Why my wireless adapter has stop working on my brand new hp pavilion g7-1338dx.

Similar Questions

• HP 23-q152m: touchscreen has stopped working on my brand new HP 23-Q152m

  I've had this computer for a few days.  In the beginning, everything worked perfectly, including the touchscreen.

  But today, I realized suddenly that the touchscreen does not at all.   Nothing happens at all the

  I tried to go through the settings, but I wouldn't change a thing, and everything seems good.

  When I go to the screen 'about' on the Control Panel, it says correctly Pen and Touch - Support Windows touch complete with 10 points of contact.

  Any ideas?

  Gary, welcome to the forum.

  The first thing you should do is run HP and Windows Update to make sure that the software and drivers are all updated to the latest version.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?

• Your wireless card has stopped working properly.

  Often, I receive this message "problem reports and solution:
  A problem with your wireless network card

  Your wireless card has stopped working properly.
  There is a network adapter that allows your computer to connect to a wireless network.
  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
  The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

  I would be grateful for any advice.
  Thanks in advance.

  Hi dtw1970,

  While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

  Check the link and try the steps mentioned below.
  http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

  You can also try posting your query in the Dell Community, see the link below.
  http://en.community.Dell.com/

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite C665 - Ethernet adapter has stopped working

  Hello
  A few weeks ago, I noticed that the ethernet adapter has stopped working. It has disappeared from the Device Manager, and I can only access internet by wifi.

  When I turn off wifi and connect the ethernet cable (which connects to the modem) nothing works.
  I tried to restore the windows settings, but that didn't work.

  Can someone help me?

  It is possible that the LAN module is defective.
  All you can do now is to check and install the original recovery image and check the functionality with the factory settings. If the problem persists it is definitely hardware problem.

  I think that it is not worth to fix it if you can continue to work with WLAN connectivity.
  What do you think of this?

• HP touchsmart IQ775 Wireless mouse has stopped working.

  Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

  Hello

  HP also has their own update so he could be there?

  I would stop automatic driver updates, because they are often older certified and MS is far behind.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
  ------------------------------------------------------

  This, to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why does my network wireless adapter constantly stop work?

  When using my laptop, whether online or not, my wireless connection will stop working. When I use the shooter Troubé it tells me that my wireless network adapter is disabled. Why is it run continuously off the coast?

  Hello

  Of course, you can try these suggestions and let us know the results so that we can better help you.

• Lightning network adapter has stopped working

  Hello

  All of a sudden, my (original Apple) map network Thunderbolt has stopped working. I'm looking for advice to get it working again without reinstalling. This is the second time in 6 months that it happened, and the last time a reformatting it fixed and restore my entire user account does not restore the problem, so all signs point to something in the heart of the system and not "userland".

  Why I know that the adapter is not the problem:

  -Adapters two colleagues also do not work

  -Adapter works very well in recovery, but not once started

  What happens when I plug:

  -Lights led network switch, so a link is established

  -L' adapter remains 'red' in the network settings

  -dmesg shows:

  IOThunderboltSwitch < 0 > (0x0): listenerCallback - HPD Thunderbolt package for road port = 0 x 0 = 1 disconnect = 0

  [Start of PCI configuration]

  [End of PCI, bridges 14, 15 devices configuration]

  No obvious signs of problems.

  Steps taken to solve the problems:

  -If I delete the card of network settings, I can never add again; He simply never shown even if it is plugged in and the link light is on the switch.

  -Crushed/Library/Preferences/SystemConfiguration and restarted. Always impossible to add the interface, as mentioned above, it never appears.

  At this point, I am of ideas. Any help would be greatly appreciated.

  Thank you!

  Figured it out... it's driver Linksys USB3GIG crap that breaks the kext IONetworking signature.

  ERROR: invalid signature for com.apple.iokit.IONetworkingFamily, does not load

  After removing AppleRTL815 * from /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/ and restart, thunderbolt ethernet is back

• sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

  My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

  Hello

  -Don't you make changes to your computer because of which the question began?

  I would recommend that you follow the steps in this article and see if they help.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

• my wireless mouse has stopped working

  I have two mouse Microsoft Wireless in the 3500 Series and 4000 series, I had the 4000 first order works now my 3500 has stopped working can help a whole?

  Hi Richard,

  Here are a few troubleshooting steps that you can try to solve this problem.

  
  Method 1: Run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems

  If the method above does not work, proceed to the next method.

  Method 2: Refer to the suggestions for the following links.
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

  Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

  Hello

  What is the model number of the mouse?

  Method 1:

  I suggest you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

  http://support.Microsoft.com/ph/7746

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

  I would suggest you also contact the Logitech support forum and check.

  http://www.Logitech.com/en-us/support

• Why my 8 Adobe has stopped working and I am unable to download the latest updates?

  My 8 Adobe has stop working and now I am unable to open everything about Adobe. I tried to update to the latest cersion, but don't succeed.

  The most recent version is Adobe reader X (10)

  I do as suggested by Azam and uninstall the previous version. Have you tried a system restore to an earlier date and then tried to uninstall. If you click on "help" in the toolbar of the Adobe Reader there may be an option "repair Adobe installation".

  You could also try to reinstall Reader 8 and try once again an uninstall.

  If all else fails I try and install Reader X in any case if you have a corrupted version of the 8

• Your wireless card has stopped working properly, because a compatible driver is not available for this version of Windows.

  I'm not very tech-savvy... like everything. So I have no idea what to do on this subject, but the problem is very irritating because my wireless just randomly stops working for a short period of time, and it happens quite often. Does anyone have any suggestions?

  My computer told me to go to the website of Buffalo, but I had no idea what to do from there.

  Hi Chadbassett,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description provided, I understand that you are facing a problem connecting to the wireless network.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?

  2. What is the brand and model of your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the windows network troubleshooter, and check if it helps.

  Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

  Method 2:

  I suggest you to download and install the latest drivers wireless in the factory.

  Note: If the drive is not compatible with windows 7, I recommend you to install the driver software in compatibility mode and check if that helps.

  Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

  Reference:

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  We would be more than happy to help you if the steps above did not solve the problem.

• Internet Explorer has stopped working and causes windows close program Pavilion QU297AA #ABG

  I have a HP Pavillion QU297AA #ABG running on Windows 7.  Since the first day of installation I click the links and get the message

  Internet Explorer has stopped working.  A problem caused by the OTS program works correctly.  Windows will close the program & warn you if a solution is available.

  I know this isn't not my internet as my laptop when used on my connection Wireless at home I have this problem & no more than my previous desktop that I have improved.  Also, I don't think I have a virus I have an antivirus AVG (the paid version) set up scan to run daily to detect problems.  It's so frustrating can anyone offer a solution I have had this problem since I plugged in my new office building.

  Hello

  Please find the link given below might help you solve your problem.

  Troubleshoot Internet Explorer