Why my switch SLM2008 does not recognize my Cisco-AP1262-n-a-k9 devices?
Hello
Both the switch SLM2008 and AP1262n-a-k9 are currently to the factory default.
I can web in the switch of my laptop, but when I connect to one of the 4 AP I'm trying to set up, the switch is not see it.
Any help would be greatly appeciated.
Thank you
Armand
Hi Armand,
AP is the level of the company and the switch is actually small businesses. Normally, you do not mix two levels. But...
To clarify what I referred to above, this switch is 10/100/1000 Mbit / s, full duplex, auto-negotiation. The port settings can be changed manually. Therefore, I suggest to connect to the switch and AP and check the ports on both of them are adapting in configuration. If you have 1000 Mbps on the switch then make sure it matches the access point, if autonegotiation enable on one, then make sure that it is enabled on the other as well. Also, you can try disabling auto-negotiation on the two of them to see if that helps. Ensure that if a full duplex, then the other is also. Basically, if the settings do not match, then they will negotiate a link between them and that seems to be what is happening.
Hopefully it is a little clearer.
Sincerely,
ALENA Patterson
Cisco Small Business Engineer
CCNA
Tags: Cisco Support
Similar Questions
-
Why the MacBook Air does not recognize my Adobe ID?
I have a paid Adobe ID.
I would like to use to install the Adobe CC, I know to be available for a total of two computers.
I am currently using, like many Mac pro.
But there was a problem.
I also have a Macbook air.
MacBook air into account is not active.
ID payment is complete and is active in the MacBook Pro.
Not available for the MacBook Air why?
The MacBook Air does not show the message log on another commitment signed in devices.
Just again once this to tell me, 'make a payment '. But I already paid!
Why the MacBook Air does not recognize my Adobe ID?
-
Why the CC lightroom does not recognize my users folder when you try to import? I can not imaport images in the program. It has worked well in the past
It is an Apple problem. They obviously fixed with a change to iTunes. Download the update on their part.
HAL
-
Why T-bird update does not recognize as before e-mail lists?
The 2 latest updates of T-bird caused problems with my email. The last time, he has changed the way in which she acknowledged that e-mail lists - origin have me take more time to send messages. Update today (v. 32) now does not recognize my valid lists and are not sent to them, unless I open each list, select all addresses and then generate a message. What is going on? Thank you.
I had the same problem, but remove the spaces in the name did the trick... OK the GUY Quit screwing with us!
-
Why vista Media Center does not recognize my card tuner Hauppauge 1850
I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.
Hello
I suggest that you install the latest driver and software from the Web site below and check if it works:
http://www.Hauppauge.com/site/support/support_hvr1800.html
Try to contact the hardware manufacturer for assistance.
Hope this helps,
-
Original title: my windows XP do not recognize an external hard drive.
I have Windows XP... When I try to plug in an external hard drive (with automatic installation of the software and the ability of usb 3.0/2.0), my computer does not recognize the material and gives an "error of malfunctioning of the device.
Hello
1. What is the brand and model of external hard drive?
2. don't you make changes on the computer before this problem?Read the following article that may help you resolve this problem.
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575 -
Why my fingerprint reader does not recognize login screen?
I have a Microsoft Fingerprint Reader and it uses the Digital Persona 2.0 software and until recently was working properly.
Lately I can save a print, the newspaper on my desk and programs such as Yahoo IM and others, but when I try to set up a newspaper in a Web site, I get the error message that "this is NOT a login screen and...» "when there IS a login screen and the software no longer recognizes as such.
I am running Windows XP Pro 32-bit and hope someone has an idea...
Thanks for any help.
Chuck
You would be correct, here. All things FP drive at high level would probably go only in Internet Explorer. I used to prefer Mozilla's Firefox, but last month I switched to Google Chrome and Google Sync does not require a hardware key.
-
Why iTunes 12.4 does not recognize my iphone 6?
After the update my pc iTunes last updated version 12.4, my iphone 6 does not appear on devices to itunes to sinc.
Follow these troubleshooting steps:
-
Why Firefox 32 suddenly does not recognize a certificate?
Firefox 32 says that https://rcmail.secure.ne.jp/rcmail-05/ is not approved:
rcmail. Secure.ne.jp uses an invalid security certificate.
The certificate is not trusted because the issuer certificate is unknown.
(Error code: sec_error_unknown_issuer)Web site identity
Website: rcmail.secure.ne.jp
Owner: This Web site does not provide ownership information.
Verified by: unspecifiedPrivacy & history
I have visited this site before today? Yes, 114 times31 Firefox displays the site very well before today.
Internet Explorer 10 says that everything is confidence today:
SECOM Trust Systems CO LTD
Servision CA
rcmail. Secure.ne.jpOf SECOM certificate by http://www.valicert.com/ and valid from 1999 to 2019.
From Servision also certificate of http://www.valicert.com/ and valid from 2007 to 2017.
rcmail.secure.ne.jpcertificate is issued by Servision and valid from the 2014.01.08 to the 2015.01.16.Hello n0diamond, mozilla removed support of certificates root with RSA key sizes less than 2048 bits for security reasons, SECOM has been one of them.
https://wiki.Mozilla.org/ca:MD5and1024
https://developer.Mozilla.org/en-us/Firefox/releases/32/Site_Compatibility#security -
Why my deskjet 940c does not recognize my black ink cartridge?
Please help; my HP Deskjet 940c is not recognize my black ink cartridge and tried to clean the cartridge. I have tried almost evrything but help would be very appreciated. I am running windows XP.
There are a few steps to help solve this problem located here.
If you tried to change the cartridge and clean the contacts, then you've done several of the steps already in order to answer the question.
You can consider replacing the printer as well if the steps do not fix the issue. Have you considered the available through the Support of HPupgrade program, if the unit is out of warranty?
-
USB does not recognize the Garmin unit. Error "unknown device".
Recently, addition of windows 7 Home premium stopped detecting my garmin unit. Other USB devices such as my ipod work very well. I was able to detect the Garmin only a few times, he would try to install the drivers, but the drivers would not install. The garmin was working a few weeks ago. Here is a list of what I've tried:
- Reset (after all what I try)
- Turn off the computer and leave it unplugged overnight
- Completely uninstall all the drivers and the software associated with the kid.
- manual installation of drivers
- uninstall the unknown device and search for new hardware
- uninstall the unknown device and do a search for legacy hardware (which produces a device does not not (Code 10) error)
- Go back to a restore point before updating the last windows
Please, any help would be much appreciated. I'm decently computer savvy and have always been able to solve any problems that I have. This one had turn me my wheels for days.
Thank you
LHello
Try to connect to your garmin unit on another computer in Windows 7 and check if it is recognized.
See this article to fix the error code 10:
http://support.Microsoft.com/kb/943104/
You can also post this question to the garmin forums to get help.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Switch box does not recognize strings
I'm not going to encompass all of my code because it's something I've been working on people, but essentially, I have a dropdown list where the user can select the position of the text that is created later in the code. Basically, I'm having a problem with the switch statement. I made sure that the dropdowntwo of the var was equal to some string dropdown they select using the alert in the positioning of the function. (ie. If they choose "Lower left" in the drop-down list the variable dropdowntwo = "Bottom Left") For some reason any the switch statement always goes to the default value. Any help is appreciated! Thank you!
var thisComp = app.project.item(1); var midLayer = thisComp.layers[2]; // code later on var mainWindow = new Window("palette", "INSERT PROGRAM NAME", undefined); mainWindow.orientation = "row"; var groupOne = mainWindow.add("group", undefined, "GroupOne"); groupOne.orientation = "column"; var dropdowntwo = panelOne.add("dropdownlist", undefined, ["Bottom Left", "Lower Left", "Bottom Right", "Lower Right"]); dropdowntwo.selection = 1; function positioning(text, comp) { var dropSelection = dropdowntwo.selection; alert(dropSelection); switch(dropSelection){ case "Bottom Left": bottomLeftText(text, comp); break; case "Lower Left": lowerLeftText(text, comp); break; case "Bottom Right": bottomRightText(text, comp); break; case "Lower Right": lowerRightText(text, comp); break; default: lowerRightText(text, comp); break; } }
I have not tested this, but try to change this:
var dropSelection = dropdowntwo.selection;
to do this:
var dropSelection = dropdowntwo.selection.text;
Dan
-
Why the extensions Manager does not recognize what CC version I have?
I have the latest version of all applications of CC 2015. I just tried to install an extension (Flash2SVG), and I get this error:
This extension cannot be installed, it requires Flash version 11 or higher.
This specific extension has been developed to work with CC, and nobody else seems to be reporting a similar issue. I use a new iMac (own) 5 k with specifications top of page.
No idea why this is happening?
Hi Mark,
This might help: "the extension cannot be installed, it requires Flash version 9 or more '
Kind regards
Sheena
-
Why Lightroom 3.3 does not recognize SD card?
I use LR3.3 with Vista 64 bit. Again S95 camera, new Lexar 16 GB SDHC card. LR do not. I can't import pix. (I have not had a problem of import with another camera or card SD or CF.) Ideas?
I would try first with a different card reader/cable/port. In addition, do not use a USB hub. Have you tried to connect your camera directly instead of using a card reader (even if we generally recommend the opposite...)?
Beat
-
Why ADE 4.0 does not recognize my ePub files?
I use Indesign cc 2014. Version 3.0 works very well. The program installs OK. I use windows8.0
When you export to ePub from InDesign CC a dialogue Panel appears called Layout Export Options. The last tab is called display Apps and you can add an Application from there and select ADE 4.00.
Maybe you are looking for
-
Apps, no download or update
I've recently updated to iOS 9.3.1 and dicoveref that my apps cannot download or update. If I click on 'Update' or 'Get', the application will be displayed as "waiting" on the home screen, but will not start to download. I rebooted my iPhone several
-
XON /XOFF (software handshaking Vd hardware handshake)
Hi guys,. I'm trying to pipe data from the microcontroller to the computer using the max232 for RS-232 connection. I have a male DB9 on the board.i only used 2 pins for this goal. (pin 2 and pin5). my questions are these: should 1 - I select any valu
-
I forgot my password for Xbox Live. I made the account about 15 months ago with my cousin and he doesn't remember it no more. I don't know the security answer and we tried the investigation, but he will not recover the password. I need some sort of w
-
My hp psc 1317 all-in-one printer/scanner/copier has developed problems. It's an old printer that I have connected to my new pc hp pavilion g6 for laptop with windows 7 64 bit. Since I replaced the color cartridge it prints a test page whenever the
-
my USB not conectec driver doesn't instal no eror show usb device not shown usb me
My usb device does not show eror conectected lock me eror see the