Why is the worksheet grid is distorted

Similar Questions

• Why my speakers are crackling and distort the sound?

  Why my speakers are crackling and distort the sound?

  Hello

  You have a few options as I see it.

  Click Start in the search type Recovery Manager, and then click it once select Yes on user access control, and then select I need immediate help and then select driver & select recovery requires the audio driver and install it and then restart the device.

  Go into Device Manager and uninstall the sound driver and restart and unit automatically installs the driver.

  Try to run the system restore to the date where the unit was working fine.

  Try to update the driver from hp.com for Audio & Bios site.

  Last step is to perform a recovery on the unit before they please back up your data.

  If your laptop is still under warranty, contact HP and make arrangements for the speaker replaced.

• Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.

• I have illustrator cs5, and I have plans, side, rear, fronts of vehicles. I did a trace of the line of these elevations and projected using the perspective for the perspective grid tool, but I get a distorted view on it, I'm trying

  I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a trace of the line of these elevations and them projected on the perspective grid using the perspective tool.  I got a distorted view of each side of the rack.  What should I do?

  Please see the establishment.

• Why are the objects become distorted when zoomed in?

  Let's say for example that I have create a form of target at a relatively large size. I then reduce it to a more appropriate size and proceed to zoom in on the object. When I Zoom, the target is completely distorted. It is a problem I've come across recently that I just upgraded to cs4 to cs5.1. Illustrator is vector, objects must be crispy and look that even if they are resized to the size of the artboard full or down to only 1% of it, correct?

  I posted a screenshot of the issue I run underneath. The largest shape on the left is normal, and the right is the same shape just scaled down. Note: this form does not features, it's a Uni fill. Thanks for any help in advance!

  

  Turn off snap to infernal Pixel grid.

  Always read the new features in new versions to avoid ugly surprises.

  JET

• Why did I lose macros when you save the worksheet

  I opened a spreadsheet with the macro code and vb and when I save it it loses the macro.  the worksheet is protected and allows changes to cells not formulas.  When I save the worksheet, he loses the functionality to make changes.  I wrote the code in vb to allow this, but who does not feature

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums
  http://social.msdn.Microsoft.com/forums/Mr/category/VisualBasic

• Why isn't my subject stay aligned to the pixel grid after the scaling?

  All my points are lined up on the grid, but when I step up proportionately they leave the grid. I snap to Pixel and Snap To Pixel Grid both checked.

  blackmath,

  You can see more here,

  https://helpx.Adobe.com/Illustrator/using/drawing-pixel-aligned-paths-Web.html

  This paragraph is very relevant,

  Objects that are aligned to pixels, but have not the segments of vertical lines or horizontal, are not changed to match the pixel grid. For example, because a rotated rectangle doesn't have a straight vertical or horizontal segments, it is not pushed to produce crisp paths, when aligned with the pixels property is set for her.

• Why is - my music and Sound distorted on my h8-1020?

  Hello

  I noticed several times during internet browsing or listening on itunes, the music will momentarily be distorted.  If I watch a movie on my PC, the strain will also hit not synchronized sound with video.  It can get really annoying.  Also, during the game Battlefield 3, distortion will occur from time to time and make the game stutter for a while and continue as usual.  Any ideas why this happens?

  I'm running on a Pavilion h8-1020 HPE intel Core i7 - 2600 S and an EVGA GeForce GTX 560 graphics card upgrade.  Nothing is Overclocked and that the system works McAfee Total Protection and Iolo System mechanic as the only programs running with the problems mentioned above.  Also, I was getting distortion before even the video card upgrade.

  I get no error message, but it's really starting to get annoying. Any help would be greatly appreciated.

  You might have a HD audio conflict. Very well known if you install of Nvidia HD audio drivers when using onboard audio. Do not install the Nvidia HD audio drivers or disable them in Device Manager.

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan

• Error when run through the function of path to add-in with writing to the amusement of the worksheet

  Hello world

  I wondered why the error no. 7 is coming as being attached, when I run the program.

  My intention is to write (from the FIFO) data in the worksheet by using entry for measuring function. I connected 1 d table at the entrance of table 1 d of this function. I connecetd the file port add this sub VI to the controller of the file add. I couldn't connect with indicator file add. Wire broken watch by doing this.

  Can you give me a suggestion needed to overcome this error and accomplish my data record using this sub VI (write to spreadsheet.vi)?

  Required attachments are provided for your convenience.

  Thank you.

  
  

• ' Start the new grid: Yes "does not start new grid.

  Hello

  I use apex 4.2.6.

  I encountered a problem. I want to create my own grid of the apex. So I created templates in the PAGE template for container, column and line.

  
  I expect apex to create the new html markup for grid (as defined in the model) whenever I set something like "START NEW GRID: YES.

  And I expect him to create a new tag html line whenever I set something like "START NEW ROW: YES '.

  
  But this isn't the case. For example, my region parent in this example is set to start new grid. But he isn't getting wrapped.

  <div class="ui grid">
  ....REGION SHOULD GO HERE...
  </div>
  

  
  Is there something obvious that I'm missing?

  
  

  Apex. Oracle.com

  Application 47718

  
  

  TINO

  
  

  [email protected]

  
  

  password: test123
  

  
  

  Para wrote:

  https://Apex.Oracle.com/pls/Apex/f?p=87910:1

  OK, I'm always busy with this one.

  What I want to accomplish is this kind of layout.

  

  This is a documentation on the ui semantics that I use.

  http://Semantic-UI.com/collections/grid.html

  I got tangled up with grid new departure, the new starting line, new column... And so on.

  I only got tangled up with regions tho. I don't know why, but when I used the apex grid place my input elements that they behaved exactly as I wanted them to have.

  The problem with the problem of layout is that the div for the first line is not closed when it should be. I didn't spot that is still, but doing so is not being facilitated by a large number of other HTML validation errors.

  One was that the title of model of region report had an opening H1 tag and a closing tag H2. I fixed this one, but there are also a number of problems with the tables in the report (including the use of the substitution #REPORT_ATTRIBUTES string #: attributes are not synonymous of classes).

  I suggest that resolve you all these fundamental (and so easy to fix) error HTML first before focusing on the layout problem more complex. Paste the source code of the page in the W3C HTML Validator and try to fix the errors reported. Focus on those in the body of the page, which arise from the model code.

• Smart View - Essbase: connection clear the data grid

  Hi all

  I use Oracle Hyperion Smart View 11.1.2.3.000 and Essbase 11.1.2.3.000.4415 in Excel 2010.

  My spreadsheet contains data that I need to load into Essbase, but when I try to connect, the data grid is disabled...

  I have a workaround: duplicate the sheet, connection, and then copy - paste the data in the sheet of "new".

  It's very frustrating, is someone can help me please?

  See you soon,.

  When you refresh this worksheet for the first time, connecting to Essbase, going to go ahead and automatically retrieve the data of the cube - it is a normal behavior.

  Your solution - make a copy of the grid, refreshment and copy in the back, is the best workaround.

  Thank you!

• Why is my 3D can label distorted?

  I work at the CS6.

  I'm trying to display a label wrapped around a drum. I saved the label as a symbol and it mapped to the can, but the label is vertically distorted and truncated.

  Here is a sample test made of squares and a circle. When I wrap this and discovers the bottle straight, black squares are stretched vertically (and not uniformly) and the circle becomes a deformed ellipse. The lines at the top and bottom edges are truncated. This happens with any of the x, y and z display settings.

  I don't understand why this is happening and how to fix it.

  Any help appreciated.

  

  The handles are your problem.

  You need to remove the handles on both sides of the straight segment.

  After that, you will need to readjust the mapping, because there will be more sides. But then it will work:

  https://DL.dropboxusercontent.com/u/15485305/3D-mapping-handles.mov

• Change the size extraction sql array by query or the worksheet

  I have a function table in pipeline, used for debugging, which performs work on a potentially long period of time where the line of conduct is called periodically throughout the performance.

  If the preferences for the sql fetch size table is set to 1, then the result tab displays each line as it is channeled on which is exactly what I want.

  For general development, I prefer a value of 500.

  Is it possible to set this value in a SQL worksheet so that I don't have to navigate the window preferences and then reset my connection?

  I tried to use the SQL * set arraysize, but that had no effect on the results of query and executed as a script window was not helpful either.

  Is it possible to set this value in a SQL worksheet

  No, not currently.  The Sql Array Fetch size preference applies to all connections.  Looks like a developer once thought about changing this preference value whenever The VALUE ARRAYSIZE runs in a spreadsheet, but decided in the end not too - what is needed is a fetch size property with a scope at the connection level or even the level of the worksheet. Since a spreadsheet can use a connection that is not shared, which would give users precise control.

  You might want to add this as a feature on the SQL Developer Exchange request: http://sqldeveloper.oracle.com/

  Of course, it is not necessary to re-establish a connection to pick up this change of preference, but in fact can work that way in some cases.  I could be wrong, but probably result grids will pick up the new value without a reset of the connection.

  Kind regards

  Gary

  SQL development team

• I can't hide the column grid overlay in Adobe Muse?

  Hello

  I would like to know whether or not I can hide the column grid overlay in the Muse?

  Reason is I want the faster preview as I can get, because I saw the page quite often.

  Usually, I click on Cmd - P and wait 6-7 seconds before the Web page is displayed in the Muse in preview.

  When I click on Cmp - E to generate HTML and jss files, it takes about the same thing.

  So I thought why not hide the column grid and watch the page as a preview immediately. Something like Cmd - W in Indesign.

  Is this possible?

  Under display: display / hide grid Overlay (5th from the bottom)