Why is my slower than wifi ethernet download speed when using the airport extreme?

Similar Questions

• Slower speeds when using the router from Linksys e2500

  Hi all

  Today, I upgraded my internet with Rogers for his new 100u service that boasts 100 Mbps download. I brought the new home modem/router and ran a speed test which gave me a huge 130mbps dl and 10 Mbps to the top. Once I placed in bridge mode and logged my e2500 I can now reach 90mbps dl on speedtest.net (only). BTW, these tests are run on a computer connected to the router. He is not able to manage anything more than 100 Mbps? Maybe someone can enlighten us on that.

  Thank you!

  Prioritzation QoS or media is activated by any chance? Disable, restart and test again.

  Also be aware that WAN and LAN port speed are only 100 MB so may see you the limit of this model of router. Most newer generation routers and ISP modems support 1000 Mb on two ports.

• the Airport extreme, giving a slow wifi connection

  Hello

  I've got my download speed of 200 Mbps cable company. I checked a good signal by plugging directly in he back of the Modem (to remove the photo Airport extreme wifi.) ... I have 221Mbps actually...

  However, once I'm going to plug in the Airport Extreme and text my speed on wifi, I get only between 24 Mbps or max after several trials of 54 Mbps on download... I should get just under 200 Mbit/s because of the normal fall through wifi... However, not to the extreme I loss I get...

  Tuesday Apple Support has helped me to perform a reboot of the router and I have been good to get 198Mbps... It is here 2 days later and I'm back down to 24 Mbps...

  I tried to redo the reboot: unplug the unit, hold down the reset button, then while holding down the reset button, add power on and continue now stuck until it flashes yellow... But curiously, after it flashes it goes straight to the green... (never asking me to airport utility to add a password)

  My Wifi speed stink...

  What continues with this device... anyone have recommendations?

  I already proved the cable line and the modem (with the support of motorola)...

  Thank you

  Most likely you have a faulty AirPort Extreme. Please ask Apple to replace this unit for you.

  If you wish to renew a reset, follow the instructions very carefully:

  Turning off AirPort Extreme

  Wait 7 - 8 seconds

  Hold the first reset button... and hold in an additional 7 to 8 seconds while simultaneously you reconnect the power on the AirPort Extreme.

  Release the reset button to zero after the period of detention

  Allow a minute for the AirPort Extreme restart. The light will be Orange fixed for 15-20 seconds about, then turn to flashing orange slowly after about 30 seconds

  A slow amber flashing light... about once per second... confirms that the airport has been reset and you can set it up again.

• The Airport Extreme has download slow unless its an apple product

  I need help.  I have an Airport Extreme router.  I run a HP all in one office, two smart TV, Wii and two boxes on my router.  Not all work at the same time, nor do two pass at the same time.

  I check my router on Mac speed: 100 Mbit/s easy.  I check my iphone: 100 Mbps.  I checked the HP desktop computer: 30-50 Mbps.  I haven't checked the Wii, Smart TVs do not open always Netflix, my boxes go slow and buffer for long periods of time.

  There must be a setting that does not allow non-Apple products to run more slowly.  I pay 100 Mbps and expect to receive 100 Mbps on the Airport Extreme for all products, not just Apple products.

  What I could try or have I missed that should be done so all non-Apple products get the speed of download and Apple products?

  I called support and they had me change the channels in the configuration of the Airport Extreme wireless.  That did not help.  I changed them back and now the iPhone runs slower, below 50 Mbps upload when you fill out a speed test on www.speedtest.com.  I'm sitting in the same place.  It makes no sense at all.

• I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again?

  I bought windows 7 in a store, but my windows xp cannot read the dvd. can I download 7 and use the product key, rather than buy it again? I bought an old compaq desktop computer, and I want to update.

  It's probably too late because you have unsealed the package, but as you have relatively minor glitch of the material do not have a DVD player, did you use the (free) Windows 7 Upgrade Advisor to determine whether your computer hardware is capable of running Windows 7?

• Why is always faster download speed when I check the speed u switch broadband compared with BT Speedtest?

  Broad speed band

  Hello. Why is always faster download speed when I check the speed u switch broadband compared with BT Speedtest? My ISP is BT. Thank you. Brian

  Hi Brian,.
  I recommend you to get in touch with the Internet Service Provider (ISP) for more information on this issue, because the Internet speed depends on their service.

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• I get my internet through a Repeater.  There is a POE carrier then online, then a router adapter yet.   Can I use an Airport Extreme with POE to improve my WiFi range?

  I live in Baja California Surinamese no cable.  You want to improve WiFi.  Not sure how to interact with a POE.  Tried to set up the airport without a bit of luck.  Appreciate some feedback.

  If the connection between the POE (Power over Ethernet) device and the AirPort Extreme is a wireless, then you will not be able to extend the network Wi - Fi of the OCB in the extreme. This is possible with an another AirPort base station.

  In addition, only a particular model of the base station AirPort Extreme POE supported wired connections. It was discontinued in 2007 and is model # A1034.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Can I use an AirPort Extreme to add wifi to wired devices?

  Essentially, I would use an AirPort Extreme as a wifi adapter WITHOUT using it as wireless access point. I really just want to access my wireless internet and distribute the connection via Ethernet.

  For more context, I have a time capsule airport connected to my modem fiber. Time capsule does a great job of the town house with wifi coverage. However, I have a couple of components in my home theater, who are not able WiFi (DVD player, older game system, etc.). I got to have an AirPort Extreme, so my hope is to use an Internet for these components. I would have preferred that she not also "extend" the wireless network and contract my all along (I know this isn't the end of the world, I just useless expansion of the range so there is no reason for me to enter the equation or more wifi signals bouncing around the House).

  I searched a bit and encoder table extend network via wifi or the creation of a network of travelling, but I have not found a way to have the extreme put in place to receive the rebroadcasting wifi without her signal. It's something I can do?  In the circumstances, any other suggestions for setting this up that doesn't involve running one cable Ethernet or the purchase of additional equipment?

  Thanks in advance!

  I would use an AirPort Extreme as a wifi adapter WITHOUT using it as wireless access point. I really just want to access my wireless internet and distribute the connection via Ethernet.

  This would work... IF... the AirPort Extreme has been implemented to extend wireless network provided another router from Apple. Which would mean that the AirPort Extreme also would act as a point of access Wi - Fi.

  It does NOT at all if you try to connect to a third-party router wireless AirPort Extreme wirelessly.

  Ironically, an AirPort Express can be configured to do exactly what you want using either a router from Apple or a third-party router as the "primary" router If two ports Ethernet on the Express are too few in number, you can add an Ethernet switch to create more connections.

• Why can't I use my Airport Extreme routers to extend my Google fiber network?

  I had waited for a long time, and finally got Google fiber installed at my house this afternoon.  I had been so excited and had everything for my home network mapped out.

  I've never used router Wi - Fi an ISP, but I read that so many good things about the fiber of Google box Wi - Fi I had planned to make the core of my Wi - Fi network home.  The plan was to have the Google through my home box.

  I have two base stations Airport Extreme AC I used with my old set up with Time Warner.  My plan was to use to extend my Google Wi - Fi network with a floor and one on the ground floor. Unfortunately, I can not understand how to get there.

  I did a hard reset on two of my Airport Extreme routers and went to set them up as extensions, but I can't do it.  I have open Airport utility, select my device, choose 'Other Options', select 'Add to an existing network' and click Next...  Each time, my only option is to create a new network.

  Does anyone know a way around this?  I would really like to be able to have a base station wireless AC in every room of my house.  I also need the Airport Extreme routers set up somewhere in the chain so I can continue to do my wireless Time Machine backups.  Any tips?  I am currently very frustrated.

  Thanks in advance for any help!

  -Brian

  Unfortunately, Apple routers will not be able to extend wireless signal of a 3rd party router. Or, another way of saying the same thing, is that routers Apple will extend only wireless signal from another router from Apple.

  If you could install another Apple router near the Google router and connect the Apple router using an Ethernet cable to the router fiber, and configure the router from Apple provides wireless... then... other airports will be able to extend the signal of the "main" Apple router

  You can use the fiber for a second wireless network or comments... or... If you need another network, there is probably a way to disable the wireless router fiber.

  Another option... If possible... would be to run both of your Apple routers Ethernet cables to the router of fiber. Then, Apple routers can be configured to extend the network of fiber like that.  Note that Ethernet cables should be left in place permanently with this option.

• Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  Why doesn't a USB drive I have previously used with AirPort extreme appear in the finder when used locally with my Mac?

  I tried to plug it into my mac to transfer files locally but will not be displayed in the finder or disk utility. Anyone know why?

  MacBook Pro (2015 retina) OS X 10.11.2 El Capitan

  Have you shut down / turning your Mac off... power off the USB drive... Connect the drive to the Mac... start up the Mac... then, turn on the USB drive?

  If no help, there are a number of posts to the thread in the forum El Capitan of support from users who have problems on their Mac USB.  You can post there to see if anyone has the answers.

  OS X El Capitan

• I could use an airport extreme to extend my wifi network

  I was able to connect the extreme of the Airport via an ethernet cable to my sky router and use it to improve the signal? If yes how I would go about setting up

  I was able to connect the extreme of the Airport via an ethernet cable to my sky router and use it to improve the signal?

  Yes, if you understand that the Ethernet cable must remain permanently connected at all times.

  If yes how I would go about setting up

  Locate the AirPort Extreme right in the middle of the remote Valley where you need more coverage of wireless signal

  Connect an Ethernet cable from one of the LAN ports on the router from sky on 'o' WAN port on the AirPort Extreme <-->

  Run the Apple installation "Wizard".

  Assign the same exact wireless network name that uses the heaven to the AirPort Extreme router

  Assign a name of device for AirPort Extreme

  Enter the exact same word of wireless that uses the sky router

  Enter the password to confirm

  Click next and wait a minute, while the installation wizard does it all for you

  Click done when you see the installation complete message

• Why provider rental showing in box 7 on 1099 when on the rent vendor master record is selected

  Why provider location showing in box 7 on 1099 when on the rent vendor is selected.  It's about Great Plains Dynamics

  Hello

  Great Plains Dynamics is now Microsoft Dynamics.

  Check out these resources:

  Microsoft Dynamics - help and how-to (technical support options)
  http://www.Microsoft.com/en-us/Dynamics/default.aspx

  Microsoft Dynamics - community, Forums & Forum search
  http://community.dynamics.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hello! My question is, why so many photoshop is making selection when using the quick selection tool, before that it was unable to myself. Can someone tell me aolucion, please. Thank you!!

  Hi Axe_Juan,

  Could you please let me know the version of Photoshop installed on your computer?

  Also you want to State as Photoshop not to do a quick selection?

  If so, then head over to the Photoshop preferences, then the performance tab and click on 'Big and flat', restart Photoshop and then use the selection tool.

  If something else, please let me know.

  Kind regards

  Tanuj