why it takes more than 24 hours to install 140 updates to my vista?

Similar Questions

• A frozen (for more than an hour) when installing Win7 updates

  During the installation of updates during a restart, IQ506 froze, although few 'circle' still rotating, for more than an hour so far.  Message says not to put off, but nothing happens.  Where should I go from here, if I am not in power down?

  A few times just to give up and put off, I look at the HD indicator, if it goes 30 minutes without blinking I give him a strong power off, if the HD is flashing I will usually let it run all night

• My laptop took more than 12 hours to install an update from windows and is still doing, and will not be closed.

  I use Vista and an HP Pavilion laptop. I noticed the closing down and install updates logo was so I used it and my laptop started to install 2 updates (June 18, 2011). Finished the first, it was install the 2nd for more than 12 hours. The screen tells me not power off or unplug the machine.  The drive light flashes occasionally, it can come entirely for a second or two. What can I do? Surely it's far from since long to be normal and something went wrong.  The laptop keys are unresponsive. The cursor has changed to the blue circle by day and cycles but will not move with the mouse or key.  In the past, some updates took 3-4 hours, they have been great with more than a dozen of components, but never anywhere as long as it. I opened and closed the DVD several times, that works and is empty, just to see if anything's happening. What should I do? Should I continue to wait? If so how long? Can I really just ignore the warnings and turn it off and restart it?

  1. you receive an error message?

  2 did you change on your computer before this problem?

  3. what anti-virus software is installed on your computer?

  I suggest to shut down your computer and try to install the updates manually.

  Method 1

  You can temporarily disable antivirus.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: after troubleshooting activate the anti-virus software

  Method 2

  You can download and install the update manually failed in a clean boot state.

  Step 1

  Put your computer in a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2

  Download and install the KB from the link below.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Check whether the problem is resolved.

• Why does take more than 20 hours to run MSE from the upgrade from Vista to Windows 7

  I've upgraded to Windows 7 a couple of days.  Normally, I run a full scan of MSE once a week at night while I'm SLEEPING.  Since upgrading to Windows 7; MSE 5% complete the next morning.  I don't know why it happened - please let me how to fix it.

  I suspect that the problem is that your computer came into fashion "sleep" during execution of MSE.  There are a number of discussions related to that on this forum as the following: http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/why-doesn option is to change your power settings to prevent the "sleep mode", and then change them back.  What I do is run a small program called insomnia which remains visible on the screen, so I remember to turn off once the scan is complete: http://insomnia.en.softonic.com/

• Stupid MDX script takes more than 10 hours to run in ASO

  I inherited a stupid MDX takes more than 10 hours to run in ASO. This formula is member of the map called forecast scenario & real scenario.

  This is the equivalent of ASOsamp of it:

  

  I think I can shorten it to:

  

  (1) are the following equivalent?

  

  IIF (([ActualScenario],[Expense]) + 0 <>0)

  can be replaced by

  

  IIF (NonEmptySubset ([ActualScenario], [Expense])

  ?

  2)

  The reason I can remove almost all the lines for the PERIOD - his first line, it is already check if [period] is zero. Then, it updates level 0.

  So why would we want to write the code to update (period) levels 1, 2 and 3?  ASO is supposed to automatically consolidate all other levels 1 to 3. So why is this MDX aggregating levels 1 to 3?

  (3) in fact, I don't know why we need this Case statement:

  CASE WHEN ISLEVEL ([period]. CurrentMember, 0)

  I thought THAT MDX in Member roadmap scenario only works on members leaves (zero level).

  PS.

  The time dimension is simply

  Year

  -T1

  -Jan

  -Feb

  -Mar

  -Qtr2

  etc.

  Thank you and Merry Christmas / happy holidays!

  PS. I changed my name to "SEEP limits."

  Rolling up the quarters is the real problem. Since you have a verification statement to see if you are at level 0 do the math, you're cutting everything above level 0. Yes, it's fast - but it's because you're excluding senior level members.

  I don't know how this cube is great, but you can possibly use this formula with a procedure calc to write the data to another Member. In this way the aggregation would work without any formula.

• Treatment of the FileBundle, please wait: the process takes more than one hour

  I'm trying to submit my file app world Portal bar and it takes more than an hour to process filebundle.

  I am in the presentation of the new press, step 4.

  I run first download a small file (3 MB). After downloading it, I deleted it and then I download my bar of 13MB file.

• Why did take more than 15 minutes and always my PDF conversion is not downloaded?

  Why did take more than 15 minutes and always my PDF conversion is not downloaded?

  Hi Karen,.

  Try to convert by using the web Interface using this URL: https://cloud.acrobat.com

  Kind regards
  Rahul

• Java has more than 24 hours to install and always current

  I have a new HP Pavilion dv6-7028TX laptop. There is no java at all on this subject. So so I'm trying to download and install without success. If anyone has had this problem and what can I do to fix this?  It took more than 24 hours to install and that is 16% and the rest is pending.     Help!

  Hi pynk7,

  I don't know what's going on, but after doing a Google search, I see many people with the same question. Most of the people are suggesting download from another source. You can download from Cnet, Sun or Oracle. You have any other problems with other sites or downloads?

  http://goo.GL/3MC2

  http://goo.GL/zXjC

  http://goo.GL/d3aFj

  Please let me know if this can help,

• Why does take more than 10 minutes for the internet to connect?

  My vista system takes more than 10 minutes to have an internet connection after I reload. I can get an immediate connection when restart in safe mode but not in normal mode. I am direct connection. I check start programs but can't find anything causing conflicts when starting upwards. Please help this Office HP a6530f m 2009 novice computer user!

  Susan,

  I would have you try both.

  Thank you.

• WMP 12 albums on entry each time charging takes more than 1 hour to load

  I uninstalled and reinstalled according to the suggestions on the internet without success.

   

  Hello

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Windows Media Player takes more time to load the albums.

  This can happen due to the interruption of some third-party programs.

  I suggest that you put the computer in a clean boot state and check if the problem persists.

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Windows update takes more than 3 hours

  I have a new laptop with windows 7, it began to be updated on its own with 35 updates and its been over 3 hours and said not to shut down the computer, also says its configuration. I stopped it and when I turned it back on the same screen

  I have the same problem and lasts 3 hours, and I'm still waiting! If I have a notebook, turn the power off and must leave, how do I stop the process? I have to write my linux server because my new machine with win 7 does not work, turn not turned off and I can unplug or stop. any solution? (an acceptable)

  The update process will take as long as it takes unfortunately. A major upgrade starts when you have sufficient time to undertake the task.

  If you're having trouble-

  • Free unlimited installation and compatibility support is available for any questions related to the Service Packs of Windows 7. Availability of support chat, telephone or electronic mail differs depending on your location. Some questions may require more support to there have advanced a charge: https://support.microsoft.com/oas/default.aspx?&gprid=14496&&st=1&wfxredirect=1&sd=gn

• I started to run Disk Defragmenter on my laptop with Windows Vista to 7:45 last night. She is still ongoing at 10:55 the next day. That is what it is? I can't believe that it takes more than 12 hours to defragment a hard drive.

  Vista
  Defragmenter

  Hi Augie,

  Welcome to the Microsoft Answers site!

  1. you run defrag disk for the first time?

  Disk Defragmenter is a tool that rearranges the data on your hard drive and brings together fragmented files so that your computer can run more efficiently. We must keep in mind that the Disk Defragmenter uses disk access low priority and processor so that it is not influence your current running programs. This automatically translates a slower process. Disk defragmentation can take a long time if you run it for the first time and also depend on the space of hard disk and available data. If may take up to 15-16 hours, depending on the data and the bad clusters on the hard drive.

  Try the suggested methods.

  Method 1

  If you want to reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use disk cleanup. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Method 2

  You can run a disk scan command to remove bad sectors on the hard drive, then run Disk Defragmenter.

  1. open the computer by clicking the Start button, click computer.

  2. right click on the hard drive you want to check, and then click Properties.

  3. click on the sur l' onglet tab Tools and then, under error-checking, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search for and attempt recovery of bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select automatically fix file system errors and search for and attempt recovery of bad sectors.

  4. click on Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  http://support.Microsoft.com/kb/942092

  Check your hard disk for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• deletion of the user seems to take more than 1 hour? My iMac stills delete after more than 1 hour?

  Creates an account for a family member. Try to delete but it seems take som time. Is this OK or something wrong?

  Depends on. Did you select immediately remove or secure erase option. The latter could easily take hours to days depending on the size of the user's Home folder. Of course, still a base deletion can take some time for a large number of files. Be patient. If ever completed, and then try to shut down the computer and restart. Then do an Empty Trash by CTRL - or RIGHT click on the Recycle Bin and selecting this option.

• Suite CS6 takes more than 4 hours to download on my new MacBook Pro.

  I am trying to download all CS6 on my brand new MacBook Pro w / retina display (no other news program other than standard programs of the MacBook is currently on the computer). I started at about 7:15 this morning and quickly downloading up to 85% of the program.  He is now 85 percent since then and the "time remaining" slowly went from 6 minutes to reaminig now 40 minutes to download. It is now just after 11 hours.  Is this normal or is - this program does not download properly?

  It is not downloading correctly which is dependent on your internet connection, not what programs you have running.

  probably, you need to delete what is downloaded and start again.

• After April updates installed WinXP so slow takes more than an hour to connect and create the desktop icons

  Just ran the April updates on Windows XP.
  Restarted, connected (connection to the normal domain but with no controllers available as domain is no longer in use and I don't want to mess with the settings of the user account).
  Very slow to build office, took several minutes just to display the wallpaper, then icons took a minute or two each to paint. Systray icons present but being not properly painted, taskbar autohide as expected, some startup app dialog boxes appeared as expected, but very slowly, still failed to see start/programs, too slow to do anything.

  Have not tried any uninstall or safe mode start-up etc. as hoping that someone already know possible cause and there are so many updates to eliminate this time!
  Any suggestions pls?

  Update - good news, seems to have fixed the
  After having tried to disable ZoneAlarms (never refreshed dialogue), disconnect from the network and disconnection (zclient termination necessary), log in as an administrator and seeing office paint normally (and ZA does not seem to have been disabled), logout, then again as a user and see an empty office for long hours that had to be reset , the next reboot and the connection seems to be functioning normally. Just a waste of time that meant machine didn't get used for a day and night I waited things.
  Guess I'd better try the update on my other machines now.