iPhone 6s more touch ID has stopped working

Similar Questions

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• OfficeJet Pro 8500 has more: back two has stopped working

  Two sides priting has stopped working. Print both sides "checked" but print dialog shows released a face on two sheets or "layout" began to show "long edge binding" as GRAYED OUT. Any ideas please?

  Hey @mossy21,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have options with double-sided printing to your Officejet Pro 8500 at more of your Mac 10.10 system. I can help with that.

  Here's what we will try to solve this problem:

  1. Go to your Apple icon, system preferences, printers and Scanners.
  2. Hold down the command key and click on the image to your printer on the left.
  3. Click on reset printing system.
  4. Go to Applications, utilities, disk utility.
  5. Click "Macintosh HD" on the left.
  6. Click on verify disk permissions. This should take about 10 minutes.
  7. Click on repair disk permissions. This should take about 10 minutes.
  8. Restart your Mac.
  9. Return to the printers and Scanners.
  10. Click on the button "+" at the bottom left.
  11. Select your printer.
  12. Next to the line indicating the use, click on the box and click on the name of your printer in the list.
  13. Click on Add.
  14. Try to print.

  This should allow you to print double-sided.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

  Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

  I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

  Thank you

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select Activate from the list.
  6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

  On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

  If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
  In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

• Screen touch S410p has stopped working

  Touch screen of my laptop feature stopped working just in time. When I turned off my laptop, tere this update of windows which lasted more or less an hour. After that, the touch screen has just stopped working. Note that there is no installation program before uninstall antivirus - all programs and files in the laptop is as it was when I bought it.

  Running Windows 8 unilingual laptop

  We'll see. I didn't know what exactly I did, but the touch screen feature is stable now - more no stop service after a certain time. I upgraded to 8.1 and windows updates installed. Who must have done the trick. in any case, I thank very you much for helping me with this problem.

• HP 15 laptop: touch screen has stopped working

  I have a HP TouchSmart laptop computer model 15-f010wm, product number J8A22UA #ABA, 8.1 with Bing 64-bit Windows.

  The first day of the 3-4, I used this computer it worked like a charm. I loved. Now a few times touchscreen will work for about 5 min and then stops or does not work. When it stops working, I get a pop up in the lower right corner that says: the last USB device not recognized USB device you connected to this computer has malfunctioned, and the window does not recognize. (I have not plugged anything in this computer but except the power cord)  When this happens and you go to Device Manager sometimes, there will be a yellow! triangle under the Human Interface Devices drop down and some times yellow! triangle will be under Universal Serial Bus controllers list down. And if you go to they system screen line Pen and touch passes to no. Pen or press enter is available for this view.

  I tried to do a system restore. Also, I did a test fast system and a comprehensive system. The results have been the primary battery check ok and all the others said past. And of course I can't make the screen test because the touch screen does not work.

  Please help me with this. My computer was a gift, my other is really old and was ready for an upgrade. I've never had problem with HP before.

  Hi @Jen81 ,

  Thank you for visiting the Forums HP's Support and welcome. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link for the number of support in your region. They will be happy to help you immediately.

  Thank you.

• touch screen has stopped working Samsung ativ 500 t, perhaps after upgrade to pro

  I have Samsung ativ pc 500 t. IT has been bundled with Windows 8 and worked perfectly. Last Thursday I have upgraded to Windows 8 Pro and a few hours later, on Friday he lost touch ability partially. Can I use the stylus (pen s), but I can't use the fingers. I have attached the device info on trh device I think should be linked to the touch screen with your fingers.

  Any help would be much appreciated. Thank you, David

  List of devices
  Created using DevManView

  Device Name	Manufacturer	Service	Code of Type of device	Name of Type of the device	Device ID of Instance	Location	Capacity of	Config flags	Disabled	Connected	Peripheral register 1 time	Device register time 2	The drive letter	Driver description	Driver version	.inf File	.inf Section	Driver Date	Record of pilot time
  HID-compliant device	(Standard system devices)		HIDClass		HID\ATML1000 & Col01\4 & 2101be6d & 0 & 0000		0x000000e0	0x00000000	NO.	NO.	13 12. 2012 0:33:49	13 12. 2012 0:33:49		HID-compliant device	6.2.9200.16461	Input.inf	HID_Raw_Inst.NT	21 6. 2006	26 1. 2013 11:34:33

  Hello

  I use Samsung ATIV XE700T and win 8.
  Happens to me too after I uninstalled the current Wacom driver (7.1.0 - 8-Win8) then install (7.0.9 - 5 - Win 7).
  Then why I have installed Win 7 driver if I win 8 as an operating system?
  Well, my pen was not working on Adobe Flash Professional (worked nowhere else). So after that I installed the Win 7 driver it started working on perfect Flash too.
  I don't know if you've already discovered but if you plug a usb device, finger touch works for awhile, then again stops working. And the same thing happens when you plug the device you plugged in.
  As I am an Illustrator with the stylus on the Flash for drawing is a priority for me so I did re-install the driver for Win8 again.
  Solution:
  
  
  1. go to "Control Panel-> programs" and uninstall the driver current (ISD Tablet).
  2. restart your computer.
  3. download and install this driver.
  4 restart your computer.
  
  
  You're done!
  Kind regards
  Kemal KAYA

• Why my iPhone 5 c rear camera has stopped working?

  I got my iPhone 5 c last Christmas and it has been fine for the verbal time. I realized my camera back no longer works. Before everyone tells me to reset, I tried so many things, I talked to apple and all, nothing seems to work. My iPhone has got out of the shell once or two, if this is useful. And my forehead and flashlight work very well. When I turn on the camera app and switch rear camera, it goes fuzzy and hangs on the last image in the image of the front camera. Someone at - it help him? I'd like to avoid having a new device

  Sorry for the random capital letters too, he kept on the move

  It looks like a hardware problem

  Take it to an Apple store or an authorized repair center

• Satellite M40X-189 - Touch Pad has stopped working

  The touchpad has frozen. I rebooted the computer and the touchpad worked. This happened several times, and then by restarting does not clear the problem. I checked in the device several times Manager and sometimes the mouse was listed and sometimes it wasn't! I restored the computer to an earlier time when the touchpad was working but it does not solve it. An Agent from Toshiba offers the soft ware was corrupted and I need to save every thing and use the recovery disk to reload the software for the tablet. I'm not ready to do it again. Currently an ALPS pointing device and a compatible mouse HID are listed in Device Manager, and both are erroneously reported as working. Any other ideas on how to fix the touch pad?

  Hello

  In my opinion, you should try to use an external mouse to see if it works again and again. Believe me on this path it is not easy to say why this happens.

  There may be a hardware problem, but it must be tested. If you preinstall the unit with recovery CD unit will be clean and on this path, it is not possible to say that some additional software has any influence on that.

• Touch screen has stopped working - HP Pavilion 23 all-in-one

  Touch screen no longer responds to any contact afer 9 months use.    Details of the said system - touch compatible HID "this device works correctly.

  Hi JohnSevenoaks,

  Welcome to the HP Forums!

  I read your post on how your touchscreen no longer work, and I would be happy to guide you to a resolution! To start, I have to ask you a few questions:

  • What is product and model number from your desktop?
  • What version of Windows you have installed on your computer?
  • Have you installed a new software or hardware on your computer recently?
  • Has your computer has completed its important Windows updates?

  In the meantime, please follow this document on the HP TouchSmart PC - troubleshooting problems of touchscreen Windows 7 or for Windows 8. This should help to determine if the problem is software or hardware related.

  Please re-post with the results of your troubleshooting, as well as the requested information. I look forward to your reply!

  See you soon!

• My wife has a Mini IPAD and the touch screen has stopped working. If anyone has had similar problems and if so is there a cure?

  HHas someone at - he had problems with the IPAD MIni touchscreen unresponsive? If so, can we do anything to fix the prob?

  Try these standard troubleshooting steps in the following order:

  Reset: Press the home and power buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  Catering: Connect your device to iTunes on your computer, backup, and then select factory restore.

  See here for more details on the restoration: https://support.apple.com/en-us/HT201252

  If none of these work your device could have developed a hardware problem. Contact Apple technical support: http://www.apple.com/contact/

• iOS 9.2 Touch ID has stopped working

  I have an iPhone 6 Plus and recently upgraded to IOS 9.2.   Unfortunately, the contact ID no longer works.    I added a fingerprint, but using the new footprint does not work either.    It was also very difficult to form the new imprint. Now in applications such as Amazon and Apple pay don't work at all using the fingerprint. I tried to reset and nothing changed. Any ideas?

  Restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Touch laptop has stopped working!

  Yesterday, 31/07/14, my mother was uploading images on my laptop HP Pavilion TouchSmart 15. When she finished, I wanted to watch a video on YouTube so I'm on the computer, but on the lockscreen, I couldn't drag and so I had to click and when I got to my place of password, he didn't touch keyboard that appears usually there. And now I can't read some of my games and I have lost some capacity that this laptop great brings me. Can someone tell me what I did? My mother said the only button what it does press f5 at the top of the keyborad. What is the problem?

  Hello Great_Glob,

  As you have gone through the entire document above without success, I have recommended to perform a backup and restore of the operating system on your system. To do this, please follow this document on the backup of files (Windows 8) , and more to perform a recovery of the HP (Windows 8) system. This should help to restore your system to its original configuration by the manufacturer.

  If the problem persists, please call our technical support at the 1-800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

  I hope this helps!

  Concerning

• Satellite L510-S432 - Touch Pad has stopped working

  Hi all.

  I bought this laptop last 2 weeks, it works well at first.

  It was once I rebooted the system to reduce some startup programs through msconfig, the touchpad doesn't work. Before the restart, there is a tool bar showing on top there whenever door - press the 'Fn' and now he gone too.
  However, the function "Fn" still work, where I still can control the brightness, the numeric keypad, and etc. through the fair. Fn Fn + F9 key that usually turn on/off the touchpad does not work.

  I had reinstalled the synaptic driver, but still, it did not work. I had activated back all system startup that I had to close, it still does not.
  I try to restore the system, but failed.

  Need help, thanks first to all who help.

  Hello!

  To me it sounds like that, the touchpad is simply disabled with FN + F9 and you will need to activate it.

  I assume that you are using Windows Vista, then you need to reinstall the Toshiba value added Package. You can find it on the Toshiba site. This package is required for the FN keys and other special functions.
  But before installing the new version, you need to remove the old version first.

  An interesting thing: you wrote this system restore failed. What exactly do you have and do you have an error message?

  Good bye