Why my turn windows firewall it works itself?

Similar Questions

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• I can't turn off my Windows Firewall?

  I can't activate the WF out im stuck at the control panel > system and security > firewall anmd so I can't click on anything :(?

  Hello

  ·         Why are you trying to turn off the Windows Firewall?

  ·         What happens when you try to click on firewall?

  ·         You receive an error message?

  ·         Have you made changes on the computer before this problem?

  ·         What operating system is installed on the computer?

  Step 1:

  I suggest you to see the steps in the below mentioned links and check if this may help.

  If you use Windows XP, see the link below and check if it helps.

  http://support.Microsoft.com/kb/283673

  If you are using Windows Vista, check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  If you use Windows 7, see the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Step 2:

  I suggest you to check the status of clean boot and see if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 and Windows XP

  See the articles below:

  http://support.Microsoft.com/kb/929135

  http://support.Microsoft.com/kb/310353

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How can I turn off my windows firewall in all categories. I mean completely off.

  I can't download my programs because he says there is a firewall that is detected.  I have Norton 360, so I do not have the Windows Firewall.

  See if this helps:-

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  If she please vote as helpful.

  Thank you.

  For future use, the type of problem that you opened a session should go here: -.

  http://answers.Microsoft.com/en-us/Windows/Forum/Security?tab=unanswered

• When I turn the windows firewall of it says that I have no firewall when avasts firewall is enabled

  original title: firewall

  I activated the windows firewall and I have avast internet sercurity silent firewall but when I turn windows firewall it says I have no firewall when avasts firewall is enabled is it ok if I let both on

  Do not use two firewalls at the same time. An exception would be a router with a built-in firewall and a normal firewall.

• Windows firewall won't start, 6801 Code error in the event log viewer

  When I try to start my windows firewall manually it just says that it cannot be run.
  I checked dependencies of firewall are running via services.msc
  (CPP) Remote procedure call is started and set to automatic
  DCOM Server process Launcher also started and set to automatic
  These are the only 2 mentioned in the tree of dependencies.

  Ive tried going into regedit according to the http://forums.techarena.in/vista-security/754147.htm
  But could never find the % query defined values, they have mentioned that only how to make them.

  Program installed Antivirus is ESET 4.0 with firewall.
  Tried to disable all the services start and no microsoft via msconfig services, but the firewall still does not start.

  My system is running Windows Vista Premium.

  I have no idea why the firewall just quit on me, I turned it off when I installed ESET smart security 1-2 years back.
  I've been juggling start services to try to make my computer faster startup could be something I did.
  I even tried their activation at unsuccessfully.

  Im going to do a full analysis of the Virus to see if it could be the culprit, but its highly unlikely it seems.
  No matter which entry of the Forumites here would know it that I really need to get the windows firewall service starts to install my drivers for the new printer I just bought
  (part of his installation required to start the windows firewall to configure, when it fails it cant complete the installation)

  I solved it thnx to DaGreenOne,

  It wasn't enough to just disable the ESET firewall,
  You must completely uninstall the ESET program to the windows firewall to work again.

• Windows Firewall is blocking my FTP?

  I have problems of access to a Web site for File Transfer Protocol (FTP on my computer. It is a network that is used to transfer files from one host to another. I desperately need to use it for changes on my manual to send to my editor. It was working fine until about a month earlier, when all of a sudden I was getting a weird message when I logged in as if by chance, an icon for a Windows Firewall on my computer and I wonder if that is the cause of the problem. I have Norton anti-virus and everyone that I talked to said that I don't need the Windows Firewall. I hope that if I uninstall it, the problem will go away, but when I go to the list of programs in my computer it isn't here! (Isn't that weird?)

  The message I get when I try to log into my FTP is a FTP root with the number.   Can anyone offer any suggestions for me?  Thank you!

  Hello

  Windows 7 all use them the "Application Layer Gateway Service" as an assistant to Active FTP connection. You must make sure that this service is started for Active FTP to work.

  To start:

  a. click the Windows Start button.

  b. Type "services.msc" in the search bar, then press Enter (the Windows Services Panel will pop up).

  c. scroll until you find the "Application Layer Gateway Service".

  d. look at the "Status" column, it should say 'start '.

  e. If not started, double-click on the name of the service to enter its Options Panel.

  f. change the 'Statup Type' drop down to say "automatic".

  g. click the button 'Start '.

  h. click on 'apply '.

  i. click "OK".

  In addition, you cannot uninstall Windows Firewall because it is integrated with Windows 7. Only, you can disable the Windows Firewall.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: You should not turn off Windows Firewall unless you have another firewall enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

• Defender of the window does not work.

  I recently had the Vista antispyware 2012 the virus.  I was able to get rid of it, but now the Defender window does not work.  When I click on the icon I get a pop up msg: "failed to initialize: 0 x 80070006.» The handle is invalid. "How to operate?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/why-does-my-Windows-Defender-not-work/a9c81020-cf8d-4149-8B4B-bc059ecf500a

  But you should also read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  Norton, AVG and McAfee, MSE will disable Windows Defender for dreaming of potential conflicts with their respective programs.

  I hope this helps...

• I don't find Windows Firewall in my list of services. Where and how do I get it back?

  I am running Windows VIsta. I am leaving a program through my Windows Firewall and whenever I double click the firewall icon in the Control Panel, it opens and tells me that I do not use recommended firewall settings and then I click on update settings and he know Windows could not update the settings. Then I click on the Windows Firewall enable or disable the link on the left side and he know "because of a problem not identified, Windows cannot display Windows Firewall settings. I searched and found a comparable discussion topic and opens the window to see what the settings were on it and start it manually if I had to but I can not even find the Windows Firewall Service in the list of services. Where it is and what can do to find it?

  Hello

  Do you have any third-party firewall installed on the computer?

  Method 1:
  Run the tool fixit from the link below and then search for the question.
  Diagnose and automatically fix problems of Windows Firewall service:
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  
  Method 2:
  If you have any third-party firewall on the computer, it can disable the windows firewall. So, you can disable the other third party services that are installed on the computer.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks
  You can also try uninstalling the firewall installed on the computer and check.

  Method 3:
  You can also perform a SFC scan and check.
  SFC: How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 7
  http://support.Microsoft.com/kb/929833

  
  Method 4:
  Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted
  
  See also the link to learn more:
  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

• I can't have the ms firewall to work.

  I can't have the firewall to activate. I checked the services and is running and set to auto. I even restarted. If I'm going to start/control panel/security/firewall status it does nothing.

  Hi Lucie,.

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot start the firewall on your Windows 7 computer. The question could be if dependence of the firewall service is not running or get corrupted. It could also be does not work if there is a file system corruption.

  Two important dependencies allowing execution of the Windows Firewall service are Base filtering engine (BFE) and remote procedure call (RPC), if none of these two services do not work or are missing or damaged Windows firewall stops working.

  Try these steps and see if it helps you to solve the problem.

  Method 1

  Try the steps below to start and check the status of the dependency for the firewall services.

  • Press Windows key + R to open the Run dialog box.
  • In the Run dialog box, type services.msc.
  • Research of Base filtering engine (BFE) and remote procedure call (RPC) service.
  • Right-click on each service and start them if they are not running and make sure that the startup type is automatic.

  Method 2:

  The driver of the authorization (mdsdrv.sys) firewall is a system protected Windows file. Thus, the corruption of the file system could cause this problem. You can run the tool File Checker system and if the file is found to be damaged, it will be replaced.

  The file system check is a utility built into the operating system that will check for the corruption of system files. The sfc/scannow command. (System File Check) analyzes the integrity of all protected operating system files and replaces incorrect versions, damaged, altered, or damaged with correct versions where possible.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  • Go to Start, click all programs and open the Accessories.
  • Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  • In the command prompt, type the following command and press ENTER:

  sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows Firewall error code 0 x 80070424 on windows 8

  When I try to start the Windows Firewall on windows 8, I get the following error: Firewall Windows cannot change some of your settings.  Error code 0 x 80070424.  How can I fix the windows firewall to work again?

  Hello

  Please try the hotfix that is described in the following article to resolve your issue:
  http://www.kapilarya.com/fix-error-0x80070424-Windows-Firewall-cant-change-some-of-your-settings
  Hope this helps, good luck :)

• Why my Windows Firewall keep turn off briefly?

  I just launched a recovery on Pavilion Media Center TV m7470n desktop my father, which has restored XP Media Edition 2005 SP2. I then installed SP3 and use Windows Update to get the latest updates. The system now works fine, but from time to time, I get a popup notification that says that the Windows Firewall is disabled. The popup balloon quickly and when I enter the Security Center Windows Firewall appears as on. I did a full scan with Microsoft Security Essentials and I also tried Trend Micro HouseCall and RootkitBuster. None of the scans showed no threat, but I'm still uncomfortable with the ball of myesterious to appear several times a day. Someone saw?

  Now, I think the HP software that updates the computer was responsible. I tried to get the updates by running the software myself, but he says there is no update available. After a day or two, however, he popped up and told me that several updates were waiting to be installed. After you install the updates from HP, the problem with the Windows Firewall stopped.

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• the Windows Firewall has stopped working

  I tried the system restore to just before it stopped working

  Hi geoffrey,.

  System restore would have been my first suggestion, so that was an excellent choice on your part.  I would try it again maybe a few days earlier just to be safe, he did not start before you really notice or before, it became clear, as it is certainly the simplest answer, but frankly, I doubt that it will be more effective (but who knows - he can come back works perfectly and we are both happy, it was considered).  He also suggested that you know a little about computers, so I can provide instructions that contain everything you need but I will not go into nauseous detail unless you get stuck on a step and then you should post any problem you encounter and I will provide more help.  If you should post, don't forget to answer as many questions and include both the results of the proceedings or reports or copies or screenshots of screen that you can at the same time, so we can work on what to do then if none of this made the turn.

  How do you know if what she has stopped working?  Do you have an error message (if so, what was the full and exact message Word for Word, including all codes)?  You have more than one firewall installed on your system (like that which is part of Norton Internet Security, Comodo, or something else)?  What security programs do you use and that you have installed (all names and versions)?  What version of Windows you are using (for example, 32-bit Vista Business SP2 or other - please be precise otherwise)?  When this occurred and did you a software or a hardware changes (additions, deletions, upgrades or anything like that) since two weeks before the problem (if so, precisely what has been done in as much detail as possible)?

  Do you get this Center security or firewall Windows itself?  If you are using XP, post back with answers given that there is a limit to the options how can I cover without knowing the basic information.  If you use Vista or W7, go to Security Center or action center and check to see if there is a problem with the notification of the firewall or it's on.  If it's not on, it shows the details or links containing information about the problem?  If Yes, go to these links and copy the information and post here, so we can look at.

  Then go into firewall Windows itself (on the left side of the screen) and confirm that there is a problem.  If she too says it is disabled, click on change settings.  Make sure the firewall is turned on - if not turn it on, click on apply and then click OK and confirm that it starts and begins to work.  If it does not start, it provides an error message (If Yes, what is completely and exactly Word for Word with all codes)?  Click Advanced, and verify that all network connections are checked - make if all are not and click OK, then again try to turn on the firewall.

  If this does not work, go to start / Control Panel / Administrative Tools / Services and then highlight the Windows Firewall and click Open.  Click dependencies and go to each of them and make sure they are started and automatic.  Otherwise change it to automatic and start them.  If it is impossible to do, check their dependencies and do the same until you reach the end of the chain of dependence.  Now return to Windows Firewall and make sure that it is set to automatic and started.  Then restart.  When the system returns, return to the service and confirm that the Windows Firewall is started and automatic.

  Now, go into Windows Firewall and again try to launch and see if it lights.  Go to the center of security or Action and check that the firewall is enabled and works.  If so, the problem can be solved.  Just to be sure, restart and check the firewall to ensure that it is on and working.  If so, who should be the one.  But we do not know why it stopped, and if the problem may come back, then we must redouble efforts to find the cause or confirm that there is no problem.  Moreover, if the above did not work and Windows Firewall is still off, here's what you should do in any case.

  Go to start / Control Panel / administrative tools / Event Viewer and look for error messages regarding the Windows Firewall (there will be errors).  Look in system first and then in Applications.  When you find the error or errors, click on it for details, copy these details and display them in your next reply.  Well, they can help us identify the source of the problem and there a fix for it.

  We will check your system and hard disk for corruption files and try to fix it:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Then, we will confirm this is not caused by a malware any.

  Update and run a full scan with no matter what security software you use, and remove or quarantine everything you find.

  First, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  If none of this worked, then after return with answers to ALL the questions above (especially the first paragraph) and the results of all the procedures and the test that you tried in as much detail as possible and with two copies of reports or screenshots (as you prefer).  Without this information, we do not know where to go next without guessing or recommend a more radical proposal that may be required.

  Good luck!

• Windows Firewall and Mcafee won't work?

  I have mcafee antivirus more and everything works on it except for the firewall, when I try to turn on it turns itself after 2 seconds. I tried to turn my windows firewall on and just says cannot change some parameters and then I went to advanced to the firewall settings windows and who says just snap-in failed to load error 0x6D9 code. My computer does not turn off, and it seems to work really slow and just do worse. I'm not sure what I'm supposed to do, but I read on a few other sites that it is a virus, but didn't know if I should trust the websites so I do not download anything. I hope someone can help me and I am ready to do whatever it takes because my computer is only a few years old. Help!

  This is the forum for anti-malware for Microsoft Security Essentials (MSE) program

  Because McAfee is your provider of anti-malware suggest seek you assistance from McAfee Support: http://service.mcafee.com/

  Kind regards...