Why not move this Forum past Page 1

Similar Questions

• Why can I not move this table?

  CS4 on Mac. ID won't allow me to move this table immediately left - it give me the error message saying dashes cannot extend outside the text frame. But I should have 0,1875 "of space to work with.

  

  Your paragraph has an intention of hanging. Amendment of paragraph in a different style (hopefully, you work with styles), where the table is in it and it must be a style with no intention.

• Why not post my newly created pages?

  I just added a new page on my site...

  www.tu.biz/PurchaseOrderForm.html

  I created the page and re - publish Web site, but there is nothing on the internet.

  Why can't the page?   It usually takes seconds to display the new page, but it's not to publish new pages at all...

  In design mode, check if the page is marked for export:

  

  Thank you

  Sanjit

• Why can't copy and paste pictures into folders "Images".

  Any time that I try to copy an image for internet and paste them to my 'Images' folder, it won't let me paste

  Hi kgreer96,

  Why not try this method of saving Web page image recommended?
  Give it a shot and post if it passes.

  1. open Internet Explorer by clicking the Start button. In the search box, type Internet Explorer, and then in the list of results, click Internet Explorer.
  2. navigate to a Web page with an image you want to save.
  3 right click on the image.
  4. click on save image as.
  5. in the Save Picture dialog box, navigate to the picture library, and then click Save.

  Information available at:
  
  Save an image on a Web page
  http://Windows.Microsoft.com/en-us/Windows7/save-a-picture-from-a-webpage

  This operation gives the desired result to save the image of the Web page. Let us know if you need more assistance.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Anyone think that this forum is an improvement?

  The previous Web Forum/NNTP interface was about 90% of the questions coming from this forum and 90% of correct answers for most of the newgroup NNTP users.

  Users of the newsgroup will most of the time NOT to use this web site for the forum.

  so, for the most part of 50 or 100 people who tried to offer help every day, which is not "in there" and not participate not because this forum interface is just slow and clumsy and flashy. We just want the TEXT. NNTP. WORDS.

  I was ACE and as long as I can remember of TMM. Not to renew.

  But you always asked in this thread, just like the other user.  Give people a chance to get used to the new forum before starting to sprout on how things should be done.

  The question was asked to bring David to the substance of this forum - not to pollute a discussion which is already his place in it.  Llke anyone, David is a creature of habit.  Unlike everyone else, he occupies a position of leadership in this forum and others and must be informed of the bad example it sets itself.

  Nadia Perré wrote:

  I'm sure that people probably wouldn't mind not answering these types of questions, they did in the past. There comes a time however, when a person exaggerates the "demand" and may never get an answer that suits them.  How long require you the same or similar question however (I vaguely remember ask you that while NNTP was still alive).

  I think you have confused me with someone else, as I began to experiment with rounded corners, only a few days ago.  If the answer to my questions on their use is an indication of knowledge of the forum about this, so I already did an important contribution at each additional entry in my original post.

  Nadia Perré wrote:

  If you can't find the answer here, try alternative forums, you say you've found, I don't know they will enjoy having you: Pei

  I'm sorry, but the expression: Pei is not part of my technical vocabulary.

  Roddy

• Why my HP printer does not print gibberish when I try to print information from this forum?

  Why my HP printer prints on gibberish when I try to print information from this forum and how do I fix this?

  Hi there dafoster,

  I recommend trying another web browser to print for beginners, that the issue could be the browser.

  If this does not help, I would uninstall the printer driver and put it back.

  Here are links to help with uninstalling: uninstalling the printer software

  Reinstall: e-all-in-one printer, HP Photosmart 7525 drivers

  Make sure that you restart your computer after uninstalling.

  I hope this helps!

  Take care

• Why does not one of this dokument indesign pages follow the position of the master page?

  Why does not one of this dokument indesign pages follow the position of the master page? See photo.

  Use your tool page and drag one to the top.

  

  Or select both and use the alignment icons in the control panel

  

• Discovered that I can't attend Photoshop World Expo unless I have sign up for PSW and pay for classes. I have attended the past 2 years and have learned a lot about the mini classes at the Expo, so why I'm not welcome this year?

  Discovered that I can't attend Photoshop World Expo unless I have sign up for PSW and pay for classes. I have attended the past 2 years and have learned a lot about the mini classes at the Expo, so why I'm not welcome this year?

  Hi Thomas,

  I'm afraid that you ask in the wrong place. Photoshop World is organized by Kelby Media, and the web site is

  http://PhotoshopWorld.com/

  On this site, there are a few suggestions (e-mail and telephone) contact:

  

  I hope this helps!

  Mike

• I've updated Adobe Flash to 15.0.0152 via the system of preferences update in the Flash icon. But no DMG file has been downloaded. This never happened in the past. Why not?

  I've updated Adobe Flash to 15.0.0152 via the system of preferences update in the Flash icon. But no DMG file has been downloaded. This never happened in the past... Why not?

  Since your any question related to an external site and does not clearly represent the destination of the link, I have the irreversible.

  For completeness, here is the link to zero Google announcement that you referenced.

  Google online security blog: project announcing zero

  In case you weren't aware, our engineering organization works closely with zero Google and many other partners in industry and universities to make sure that we are adapting to the latest threats in the two emerging research and in the real world and the security of end users is of paramount concern.

  To answer your specific questions, when you update for Flash Player native to the Panel, we provide a streamlined workflow that downloads the installer to a temporary directory, run it and finally deletes it at the end.

  If you are not comfortable with this mechanism and want more visibility and control over the installation process, you can always download the installer directly from http://get.adobe.com/flashplayer and install manually.

• Why Microsoft is not resolved this problem?

  Why Microsoft is not resolved this problem?

  Is the signature problem in instead of disconnection?

  The problem you have is more properly treated in a Windows Live Forum and not a Forum for Vista.
  http://windowslivehelp.com/forums.aspx?ForumID=b782602b-8e7c-40D8-a66b-b44824497a17

  Most of the contributors here are users who volunteer to try to help others with their problems. Even Microsoft support engineers are only there to help the process along the way. These forums are not able to pass on complaints from Microsoft bugs. When other users agree you will get their support, but nobody here can influence Microsoft to take action.

  If a complaint relates to the operation of Microsoft Answers you can post on the Forums of Feedback responses (see bottom of page) and they can get a response. I've recently complained of does not automatically stay connected and obtained a recognition that there have been problems.

• Why my Burger moves down on the page?

  Hello world

  I've never had this happen before with a hamburger in an Accordion widget.

  The hamburger/accordion/vertical menu works perfectly in the Master Page.

  It moves on the other pages.

  I can't really understand why he does not stick up... and I'm sure there's an easy answer!

  Anyone know? Screenshots are below.

  Thank you!

  ............... It is the Master Page.

  

  ............ This is one of my pages and you can see to the bottom, it's moving...

  

  Did you accidentally it marked as an element of footer?

  Anna

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• When I open firefox, it does not start on my home page, but on a search page, I never intentionally downloaded and uninstalled from my computer. Why?

  Today, I had a lot of trouble with my computer. I think that he was attacked by something underhanded, but I managed to stop it and fix everything. Everything about this thing.

  When I open the firefox browser, it will not automatically to my home page, despite having followed all the instructions to do this. Instead, it opens in an engine search called 'awesomehp' that, previously, never heard and never installed. When I click on the 'home' - button, it goes to my real home page, and everything is ok.

  I tried to uninstall it... "awesomehp" engine of research, but it ALWAYS appears automatically when I open FireFox. Why? And this is even after I have reset FireFox settings by default once.

  Why this happens, and what can I do about it?

  Looks like you picked up a pirate of the page. See this for help to get rid of it:
  
  http://www.bleepingcomputer.com/virus-removal/remove-awesomehp.com-browser-hijacker

• Why Firefox takes me to a page that says: "Oops Page cannot be found" when I click on a link in a secure site. Not with IE: only Firefox.

  If I go to a secure site and click on a link, it take me to "Oops Page cannot be found". I have reset Firefox, uninstalled and re installed, disabled my Add Ons and any other suggestions for the forum. Nothing works and that this does not happen with IE. Is the bottom line that I have to use IE for these sites? I prefer Firefox but can not solve this problem.

  You found, buddy. It was my AVG Security Toolbar. My computer will be vulnerable to the virus if it is disabled?

  Once again, thank you very much for your time.

  KUDOS to THE MODERATOR that solved the problem.

• not able to locate the link HERE, in this FORUM mozilla firefox, change my password HERE. How can I change my password for mozilla help forum (only one)?

  I want to be part of this mozilla firefox support community forum. That's what I call it: a help forum. but it's sorta a little ironic, don't you think (?) that I'm not able to change my password, here, on this forum.

  do you know how I can change my password for THIS website in mozilla firefox help? There is no link that takes me to this particular thing. It is not available in all the links that are related to my profile. If I can not log on in the future, what good is to join?

  Bellissimo! I am so grateful. It worked! I might suggest that a link to change your password is immediately visible at the top of page for new members of this forum.

  I am also very grateful with the rigor that you put into your response, because it gives me the way to mark this issue as being resolved, too. Be healthy and happy!