples.server, typically the local machine.  Alternatively, the _hostName variable
      // can be hard-coded below with no need to further modify the server name while running the application.
  
      private static int _interval = 1;   // Seconds - this is the period of position query.
      private static float[] _altitudes;
      private static float[] _horizontalDistances;
  
       private long _startTime;
      private float _wayHorizontalDistance;
      private float _horizontalDistance;
      private float _verticalDistance;
      private StringBuffer _messageString;
      private LocationProvider _locationProvider;
      //private ServerConnectThread _serverConnectThread;   
  
      /** Creates a new instance of GPSDemoScreen */
      public GPSDemoScreen(BBTest bbtest) {
          super(DEFAULT_MENU | DEFAULT_CLOSE);
          bbTest = bbtest;
  
          initComponent();
      }
  
      private void initComponent(){
          this.setTitle("GPS Demo");
       //   this.bbTest.setBGImage(vfManager, this);
          // Used by waypoints, represents the time since the last waypoint.
          _startTime = System.currentTimeMillis();
          _altitudes = new float[GRADE_INTERVAL];
          _horizontalDistances = new float[GRADE_INTERVAL];
          _messageString = new StringBuffer();
  
          btnGPSTest = new ButtonField("GPS Test", ButtonField.CONSUME_CLICK);
          btnGPSTest.setChangeListener(this);
          edStatus = new EditField( Field.NON_FOCUSABLE);
          edStatus.setText("retriving Longitude and Latitude.Please wait..");
          this.add(btnGPSTest);
          this.add(edStatus);
  
      }
  
       /**
       * Rounds off a given double to the provided number of decimal places.
       * @param d The double to round off.
       * @param decimal The number of decimal places to retain.
       * @return A double with the number of decimal places specified.
       */
      private static double round(double d, int decimal)
      {
          double powerOfTen = 1;
  
          while (decimal-- > 0)
          {
              powerOfTen *= 10.0;
          }
  
          double d1 = d * powerOfTen;
          int d1asint = (int)d1; // Clip the decimal portion away and cache the cast, this is a costly transformation.
          double d2 = d1 - d1asint; // Get the remainder of the double.
  
          // Is the remainder > 0.5? if so, round up, otherwise round down (lump in .5 with > case for simplicity).
          return ( d2 >= 0.5 ? (d1asint + 1)/powerOfTen : (d1asint)/powerOfTen);
      }
  
       /**
       * Invokes the Location API with the default criteria.
       *
       * @return True if the Location Provider was successfully started; false otherwise.
       */
      private boolean startLocationUpdate()
      {
          boolean retval = false;
  
          try
          {
              _locationProvider = LocationProvider.getInstance(null);
  
              if ( _locationProvider == null )
              {
                  // We would like to display a dialog box indicating that GPS isn't supported,
                  // but because the event-dispatcher thread hasn't been started yet, modal
                  // screens cannot be pushed onto the display stack.  So delay this operation
                  // until the event-dispatcher thread is running by asking it to invoke the
                  // following Runnable object as soon as it can.
                  Runnable showGpsUnsupportedDialog = new Runnable()
                  {
                      public void run() {
                          Dialog.alert("GPS is not supported on this platform, exiting...");
                          System.exit( 1 );
                      }
                  };
  
                  UiApplication.getApplication().invokeLater( showGpsUnsupportedDialog );  // Ask event-dispatcher thread to display dialog ASAP.
              }
              else
              {
                  // Only a single listener can be associated with a provider, and unsetting it
                  // involves the same call but with null, therefore, no need to cache the listener
                  // instance request an update every second.
                  _locationProvider.setLocationListener(new LocationListenerImpl(), _interval, 1, 1);
                  retval = true;
              }
          }
          catch (LocationException le)
          {
              System.err.println("Failed to instantiate the LocationProvider object, exiting...");
              System.err.println(le);
              System.exit(0);
          }
          return retval;
      }
        /**
       * Update the GUI with the data just received.
       */
      private void updateLocationScreen(final String msg)
      {
          UiApplication.getApplication().invokeLater(new Runnable()
          {
              public void run()
              {
                  System.out.println(msg.toString());
                  edStatus.setText(msg);
                  Dialog.alert(msg.toString());
              }
          });
      }
  
    public void fieldChanged(Field field, int context){
           if(field.equals(btnGPSTest)){
              startLocationUpdate();
           }
  
       }
      /** Standard Escape-key handler */
      public boolean keyChar(char key, int status, int time) {
          boolean retval = false;
          switch (key) {
              case Characters.ESCAPE:
                 // UiApplication.getUiApplication().popScreen(UiApplication.getUiApplication().getActiveScreen());
                  break;
              default:
                  retval = super.keyChar(key, status, time);
          }
          return retval;
      }
  
       /**
       * Implementation of the LocationListener interface.
       */
      private class LocationListenerImpl implements LocationListener
      {
          // Members ----------------------------------------------------------------------------------------------
          private int captureCount;
          private int sendCount;
  
          // Methods ----------------------------------------------------------------------------------------------
          /**
           * @see javax.microedition.location.LocationListener#locationUpdated(LocationProvider,Location)
           */
          public void locationUpdated(LocationProvider provider, Location location)
          {
              try{
                  if(location.isValid())
                  {
                      float heading = location.getCourse();
                      double longitude = location.getQualifiedCoordinates().getLongitude();
                      double latitude = location.getQualifiedCoordinates().getLatitude();
                      float altitude = location.getQualifiedCoordinates().getAltitude();
                      float speed = location.getSpeed();                
  
                      // Horizontal distance to send to server.
                      float horizontalDistance = speed * _interval;
                      _horizontalDistance += horizontalDistance;
  
                      // Horizontal distance for this waypoint.
                      _wayHorizontalDistance += horizontalDistance;
  
                      // Distance over the current interval.
                      float totalDist = 0; 
  
                      // Moving average grade.
                      for(int i = 0; i < GRADE_INTERVAL - 1; ++i)
                      {
                          _altitudes[i] = _altitudes[i+1];
                          _horizontalDistances[i] = _horizontalDistances[i+1];
                          totalDist = totalDist + _horizontalDistances[i];
                      }
  
                      _altitudes[GRADE_INTERVAL-1] = altitude;
                      _horizontalDistances[GRADE_INTERVAL-1] = speed*_interval;
                      totalDist= totalDist + _horizontalDistances[GRADE_INTERVAL-1];
                      float grade = (totalDist==0.0F)? Float.NaN : ( (_altitudes[4] - _altitudes[0]) * 100/totalDist);
  
                      // Running total of the vertical distance gain.
                      float altGain = _altitudes[GRADE_INTERVAL-1] - _altitudes[GRADE_INTERVAL-2];
  
                      if (altGain > 0)
                      {
                          _verticalDistance = _verticalDistance + altGain;
                      }
  
                      captureCount += _interval;
  
                      // If we're mod zero then it's time to record this data.
                      captureCount %= CAPTURE_INTERVAL;
  
                      // Information to be sent to the server.
                      if ( captureCount == 0 )
                      {
                          // Minimize garbage creation by appending only character primitives, no extra String objects created that way.
                          _messageString.append(round(longitude,4));
                          _messageString.append(';');
                          _messageString.append(round(latitude,4));
                          _messageString.append(';');
                          _messageString.append(round(altitude,2));
                          _messageString.append(';');
                          _messageString.append(_horizontalDistance);
                          _messageString.append(';');
                          _messageString.append(round(speed,2));
                          _messageString.append(';');
                          _messageString.append(System.currentTimeMillis());
                          _messageString.append(':');
                          sendCount += CAPTURE_INTERVAL;
                          _horizontalDistance = 0;
                      }
  
                      // If we're mod zero then it's time to send.
                      sendCount %= SENDING_INTERVAL;
  
                      synchronized(this)
                      {
                          if (sendCount == 0 && _messageString.length() != 0)
                          {
                          //  _serverConnectThread.sendUpdate(_messageString.toString());
                              _messageString.setLength(0);
                          }
                      }
  
                      // Information to be displayed on the device.
                      StringBuffer sb = new StringBuffer();
                      sb.append("Longitude: ");
                      sb.append(longitude);
                      sb.append("\n");
                      sb.append("Latitude: ");
                      sb.append(latitude);
                      sb.append("\n");
                      sb.append("Altitude: ");
                      sb.append(altitude);
                      sb.append(" m");
                      sb.append("\n");
                      sb.append("Heading relative to true north: ");
                      sb.append(heading);
                      sb.append("\n");
                      sb.append("Speed : ");
                      sb.append(speed);
                      sb.append(" m/s");
                      sb.append("\n");
                      sb.append("Grade : ");
                      if(Float.isNaN(grade))sb.append(" Not available");
                      else sb.append(grade+" %");
                      GPSDemoScreen.this.updateLocationScreen(sb.toString());
                  }
              }catch(Exception ex){
                  System.out.println(ex.toString());
                  ex.printStackTrace();
              }
          }
  
          public void providerStateChanged(LocationProvider provider, int newState)
          {
              // Not implemented.
          }
      }
  }
  

  It works fine now, when I tried door.

• Date and time current field incorrect when in the browser

  When displaying a PDF file in a browser, tried Chrome and Firefox, the time and the date that is entered in the field time now seems to be the last date the form has been saved. But when the form is downloaded, the date and time are entered correctly. I tried clearing history & cache, but still not the wrong time.

  Firefox and Chrome have built-in PDF viewers. Does not support the JavaScript that uses the form for auto-ensemble the time, but because of Reader/Acrobat, this is why it does not work when download you and open it in Reader/Acrobat.

• Why do I get an incorrect WEP key during the installation of my printer?

  Product - specific document

  http://support.HP.com/us-en/document/c00772798

  I worked for HP.

  This work also (well) with the J6480 printer.  I was using a Linksys router Wireless 'G' which creates 4 WEP keys, allowing you to choose which use.  I sent #2 key and it would not accept.  The only way I could make it work was to disable wireless security, is not my idea of a good option.  After numerious emails and 1 appeal to support with no ideas that I decided to seek out here and finally managed to do accept the WEP key.  I ended up completely uninstall/reinstall to get everything to work 100%, but now it works like a charm.  For those of you with a similar problem, when using a router that generates more than 1 WEP key, try using (sending) key #1

  HP Note: your support by e-mail/voice should be as good as your online forum support

  Thanks to DaniW-now I'm a happy camper

• Why is the current version of Firefox on my laptop 6.0 and my office worm. 3.6.20?

  Not a problem, just curious.

  No he is not separated for laptops and desktop computers.

  Just Mozilla has not yet turned on 3.6 to 6.0 update notifications. I don't even get this possibility today (and for the last few days) when I manually "Check for Updates" on 3.6.18 / 20 in the Help menu. It is difficult to update everyone using all versions of Firefox in a single day or even over several days, there is only so much available bandwidth.

• Why ApplicationMgr.ExecutionClosed event returns incorrect object

  Work with the operator of Labview interface.

  I'm trying to get the event during the sequence file is closed.

  I created two reminders to the ApplicationMgr.ExecutionClosed and ApplicationMgr.SequenceFileClosing events.

  According to aid TS first callback returns execution and second reminder returns SequenceFiile.

  Two reminders are created automatically Labview and have only the argument of the API to pass to the event handler.

  The two event handlers in Labview, I use the nodes property to get the IDS of the objects (execution and file)...

  The two nodes of property give errors #1 with reason: property node has wrong argument 1 (reference object as I undertand).

  When I use varianr conversion I discovered non-empty reference in the event parameter.

  It's very like as return value EntryPoint.Run method for execution and OpenSequenceFile for ApplicationMgr.

  What can be wrong?

  Something happened to the memory or this behavior is the result of my bad actions?

  Hello, Taylor

  Thanks for the reply.

  Today, I have solved this problem.

  The reason was lack of understanding event management in Labview.

  I have passed reference sequence VI of the LV event handler callback file and then tried to recover file ID loop event LV and close the reference.

  In this way was wrong

  File reference here is bad.

  After that I changed to get the ID of file directly in the VI recall I have normal work.

• Why my sensitive layouts change incorrectly?

  

  I'm trying to create a sensitive site. Screenshot on the left shows the layout for 600 breakpoint. Except for the two main bands of color have been marked as stretch to the width of the browser and all elements were pinned as centre and marked 'no '.

  Before moving to 960 point break, the elements have been re-arranged pin and registered under the previous name. But on his return to the point of breaking 600 items were as shown on the right.

  To my knowledge of the process and of what I observed in the excellent tutorial of the Mz Beaumont that the elements are fixed in their position at the 1200 breakpoint then the scrubber is to the left and elements re - arrange for this point of view screen...

  I followed this process, but it doesn't seem to be a step that sets the particular provision at a moment of rupture.  Any ideas please.

  I am also attaching the views of breakpoint 960 and 1200.

  Hi William,.

  After investigating your .muse file, I found that you've designed your introduction to phone on the page master of itself, but your site isn't a unique layout, you should design the presentation of the phone in the menu instead of master pages, please try it and let me know if it works for you.

  Kind regards

  Ankush Rao

• Why do I get an incorrect result for my Pl/SQL procedure?

  Hello, I just try to figure out % limpCount consists of playercount
  The result is always 100 even if limpcount and playercount are correct when it is printed.
  
  CREATE OR REPLACE PROCEDURE workoutVPIPProc
  IS
  nrplayersV_PIP NUMBER (10);
  handCount NUMBER (10);
  playercount NUMBER (10);
  limpCount NUMBER (10);
  Temp NUMBER (10);
  BEGIN
  SELECT count (nlhm_hands. NLHM_hand_number) IN handCount OF nlhm_hands;
  SELECT sum (nlhm_hands. NLHM_no_players_involved) IN nlhm_hands playercount;
  SELECT sum (nlhm_hands. NLHM_no_players_limp) IN limpCount OF nlhm_hands;
  Temp: = limpCount/playercount;
  nrplayersV_PIP: = temp * 100;
  DBMS_OUTPUT. Put_line (' the average VPIP for NLHM is: ' | nrplayersV_PIP |) "% of the sum of players limping: ' | limpCount |': ' | playercount);
  END workoutVPIPProc;
  /

  A tip:

  SQL> select  cast(123/77 as number(10)) from dual;
  
  CAST(123/77ASNUMBER(10))
  ------------------------
                         2
  
  SQL> select  cast(123/77 as number(10,5)) from dual;
  
  CAST(123/77ASNUMBER(10,5))
  --------------------------
                      1.5974
  
  SQL> 
  

  SY.

• Why PDF with transparency displayed incorrectly?

  Hello world

  I used this script ( http://www.adobe.com/devnet/digitalpublishingsuite/articles/dps-pdf-to-indesign.html ) to create a magazine based on a PDF file, but I have a big problem.

  PDF imported with transparent elements are not properly displayed, but only in a vertical position as you can see in the pictures on the menu and horizontal display correctly.
  I don't have control of PDF files because the Publisher send it already ready.

  I used the v.22 for this publication because I can't update the application now, but I installed the latest tools DPS.

  Thanks in advance for the help.

  

  

  I know this is an old thread, but I want to answer because it'll be useful for someone looking for answers as if I was today ;-)

  This is an expected behavior for a PDF article. Articles only PDF supports transparency opacity effect and multiply, blend modes are not supported. However, the content even if it is downloaded as a PNG/JPEG article should work correctly.

  It is also documented in best practices presented here Digital Publishing Suite help | Best practices to create overlays for