Why is my HP Deskjet 855C does not? Driver is loaded

Similar Questions

• keyboard does not (driver is loading don't not with the error code 38) after upgrading to VMWare Player 6.0.6 or 7.1.0

  Hi all

  Host: DELL M3800, Windows 8.1

  Since the update to VMware Player 6.0.6 (or 7.1.0) Windows is not loaded (error code 38) keyboard drivers.

  The device HID\VID_046D & PID_C313 & MI_00\7 & 362ebef & 0 & 0000 had a starting problem. (Pilot: keyboard.inf, problem: 0 x 26).

  I had no problem with previous versions (VMware Player 6 to 6.0.4).

  If I uninstall VMWare Player, Windows correctly loading the keyboard drivers.

  Now, if I reinstall the earlier version of VMware Player, Windows does not load properly (error code 38) keyboard drivers.

  Can you help me?

  Thank you

  Guillaume

  The problem is caused by the VMkbd.sys driver.

  You can find the "best" solution for Usb keyboard problem

• Why an amplification of the RAM does not change the index performnance of windows vista?

  Why an amplification of the RAM does not change the index performnance of windows Vista?

  Hello

  I m not very well, but maybe you have more than 3 GB of RAM and Vista 32 bit.
  Usually the 32 bit OS is capable to manage and send only 3.2 GB.
  The more than 3.2 GB RAM will not operating system used and therefore would not increase the index
  In addition the laptop will be not really faster after upgrading RAM. You will notice better performance using applications at the same time, but this does not affect the index of Vista.
  But this is only my personal hypothesis.

  Welcome them

• HP Deskjet J110: 8.1 for Windows does not recognize Deskjet J110, does not print. Drive of reloads.

  DeskJet J110 does not test page print.  Removed the printer and reinstall, USb not recognized. Charges such as LPT1. Tried unplugging, reboot and reconnect. Same result.

  Hello Floadnar,

  Have you tried with another Usb cable? DC said that "usb not recognized it. You should check also Device Manager for universal serial bus drivers. Finally, you can try to connect both usb cable to check the work of regular printer usb socket or not. you don't need to install the driver. Simply connect the usb cable between the printer and PC. If both USB works with off problem that should not see the unrecognized Usb device message.

• Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  Why my windows freeze and go does not respond when I try to install the msn photo on hotmail download tool?

  The active x bar descends into the small window and freezes all windows open right there and will not respond. This happens when I open a new message and try to attach photos.

  Things I tried but has not made a difference:

  reinstalled IE 8, deleted the history of the browser, disk Cleanup, removed msn photo upload control, optimized IE8

  With xp media center

  PS. This occurs also at any time the information down to install an active x on any site control

  The only way to surf now with frustration is to use IE 8 NOT add optional

  So I fixed that on my own and that's how I did it.

  You must uninstall IE 8 completely which will bring you to IE 7 (in my case) and then install IE 8 via the site updates or microsoft.

  Uninstallin IE 8 by going to:

  Start--->

  Control Panel--->

  Add Remove programs--->

  Scroll down to IE 8--->

  Click on delete.

  IE8 updates must be removed also, if not then click the box 'To see the updates' on the top of the window to scroll down, look for the IE 8 security updates and delete.

  Resart your computer and install IE 8.

  This worked for me and may or may not work for you.

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• HP deskjet 995ck does not work on win 7

  HP deskjet 995ck does not work on win 7

  Check on the Web site of the manufacturer for an updated driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=JM&LC=en&DLC=en&softwareitem=DJ-14681-2

• USB 3.0 port select the pen drive, but does not allow to load mobile

  Hello

  I have acer Aspire V3 - 471G laptop with usb 3.0 port. In this port, it says usb charging device

  the manual also says it can charge when connected to the laptop via a usb port.

  If I insert the USB key, it allows to use, but when I connect the mobile to laptop using data cable the mobile isnot responsible... Why? Please help me... I m in prblem... I think that usb 3.0 is not damaged but not chargin... makes me using trouble.please! 11

  If the USB 3.0 port sees the other USB devices correctly, we know that the USB port works correctly.

  This does not guarantee that load power supply is working properly.

  Make sure that the cable is a charging cable.  If this does not work, you may need to contact the Department for further assistance.

• Why my deskjet 940c does not recognize my black ink cartridge?

  Please help; my HP Deskjet 940c is not recognize my black ink cartridge and tried to clean the cartridge.  I have tried almost evrything but help would be very appreciated.  I am running windows XP.

  There are a few steps to help solve this problem located here.

  If you tried to change the cartridge and clean the contacts, then you've done several of the steps already in order to answer the question.

  You can consider replacing the printer as well if the steps do not fix the issue. Have you considered the available through the Support of HPupgrade program, if the unit is out of warranty?

• DeskJet 4160 does not turn off.

  I saw the post with the same problem on an another DeskJet, but the solution was a replacement - my 4160 is out of warranty. I had the same indicators - the flashing of the button "we / off" and the "Summary" button flashing - but turn off the computer did not work for me. I unplugged the printer with the computer off and was still out of action. BTW, I also had an indication "disconnected" on the page of the HP Solutions.

  I downloaded a fix has been described as "disconnected" problem and could make the printer work (used diagnosis HP download). But I can't even turn the printer off.

  My hypothesis is that there is a fault in the wiring of the button or the internal logic chip that does not send the signal to the circuits 'power '. My 4160 is about 4 years old, but is a very good printer and I would like it to work.

  I can work this way, the use of the power to the inactive printer won't break me - but I wonder if anyone has seen this problem.

  Best, Jon

  Thanks Shlomil.

  I see by your post I'm unclear in my question (and looking at my message that I wasn't really clear). Despite this, my problem is now solved.

  I had already healed the problem "flashing lights" and got the printer from the device by unplugging the power for 20 seconds, but the problem rest not being able to turn off the printer was the source of my question. I didn't have to unplug the USB, as it seems irrelevant to the 'shut down '. BTW, I had also deleted messages waiting in lines to print on two accounts on my machine at home. It seems that disconnection of power took care of the queue, because I first tried this deletion with no result.

  I followed your suggestions and removed the USB first, then the power. I left it a full minute, then reconnected power and tested the switch panel "power" - it worked. I then reconnected the USB and re-tested, it worked.

  Can I ask the forgiveness of any future readers of this thread, as well as yourself, for details - but I don't see the logic of the complete disconnect regarding the "power switch". Maybe it was because I gave her more time, maybe it was the 'double disconnect. " There seems to be no reason for that the simple "off / on" switch would care about the USB connection, but who knows what "evil lies at the heart of a computer".

  In the introduction, I am experienced enough - although less so now these modern devices. My contacts with the computers date back to the programming of the machines IBM from 1961 and was still Assembly programming communication protocols in the 1980s. I encountered difficulties with the modern machine that is separated from the user by higher layers of level languages and operating systems developed by the committees.

  I'll make a suggestion to any future readers of this thread, always unplug the key USB (or another data link) first - then put the plug. Reverse the sequence in the re - plug, power first, and then data - and test the feature before plugging the data binding. Also go and pour coffee or get a beer, before reconnecting the power. The 10-20 seconds normally required to take down the logic circuits may not be enough. (Summer, done this hundreds of times when I was in the company).

  Finally, I'll mark this Accepted and click on congratulations (BTW, glad that's not kudo, the Greek word is not plural, something wrong understood by many sports commentators that "offer a kudo" to a player - that's the word for praise). But if someone think of a reason why it worked - that is, not the flashing lights, but the 'stuck' power button - I'd love to hear it.

  Best, Jon

• HP Deskjet 2540: Does not print correctly

  Hello!

  I was wondering if everything can perhaps help me?

  I'm in Uni and so have to print several etc test and for all these front page - but every time I try to print this cover on the printer page or amends the provision does not print. Why is this?
  The cover page looks essentially like a chart with several boxes.

  And even if there is enough paper in the printer it says exactly the opposite, I want this problem is easy to fix (remove the film and put it again), but it's starting to annoy me

  Is there something I can do?

  Thank you in advance!

  Hello @alinah,

  Welcome to the Forums of HP Support!

  I understand that you are printing problems when printing a cover sheet with your tests to your computer Windows 8.1 for the all-in-one printer HP Deskjet 2540. In addition, you have met your printer issues as well with intermittent 'in paper'. I want to help you solve these issues today.

  To be honest, the paper intermittent power issue and the cover page number can down to a problem of programming with your printer. If your "brains" of printers is corrupt in any way that the printer is not responding correctly. To make your printers programming up to date, please click here. When the site opens, select the download button at the top left. Allow the download to run. Please follow the instructions on the screen to complete the Firmware update of the programming.

  Once the update is complete test please print again. If the number of cover persists, please continue to the next step.

  Add another driver:

  It is likely that the driver for Deskjet you use is in conflict with your Windows 8.1 operating system, even if your printer is compatible with the Windows 8.1. To ensure that a driver conflict provokes questions, please follow the steps below.

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "devices and printers".
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your HP Deskjet 2540 and left-click on properties of the printer
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  11. Under the printer properties window, select "Apply", but don't hit not OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 2540
  14. Click OK
  15. Finally, right click on your HP Deskjet 2540 one more time and left-click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  18. Press apply and OK

  Once the new driver is added, please test print to see if your problem is resolved.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Deskjet 990cxi does not print color

  HP Deskjet 990cxi had for many years with no problems.  Once the color has begun to come out in pink, I replaced the cartridge from the printer and now it does not print in black and faded rose.  I replaced the cartridge with an another new and still the same results.

  Can someone help and let me know what I need to do?

  Hello LoBaan,

  Welcome to the Forums of HP Support! I see that you are not able to print in color on your HP Deskjet 990cxi, you replaced the cartridges without success. I would like that you start here: lack of color, wrong color or cast in print, follow these steps to resolve the problem you are experiencing.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP Deskjet 2540 all-in-one: HP Deskjet 2540 does not print

  I bought my printer a while ago and implemented so I could print wireless from my Mac. The other day I had to print some PDF documents and printed first, but the other two never printed. In the queue, it says "ready to print" and the two buttons wireless to the printer are turned on. It also does not print when I connect it to the USB port. But when I print the test page, which printed fine.

  Hey @bess-stanton1,.

  Welcome to the Forums of HP Support!

  I see that you have some problems with your machine printing Mac OSX 10.11 for the all-in-one printer Deskjet 2540. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Disconnect the USB cable if it is connected.
  2. Turn the printer off.
  3. While the printer is turned off, disconnect the power cable from the back of the router.
  4. When the lights come back on the router, turn on the printer.
  5. Close any programs you have open.
  6. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  7. Hold down the CTRL key and click on an icon of your printer on the left.
  8. Click on reset printing system.
  9. Click the 'more' in the lower left corner.
  10. Select your printer from the list.
  11. Click in the box next to and select your printer from the list.
  12. Click on Add.

  Please let me know if you can print after you follow the above. If you can, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.