Why msmpeng.exe consumes all the cpu

Similar Questions

• Western Digital My Book Elite treats WDFME. EXE by using all the CPU resources

  System: Dell Studio XPS 435MT / 12 GB of Ram

  Western Digital 1 TB my book Elite external hard drive USB connection

  OS: Windows 7 32/64 bit

  Problem: Computer works fine after reboot/coldboot but after entering Sleep Mode Performance is so slow reboot is required.

  The Windows Task Manager that shows a file associated with the external hard drive (WDFME. (EXE) uses all the resources (100%) in the process.

  Selection (WDFME. (EXE) under the process in Windows Task Manager and ending the process frees up resources and resources in use drops to

  about 10 to 13 percent. I have used this external drive for over a year without this problem until recently.

  I you'd be grateful someone out there with a solution would share.

  Searching the Web for information and or solution, I found that other users have the same problem. Of course, as any material of 'good '.

  company Western Digital chooses to upset their customers by not recognizing that a problem exists.

  Thank you

  Dennis

  I'm having the same problem.  I'm on Windows Vista 64 bit and I can not find a power management tab in the Device Manager either.

  RonRea

  The best solution is to stop using the WD external drive software and install a third party about Acronis backup management is recommended by many people. I downloaded and installed and it seems to do very well and I have my machine is back to run fast.

  -Dennis-

• Why are they not all the photos on my phone on icloud?

  Why are they not all the photos on my phone visible on icloud?

  You have settings > iCloud > iCloud library turned on in the phone? Since how long you turn on this setting? Have you been connected to wi - fi? How many photos is on iCloud and how much is missing?

• failure of the SIM, why I this message all the time?

  failure of the SIM, why I this message all the time?

  This means that your SIM card is defective or otherwise expired

  Can you make and receive calls and texts?

  If so - go out the SIM card - wait about 45 seconds and re insert it back

  If not - contact your carrier for a new SIM card

  Remove or change the SIM card in your iPhone or iPad - Apple Support

• Convert Photos from iPhoto. Why will it erase all the pictures on my computer?  How can I save them?

  Convert Photos from iPhoto. Why will it erase all the pictures on my computer?  How can I save them?

  Why will it erase all the pictures on my computer?  How can I save them?

  You don't have to do anything.  When you open your iPhoto library with the new photo app that the existing library is migrated to a new library of Photos.  However, as with any operation should have a current backup before proceeding.

  

• Windows/Microsoft Update crashes, takes all the CPU can't be fixed by all the recommendations I found

  Windows XP, SP3, it worked fine. Suddenly Windows/Microsoft Update crashes and uses all the CPU while trying to assess what needs to be updated. The only way to stop him is to kill the process.

  A ran Fixit from Microsoft (support.microsoft.com/kb949104), who said that he repaired the window update, but could not fix "problems installing the recent updates. Nothing else was not fixed.

  Problems found

  Recent updates installation problems

  Not fixed

  Fix Windows Update

  Successful

  If I look at the properties of the de...\System32\wuaueng.dll I have the most recent version for XP (7.6.7600.256).

  I know that the support for XP will end this year, but I want to Microsoft Update to work down there.

  Any help appreciated. Thank you

  You are welcome.

  How about that.  Don't you love it when a plan comes together?  Windows updates only or material for pilots also and then update windows is good, but for a more broad ability of other applications Microsoft, then Microsoft Update and Office update is good for a shopping for updates of every Microsoft product you have.

  You suppose wrongly, and I thought I answered this before.  Technically, you can re-enable the automatic updates but that will require you disabling updates every Monday just before black Tuesday and then manually download and install the cumulative security update newly released and restart before you activate the updates automatic (or notifications only) once more.  It is more reliable just disable automatic updates and do not have the headache.  Disable the horse of notification that is displayed in the status bar, and that you don't mind.

  Please mark this thread as a response.  Thank you.

  To not argue the point, but XP users required the kind of brilliant 'support' who gave XP since the time of the IE7 to IE8 'false upgrade' users XP need like a hole in the head.

• WerFault.exe continues running, using all the CPU, despite being switched off

  Although even I turned off the Microsoft error (running Vista Home Premium) report continues to use all CPU, I read a lot of geek and tech stuff after googling the problem and thought that I had found the answer.  I uninstalled a few programs that I did not, and he was glad that the problem has disappeared.  After one episode a week, he started to reproduce.  Even when I open Explorer and Windows Task Manager just. WerFault.exe executes two threads.  All the answers?  I hope of course!  Thank you

  How is your question about the Windows Update feature?

  I think you'd better post instead in one of these forums:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/threads

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why lsass.exe consumes resources after the start?

  Lsass.exe turns 15-20% cpu level for 10-15 minutes after the start.  I have a fast, dual-core machine and the latest XP.

  Hello

  "lsass.exe" is the local security authentication server. It checks the validity of the user on your PC or Server logons. Lsass generates the process responsible for authenticating users for the Winlogon service. This is done by using packages of authentication such as the default, Msgina.dll. If authentication successful, Lsass generates the user access token, which is used to launch the initial shell. Other processes that the user initiates then inherit this token. More information

  Note: The lsass.exe file is located in the C:\Windows\System32 folder. In other cases, lsass.exe is a virus, spyware, Trojan or worm!

  If you suspect a viral activity, and then run Microsoft Security Scanner and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  I hope this helps.

• Svchost.exe consumes 90-100% cpu memory

  When I start my computer there are 5-6 processes svchost.exe and none of them use 90% above the memory of the cpu. There is that one, IE, idle system process that uses more than 90% cpu. But when I turn off my net by right clicking on the icon in the status bar notification area and select Disable, after a while, one of the svchost.exe process begins to consume more than 90% cpu. Also its members use is superior to 40 000 K and my computer responds very slowly.

  Also as soon as I finish this process my computer responds normally.
  Also when I shut down my computer shows blue scree an additional message «closing network connections...» ', this isn't usually comes.
  Please help me...
  Thank you

  Are you now a statement is not a problem.

  1. the amount of memory in the "working set" of a process (10 000 K = 10 MB) should not be a problem for most systems.  Even an old computer running XP probably has at least 512 MB of RAM installed.

  2 PIDs are specific to your system.  Reports that a process has 912 PID doesn't mean anything to anyone else.  The svchost.exe instance you mention hosts most of all instances of svchost services into a Windows XP system (this is the "netsvcs" of services group), is not at all surprising that he needs more memory.

  Buried in this long list of services is wuauserv, which is the Windows Update automatic update service.  It wouldn't surprise me at all if this is the service that used a lot of cycles CPU when you shut down your Internet connection.

  If you 'end process' for this instance of svchost, most of the things that will stop working are related to the network, which may be important to you if you have disconnected your network connection.  Not all, however, are related to the network.  For example, the sound does work more (AudioSrv).

  For more information, go here--> http://www.blackviper.com/service-configurations/black-vipers-windows-xp-x86-32-bit-service-pack-3-service-configurations/ names when you run tasklist/SVC are the "service name" rather than the name, "display" then click on the header in the second column of the table in the Black Viper to sort by service name.  You can click on the "display name" of the any services to learn more on this subject.

• Why I can see all the photos on FaceBook with Explorer and I canoe see some using then?

  When I browse my Facebook using Firefox, I can't see some of the pictures. But when I use Internet EXPLORER I can see all the photos on my FaceBook page. Why is this happening? Magda.

  You are welcome

• ESXi (4.0.0) not to award all the CPU capacity?

  This is my first post of the community - apologies for display on ESXi 3.5, but my problem is with version 4.

  I'm under ESXi 4.0 build 171294 on an HP Proliant DL380 G5 Dual 2.66 Ghz Dual Core CPU with 9 GB of RAM.  I have a bit of exposure to VMWare Workstation and ESX, but its amazing how much you realize that you don't know until you try to build your own.  I send an apology through the cosmos for all those of you who have heard me scream "how the hell people paid so much money to configure ESX?" after the disc in to burst and fits in about 10 minutes.  Karma curly!

  My question:

  Two hearts, two processors clocked at 2.66 Ghz (2666 Mhz) x = 10,664 Ghz or 10 664 Mhz, right?

  For some reason, my application ESXi shows and has ever since wherever it has been installed, available in treatment only 9064 Mhz capacity.  I haven't noticed until I started planning the resource pools to partition my production of the laboratory of my experimental environment servers and started to do the math.

  My host is configured to use the default value of 267 Mhz, and I have attached a few screenshots to support my reasoning.  Has anyone seen this kind of problem before? Y at - it a known bug that I missed during my search?

  Welcome to the Forums - do not forget the vmkernel - ESX/ESXi hypervisor also needs CPU cycles - the 267 reserve ensures that your host has 267 MHz at its disposal all the time - it is not a limit if the host needs more than 267 that he will get it.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Why can't access all the options on the options screen

  Using Firefox 40.0.2 and find that when I try to access the options screen, it shows, but I can't access all the options it contains, including passwords. This has only just begun, so this would indicate a problem with this version. How can I or yoy, solve this problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Why Google knows exactly all the pages I visit?

  I know I use cookies, but where I gave the right to Google to read each cookie in my pc, of all the pages I visit to show me ads?
  Is it written in any of your policies and I do not see?
  Pls advice
  Thank you

  Yes, on the one hand it is through advertising networks as the google-owned https://en.wikipedia.org/wiki/DoubleClick that are embedded on Web sites you visit - however google will record your search history on their default site as explained in resources related by jscher2000 before.

• Why my task manager shows the CPU usage in Windows 7?

  I am running windows 7. Whenever I start my task manager, it shows me the CPU only

  Hi Artis Clark,

  Once you start the Task Manager do the following steps to change the display.

  a. click on the Applications tab.

  (b) the Applications tab displays the status of running programs

  on the computer. To quit, switch to, or start a program.

  Learn more about Task Manager view the link on taskmanager.

• Why iexplorer.exe appears in the Manager of tasks so I have all the windows open?

  I am currently using Mozilla Firefox as my browser and use Internet Explorer only when necessary, but everytime I open the Task Manager I see several process iexplorer.exe with a high percentage of CPU use and memory, even when I'm not on the internet. Sometimes, I also hear the ads running without all open windows, and as soon as I finish this process of his party.

  I'm running on Windows XP Edition family; 32 bit

  I tried everything... firewall is blocked, I have Avira for virus, virus and spyware protection, but nothing seems to work.

  Help, please!

  That did not work either! =(

  This looks like a malware/spyware problem. I would like to see a diversion of this log file. Unfortunately, these newspapers of type is not allowed here. If you wish you can click on the link below, create a free account and post this question in the support section of Virus/Malware. Then I will show you how to create a diversion from this log file and have a look.

  Repair-Bots online