Why my sensors do not work?
I have a single-board RIO and some sensors. I can't have sensors to work. Specifically, the sensors operate, but LabVIEW is not giving me correct values. I checked the PIN values with my multimeter and the sensor works properly.
The façade still says that the sensoroutput is still high, but when I measure on the real axis, the voltage is 15 MV. Even when I connect the PIN directly on a spit of land, it still says its strong (I tried the same thing with a 5v pin and it also gives a high level).
I added a picture of the FPGA code, I used (simple be).
Can someone help me?
Dear milo_unlimited,
Please note that you connected a value Boolean true to the terminal under condition of the while loop; the loop will be run only once.
Best regards
Tags: NI Software
Similar Questions
-
Please tell me why this script does not work with Firefox. It works with Safari. Here is the page that includes the script: www.lionsgatehoa.org/newslettertest.html. Thank you. Tom Engleman
Here's the script in my html document:
< embed src = "News2008Fall.pdf" width = '615' height = '3200' > < / embed > "
Edit: removed # phone
Works for me on Linux.
Your system details list does not display the Adobe Reader plugin, so you'll have to (re) install this program.See:
-
Why my Skype does not work? "KERNEL32.dll".
[The update by the moderator topic title should be more descriptive. Original section title was: "why my Skype does not work:------?']"
It's saying "Fatal error failed to get proc for GetLogicalProcessorInfromation (KERNEL32.dll) address; __ ; someone help me?
You must update your installation of Windows XP to the latest Service Pack 3 (SP3).
-
Tecra A11 - 11L - fingerprint sensor does not work
Hello
I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.You have any ideas?
Berst cordially
Thunder1988You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.
-
My finger print sensor does not work correctly as a drink was spilled on the keyboard. While booting, it automatically "fails" 5 times in a row (without any attempt to slide a finger), and then by default at the entrance of password to boot the disk hard machine.
This is not a problem and all I want to do is disable the finger print sensor, but cannot work out how to do this. I tried to uninstall the driver, who seemed done without any problem, but during the reboot, the sensor still seems active, and always goes through the same process.
Everything else works fine and it's just a minor niggle, but I would like to delete the gene of it me beep 5 times then it does its thing.
Can someone tell me how I turn it off completely?
Thank you.
Did you remove the fingerprint software? If Yes check if some unknown device is listed in Device Manager. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the laptop.
-
Why Apple cards does not work in Saudi Arabia?
Why Apple cards does not work in Saudi Arabia?
Hi msmadi,
I understand you are trying to use cards for Apple in Saudi Arabia, but faced problems. I don't know what questions you are running, but if you want to use a specific feature, it may not be available here. Take a look at the link below to review what features are available with an iOS device using iOS 9.
iOS 9 feature availability
http://www.Apple.com/iOS/feature-availability/Nice day
-
HP Deskjet 1010: Why HP 61xl will not work in HP dj1010?
Why the HP61xl does not work in my printer HP1010?
The HP SureSupply site here says the right cartridge for the 1010 Deskjet is 61, it seems that this printer does not support the 61xl.
-
The fingerprint sensor does not work
Hello, I have reset windows on my laptop and the fingerprint sensor does not work, windows recognize the sensor, but in the Device Manager, windows says there is a problem with the sensor, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Thank you for your attention
I finally found the problem reset the pc thanks for your attention somehow
Good day.
-
I would like to know why my hotmail does not work
I would like to know why my hotmail does not work
Rex
I think it might be a problem with Hotmail right now because I have seen numerous amounts of threads, saying "cannot connect to hotmail. You could post your question Hotmail forums below and they will have probably more information about it.
-
Pavilion dv6 Validity Sensor does not work
Hello..
I reinstalled my Pavilion dv6-3300se, reinstall all drivers. But there is a problem. Validity sensor does not work and SimplePass Identity software is not found, even if I can find (DDK validity sensors) (default programs). I reinstalled it milion times but no use of it.
Althouth I downloaded the latest version from the support page of the drivers on the HP website for my HP Pavilion dv6-3300se, validity sensor no longer works
NEED HELP FAST
Hello
An option to try and install the latest version of SimplePass on the link below.
http://www.EgisTec.com/websitedownload/patch/BioExcess/RELEASE7.1BUILD5.9%20BIOEXCESS7.1B5.0-HP.zip
It is a zipped file. If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the installer - just click with the right button on the zipped file, select 7 - Zip, select extract files and click OK. Setup for SimplePass located in the newly extracted folder. Once the installation is complete, restart the laptop.
Kind regards
DP - K
-
Why CRYSTAL_REPORT program does not work with windows Vista? __
Why CRYSTAL_REPORT program does not work with windows Vista?
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.
See you soon.
Mick Murphy - Microsoft partner
-
Why my pc does not work no matter what .exe? I couldn't even run diagnostics
Why my pc does not work no matter what .exe? I couldn't even run diagnostics
Hi SteliosArmenis,
Thank you for keeping us posted on the State of the question.
I see there is that the antivirus installed on the computer could not detect infections. To ensure that the computer is clean, we can run a thorough scan using Windows Defender in offline mode.
I suggest to download Windows Defender Beta offline to a flash drive, CD, DVD or USB and then perform the steps.
The articles explain how to create a disk and run the scan.
NOTE: the program must not not to be run / run from the office.
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.
Hope the information is useful. If you need help with this problem, feel free to post you question in the forum. We will be happy to help you.
-
Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?
Hello
You receive an error message?
Method 1:
You can update the drivers of graphics cards and check.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 2:
You can also perform a clean boot and check if it works:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base articleYou can also check out the link:
The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
Diagnose problems running DirectX
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX -
HP DM4-2070US fingerprint sensor does not work
I have a HP DM4-2070us, and the sensor does not work. I reinstalled Win 7 Pro 64 bit with all the drivers of HP and all updates from MS, but the HP Simplepass software will not recognize the drive. I uninstalled the driver and Simplepass software and reinstalled both using all versions listed for my model on the support page of the HP drivers. The drive is correctly listed and shows installed in Windows 7 Device Manager. I installed another unit of material Validity Sensor and still the same issue.
Yes, so apparently the software downloads & driver from HP support was insufficient to restore the function of sensor of fingerprint on top a new installation. It's a machine on which someone had partitioned and formatted the drive. I cloned the drive from an another DM4-2070us with the original configuration of the software and then it worked. Thanks for the suggestion.
-
Why the effects do not work on still images.
Why some effects do not work on still images?
As the active camera or earthquake?
It seems to me that to have an earthquake or the busy camera, a series of images will have to be moved by the software. In other words, you need a video clip with separate images. A still is an image.
You might be able to get around that. Place your image in a dedicated project, a video share/export. There will be many executives you need. Report a project like the video rather than as a still. Then you should be able to apply your chosen effects.
I did not had time to try it, but I think it should work.
Bill
Maybe you are looking for
-
Apple UDIF read only compressed (bzip2) in my iMac!
I noticed a new feature added to my iMac: 'Apple UDIF read-only compressed (Bzip2)' What? Why? and how did get there? Why do I need? I think, but not sure it was added after the last updated iTunes (version 12.1) No explanation will be appreciated. P
-
Updating BIOS for Equium A60-181
Hi, according to the toshiba site there is a new update of the BIOS for my laptop.I was wondering is it worth the update, unfortunately, there is no informationprovided regarding the bugfixes or improvements? Also can I use theWindows update tool or
-
Yoga, 13 - audio Bluetooth
Hi all Just bought my Yoga yesterday and am well enjoy. A problem I encountered was when you are trying to pair the Bluetooth to a Belkin A2DP receiver (essentially, it appears as a Bluetooth audio to the computer). Sent to the speaker audio quality
-
Before Panel full-screen when open
Hello, I would like to know if there is a way for LV open a Vi and have the façade fit entirely on-screen, when it is open. Each one that I saved so far, even though this positioning where I thought he would take the entire screen, it opens in as dia
-
toolbarupdateservice.exe sucks CPU every few seconds
Task Mgr shows that toolbarupdateservice.exe is using 99% CPU every few seconds. Just ran http://www.microsoft.com/security/scanner/en-us/default.aspx who has not found any problems. ((previously this program did find and remove partially RegCure af