Why is taking hours to load after the last iTunes update?

Similar Questions

• After the last Windows Update (04/27/11), my home group no longer works

  Original title: homegroup after Windows Update failure

  After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

  I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

  The resolution of the problems of the residential group has done several things, but that did not help.

  What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

• HP ENVY 360 M6: Wfii adapter on new 360 M6 desire becomes invalid after the last critical update.

  The wireless adapter on my new laptop becomes invalid after the last critical update. Reboot / restart, diagnosis or troubleshoot cannot fix or repair. I was forced to do a restore to the date preceding the update. Adapter Ok now? This is a problem on other models?

  Hello

  Try this first

  Download and install the latest driver of wireless LAN adapter can solve common problems with wireless Internet. Follow these steps to use the Device Manager to find the latest WLAN driver:

• After the last mandatory update, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  After the last mandatory update to Vista, I noticed that foulders image in my external hard drive would be stuck. This happens often.

  Please fix this.

  Hi Mikepolifka,

  ؠ What updates did you install on your computer?

  Try SafeMode as the first step.

  Safe mode is useful for troubleshooting problems with programs and drivers that might not start correctly, or that might prevent Windows from starting correctly. If a problem does not reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. If a program recently installed, device, or driver prevents Windows from running correctly, you can start your computer in safe mode, and then remove the program that is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  You can also perform a restore of the system on your computer and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If it works fine after system restore you may have to manually install updates one and check the status.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• Unable to access network printer after the last automatic update.

  After automatic security update KB2660465 and KB2661637 today, I can no longer print or access our office network printer. I think it has something to do with the Windows Firewall, but I'm not sure what to change. Any help is greatly appreciated.

  Thanks for the reply. I understand the problem. After the last update, it must have been a change to the firewall. I was finally able to reinstall the FIRST printer by turning off the firewall. This allowed me to see the printer and reinstall it. It worked very well after turning on the rear firewall after installation.

• After the last automatic update, I can't receive any email to any of my 6 email accounts?

  I have been using Thunderbird without any problems and just after the latest Automatic update, happened the other day, I can not receive or send e-mails to all. I checked all the settings of accounts and find nothing has changed. I think it's a problem with the update? I don't see any way to update or install the program without losing emails or information. Does anyone else have this problem?

  I make a new account using the same e-mail settings and was able to receive and send emails on the account that I used. So, just to try it, that I'm back in the original account and now I am able to send and receive emails again from him. I hope he takes care of the problem?

   I then removed the new account and am using the original one now.
  

  Everything works as it should right now so it's resolved for now.

  Thanks for the replies.

• Some pages are not loading after the last update v39.

  After the updated 07/07, pages many (but not all) which worked well previously are now time and need to be recharged to load (for the first time, somehow). Started by clearing cache, then checked for malware and ended by reinstalling Firefox. I copied my profile, rather than starting from scratch with extensions (about 5 only execution).

  All of these problematic pages open correctly in Internet Explorer.

  Any ideas? Thank you very much.

  As test, please disable McAfee. It caused problems.

• Why attached used pps files opened after the latest Automatic update of the ie8? I have XP SP2 and 7 PPViewer

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  also I tried to rename it as shown below, and it won't let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files (Microsoft's PowerPoint slideshow) PPS

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  After the change of show to open, close the Registry Editor window.
  For. PPT (Microsoft PowerPoint's presentation) files

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  After the change of show to open, close the Registry Editor window.

  For more information, please click on the following link:

  http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

  For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

  I hope this helps. Let us know if you need help.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files (Microsoft's PowerPoint slideshow) PPS

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  After the change of show to open, close the Registry Editor window.
  For. PPT (Microsoft PowerPoint's presentation) files

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  After the change of show to open, close the Registry Editor window.

  For more information, please click on the following link:

  http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

  For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

  I hope this helps. Let us know if you need help.

  --------------------------------------------------------------------------------
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hello

  This forum is for Windows Vista updated Threads. Please post here:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.windowsupdate&lang=en&CR=us

  Thank you for your visit,

  Rick

• BDP 3100 Youtube freeze and Yupp TV does not work after the last firmware update

  Hello

  My Youtube app on the Bluray Sony BDP - S3100 drive freezes when I play any video. It says LOADING... and plays the video completely. But the Player hangs and I have to be able to market. This started happening since yesterday is to say 26/06/2013.

  The other problem is with the YUPP TV App.

  After my latest firmware upgrade June 4, 2013 live channels on the YUPP TV app does not work peoperly. It says loading and will market every 5 to 10 seconds. On demand videos are very good. This began to happen immediately after the upgrade on June 4, 2013 (M14. R.0136). but after that, there was a more updated firmware that says that connectivity issues fixed on 08/06/2013 (M14 Version. R.0138). I've updated on my player. Yupp TV questions are still there. YouTube has been fine since then, but then the Youtube above issue started happening since yesterday and I have reported to the Youtube community as well.

  Could you fix Yupp TV, I'm sure that updating the firmware.  Also please check if Yout tube is with the firmware...

  Let me know if you need additional information.

  Thank you
  RAM

  At least I'm not alone, until a few days earlier, alls well, now, I have the same problem, so that makes three of us.  New default factory setting does not so I think a firmware issue, all other channels & functions outside of youtube look... very annoying

• Mac restarts after the last security update

  Hello, I upgraded my imac (late 2009) to El Captitan, a few days ago and everything went well and I had no problem to use it after the upgrade.

  Yesterday I tried to update the last security fix (2016-001 10.11.6) and now it will not re - start. I get a clear grey screen with a circle with a line through it.

  Can anyone help please?

  Hello SallyP,

  Thank you for using communities of Apple Support. It is my understanding of your light a circle with a bar symbol backslash when you try to start your iMac. I use my iMac every day and I would be very concerned if he does not start correctly. I'm happy to help you.

  This particular screen means that your Mac could not find a valid system folder from upward. I recommend that you try reinstalling OS X using OS X Recovery. Please follow the steps below.

  To boot from OS X Recovery, hold down the command (⌘) r immediately after start-up or that you restart your Mac. Release when you see the Apple logo. If you can not boot from OS X Recovery, now try the Command + Option + R key at the start of the OS X Internet Recovery*.

  Start-up is finished when you see the window OS X Utilities

  Recovery of OS X

  Once your Mac OS X Recovery, choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.

  Also, here is some very useful information on the different screens that display when starting.
  On the screens you see when your Mac starts up

  Have a great day!

• Contacts file is empty after the last OS update.  I have a backup, but what is the name of file

  I have a backup, but what is the name of the contacts file so that I can restore the backup?  After that the last operating system updated, the contacts file is empty.

  If you use Time Machine for backup, you can open the app on your Mac and then click the Time Machine icon in the menu bar and then click on "Enter Time Machine".

• There was a problem with this web page, so it has been reloaded. Started happening right after the last security update.

  Since the last update security update some says there are. "There are several sites that I get the error" there was a problem with this web page, so it has been reloaded "and it does not load the site ultimately. It is in Safari. Sites will open in Chrome very well. I tried to delete the cookies and cache. Restart the browser.

  Version OS X 10.9.5

  It can happen if you have third party advertising blockers installed as extension Safari or third party plug-ins.

  How to troubleshooting instructions here.

• HP Notebook: No cursor after the last automatic update (update anniversary 10 Windows)?

  This device 15-af131dx ran a longer than normal auto update a few days ago (probably on the birthday for windows 10 upgrade). After the reboot, is no longer a visible cursor on the screen. Time, touchpad and mouse (USB), no longer works. The system recognizes USB connection (it makes a sound when I remove the USB and when I attach in another USB port), a light will appear shortly on the mouse, but then disappears. Messages to include 'Impossible to connect to the Synaptics Pointing Device Driver' and for the State of the device touchpad "this device cannot start. (Code 10) »

  Hey @Karin13,

  Welcome! The forums you'll find helping hands, solutions and suggestions! I understand that you don't have a cursor after an update has been done.

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried uninstalling the driver for the Touchpad, restart your laptop twice, then reinstall the driver for the Touchpad?

  Have you tried to use an external mouse to see if it's only the Touchpad?

  Here is a document for you called using the touchpad or the ClickPad. This document can help you with problems you encounter with the missing cursor.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Have you tried to uninstall the Windows Update?

  If this isn't the case, please follow these instructions and see if they help.

  • Safe Mode boot
  • In the search type Control Panel
  • Click on Control Panel
  • Click on programs and features
  • Click view installed updates
  • Click the drop-down list next to installed on
  • Select the dates when these problems began to occur
  • Go to the shows updates
  • Right-click on the update
  • Click on Uninstall

  Please uninstall all updates made on this date. When you're done, restart your laptop twice.

  If this does not change anything, please use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows 10:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Select "Choose a different restore point"
  • Click Next
  • A box that says "Restore your computer to the State it was in prior to the event selected" will pop up
  • Choose event
  • Click Next
  • Click Finish
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Here is a document for you on the error Code: 10 in Device Manager. "The document is Microsoft and it is called this device cannot start" error Code 10 in the Device Manager in Windows. I've included this document strictly for information purposes, if you want to know what means the error code.

  If this answer helped, please use the button accept as a Solution . If you want to give me a five high virtual, please click the Thumbs Up icon below.

  Please let me know what are the results of the above suggestions and if you need assistance.

  Thank you for agreeing!

  Have a good