Why 'More PC Settings' continuously stop working?

Similar Questions

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• Why Photoshop CC 2015 suddenly stop working?

  Why Photoshop CC 2015 suddenly stop working?

  Go first, install the updates. You should be on 16.1.2.

• iPhone 6s more touch ID has stopped working

  ID touch has stopped working, I'm in iOS 9.1.

  Is there a fix for this problem?

  Hi rulmer,

  If you are not able to use Touch ID on your iPhone, the steps below can help restore this functionality to the device.

  • If you have just restarted your device
  • If your fingerprint is not recognized five times in a row
  • If you have not unlocked your device to more than 48 hours

  • If you have just registered or deleted fingerprints
  • If you try to open Touch ID & access code in the settings menu
  • If necessary password is defined on immediately under settings > General > Restrictions

  If you still need help, follow these steps. Try again after each step:

  1. Make sure you have the latest version of iOS.
  2. Make sure that your fingers and the Home button are clean and dry. 1 for Home button, use a clean, lint cloth to wipe off any dirt or debris.
  3. Your finger should completely cover the Home button, touch the surrounding metal ring. Contact ID is scanning, you should not press hard, tap too quickly or move your finger.
  4. If you use a case or a protective screen, make sure that it does not cover the Home button or the surrounding ring.
  5. Tap Settings > Touch ID & access code. Make sure that the Unlock iPhone or iTunes and App Store is lit, and that you have entered one or more fingerprints.
  6. Try to register another finger.
  7. If you cannot register your finger, take your camera to a store Apple Store or Apple authorized service provideror Contact the Apple Support.

  1 moisture, sweat, lotions, oils, cuts, or dry skin may affect fingerprint recognition. Certain activities can also temporarily affect the recognition of fingerprints, including exercise, shower, swimming, cooking, or other conditions or changes that affect your fingerprints.

  Use the ID button on iPhone and iPad
  https://support.Apple.com/en-us/HT201371

  Kind regards!

• Why a snap to grid stopped working on my desktop?

  I am running Windows Vista and after various problems, decided to restore my computer to factory settings. Since doing so, align the grid function has stopped working on my desk, leaving my icons in a shambles. Reorganization of the automatic still work which suits my icons in an order chosen by Vista, but the attribute align to the grid function does not work if I select it or not. If someone has experienced this problem and more importantly, anyone can offer a solution to my problem?

  Hello

  Try to update your video driver and check if there is any difference.

  Concerning

• Why my USB keyboard did stop working?

  Can some tell me why my USB keyboard stopped working after I upgraded my mac OS X EL Capitan 10.11.4?

  Seems that Apple had broken the old apple keyboard wired usb on OS X 10.11.4. New Apple wireless keyboard worked fine.

  Was not working at boot time and didn't work with windows bootcamp and did not work when started from the recovery partition, so it must be a problem with boot loader.

  Reseting EPRAM and SMC has failed.

  Time Machine restore to old 10.11.3, 10.11 install USB appears to only way to solve the problem.

  With old 10.11 usb install, because the keyboard did not work at boot time and restoring from Time Machine backup starting 10.11.4 recovery partition broke my fusion disk partition tables. I had to manually destroy disc fusion and remove partitions on the hard drive and ssd of command-line diskutil and create new logical volume of fusion in the car and after that he restore backup from Time Machine.

  Very well of the keyboard now work but lost 1 day and Windows 10/bootcamp partition in the process.

  I have iMac 27 "5 k end of 2015, but I like to use wired keyboard numpad because.

• My Kodak program continuously stops working.

  I use my Kodak program quite often.  However, when I'm editing, the program stops working.  Sometimes, after a few minutes, sometimes after an hour.  Also, I can not upload photos to Kodak Gallery.  I talked to Kodak, but they don't seem to know how to solve this problem.  I'd appreciate any help.  Thank you in advance.  Always learn, AL

  Hi AL,.

  Do you remember what makes any agreement, changes this question?

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of

  the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• OfficeJet Pro 8500 has more: back two has stopped working

  Two sides priting has stopped working. Print both sides "checked" but print dialog shows released a face on two sheets or "layout" began to show "long edge binding" as GRAYED OUT. Any ideas please?

  Hey @mossy21,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have options with double-sided printing to your Officejet Pro 8500 at more of your Mac 10.10 system. I can help with that.

  Here's what we will try to solve this problem:

  1. Go to your Apple icon, system preferences, printers and Scanners.
  2. Hold down the command key and click on the image to your printer on the left.
  3. Click on reset printing system.
  4. Go to Applications, utilities, disk utility.
  5. Click "Macintosh HD" on the left.
  6. Click on verify disk permissions. This should take about 10 minutes.
  7. Click on repair disk permissions. This should take about 10 minutes.
  8. Restart your Mac.
  9. Return to the printers and Scanners.
  10. Click on the button "+" at the bottom left.
  11. Select your printer.
  12. Next to the line indicating the use, click on the box and click on the name of your printer in the list.
  13. Click on Add.
  14. Try to print.

  This should allow you to print double-sided.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• Why open with photoshop has stopped working

  I use the addon 'Open with Photoshop' first of all, it has become available, but it has now stopped working since the last update of FF. I tried reinstalling etc, but makes no difference.

  Having the same problem with "view source in Dreamweaver.

  I use these features a lot of so any help would be appreciated

  Go to their site for support and updates. Ask questions.

• Why my 8 Adobe has stopped working and I am unable to download the latest updates?

  My 8 Adobe has stop working and now I am unable to open everything about Adobe. I tried to update to the latest cersion, but don't succeed.

  The most recent version is Adobe reader X (10)

  I do as suggested by Azam and uninstall the previous version. Have you tried a system restore to an earlier date and then tried to uninstall. If you click on "help" in the toolbar of the Adobe Reader there may be an option "repair Adobe installation".

  You could also try to reinstall Reader 8 and try once again an uninstall.

  If all else fails I try and install Reader X in any case if you have a corrupted version of the 8

• Why my reading of mercury stop working with graphics Nvidia GeForce GTX580?

  Hi, anyone experienced a malfunction like this:

  My stop playback of mercury with a Nvidia GeForce GTX580 graphics card,

  It worked perfectly well, after 2 months doesn't work is not on the system (windows 7 ultimate 64-bit) 16 GB ram Intel Core 2 Quad CPU Q9950 @ 2.83 GHz)

  reading of mercury is not avaiable more even after system update and graphics card?

  Thanks for help

  LEA

  OK, got it!

  with the help of found old notes:

  to resolve this problem, you need to update your graphics card compatibility list:

  After updateing graphics card driver:

  Add your name to the map on cuda_supported_cards.txt in adobe 5.0 first file!

  looks like this:

  GeForce GTX 285

  GeForce GTX 470

  GeForce GTX 580

  Quadro CX

  Quadro FX 3800

  Quadro FX 4800

  Quadro FX 5800

  Quadro 4000

  Quadro 5000

  Quadro 5000M

  and everything works well again

  Thank you

• Photoshop CS6 recently why Marquee and Lasso tools stop working correctly?

  I purchased Production Premium CS6 several years.  Recently, my marquee selection tool and lasso will not bring a selection once.  In order to reuse them, I have to restart Photoshop, but can only use the tools once. I can't use the shortcut (Ctrl Alt Shift) when opening Photoshop to reset the default preferences because Photoshop does not open when Ctrl Alt Shift are pressed and held.  I tried the manual technique to reset the preferences by removing the preferences of psp file.  But the end result is the same - the tools work only once.  It's happening now with the type tool as well.  I tried to see if my graphics card is causing the problem, but it's not.  In fact, the selection tools work not at all when I 'use the graphics processor' unchecked.  I have the latest update for Photoshop: 13.0.1 x 64 what do I do now?

  Well, the problem has been resolved.  I recently installed the software synergy to share my keyboard and mouse between two computers.  As soon as I stopped synergy, the selection tools in Photoshop worked properly.  Synergy also caused selection problems in Microsoft Word.  Thanks to all those who responded so quickly to my question.

• Why my wireless adapter has stop working on my brand new hp pavilion g7-1338dx.

  I ran the wizard network without success and reset my router several times. When I get it to connect, it will stay connected until I stopped. Then when I turn on the computer the next time it doesn, t want yo connect.

  It, s a new brand Paviloion HP g7-1338dx running Windows 7 Premium Home Edition.

  If you need more information, let me know!

  I appreciate all your advice, but I've had a lot a more simple solution. Got a new router from AT & T and Walla, no more problems.

  The only thing I can think to problems with my old router that supported 8032.11 a, b and the new router that supports 802. 11A, through 802.11 g

  Maybe it was the difference in the Protocol of security between the two and try to pass between the two.

• Why my Adobe Encore has stopped working since I upgraded to Windows 10?

  When I try to launch again through the dynamic link in Adobe Premier, I get an error message "failed to initialize the Quicktime. Please try reinstalling Quicktime. "I follow this teaching, but the error just return. Does anyone else have this problem? And, an easy solution, I hope! Kind regards.

  To the question in your title... Still is 2012, WELL before Win10, if you're lucky, it works in all the

  An idea that MAY work to install or run some programs in Windows old 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  For your problem of dynamic links, simply export it to Premiere Pro using a preset that is appropriate, such as MPEG2-DVD for DVD creation and import the files again (MPEG2-DVD preset creates two files, audio & videos, that is, still takes to creating DVDs)

• Why not Bridge CS3 just stops working?

  Hello.

  As of today, I started having trouble with Bridge CS3. Out of the blue, just bridge cannot be launched more. I'm running 10.6.2 and it worked well, I changed nothing and like it, whenever I try to start the application - nothing. Just an error notification asking me if I want to report the accident or ignore it. The madman it is that everything works fine, only Bridge does not want to play with me.

  I have uninstalled all CS3 Design Standard, did a reboot, installed the whole package again - without any changes. Bridge just crashes at startup.

  Does anyone else have this problem a little bit? EC which could I / try?

  If you already have the discount cache files here is a workaround for a

  fresh start (but not guaranteed as it does in a new user, it can)

  also mean that corruption in your current user account).

  First launch apple disk utility and check and fix permissions

  If you already have not done. (you must do this anyway or use one)

  maintenance like Cocktail application to automate this process on a daily basis).

  Exit the bridge and in your username by default (the one with problems) go to the

  Manual and library user delete the Bridge2.plist preference file

  folder to the trash.

  In the same library, go to Caches Adobe Bridge CS3 and inherent grab the two files

  and drag them to the trash (or back up to a folder outside the library).

  Plist and cache files will renew it self rebooted after Bridge.

  Also hold down the option key while restarting the bridge after you remove the

  mentioned in the files, and then select Reset Preferences.

  All bridge prefs and interface to your own wishes and try again.

  Should I try copying all the files in a library to mine? Or is a

  full (I already tried as a first proposal of witch) to reinstall the only solution?

  Once again, thank you for your patience and your help!