Why 'other' on my mac continue to increase when I delete things?

Similar Questions

• Portege R930 brightness increases when the shiny things are displayed

  I use a Portege R930 with the 2nd lowest brightness. I noticed that when something bright is displayed, the overall screen brightness adjusted upwards by about 5 tiny slices to speed increment of 1 / second.

  Increments of brightness are not nearly as pronounced as the steps in the brightness slider, but it's there. And very annoying.
  I can't find any mention of this 'feature' online. Is it possible to disable it?

  Hello

  I put t know if your laptop was equipped with the graphics card AMD but the problem, you take it all sounds a bit like a future provided by AMD GPU called: AMD vari-bright.
  Vari-bright save energy consumption by optimising contrast image on the internal LCD screen AMD computers.

  This feature can be used if the computer is running in battery mode, using the internal LCD only or PowerPlay settings under mode battery is set to maximize autonomy.

  The Vari-Bright feature can be turned on and off in CCC.

• After the removal of Windows 10, why do I see Mac HD and Bootcam

  I deleted Windows 10 of my MacBook Pro (version 2009). Now, why do I see two disk: 60 GB Bootcamp and Macintosh HD 99 GB? I expected to see only o

  Hello waxwingDr,

  I understand that you deleted Windows 10, but are still trying to see the drive Bootcamp on your Mac. Let's see if we can understand what is happening.

  The question I have is how did you remove the Windows of your Mac partition. Let me know if you did the following steps, described below.

  If you installed Windows on a drive with multiple partitions

  1. Start your Mac in OS X.
  2. Quit open applications and log out all users.
  3. Open Boot Camp Assistant, and then click on continue.
  4. Select "remove Windows 7 or later", then click on continue.
  5. Do one of the following:
     • If your Mac has a single drive internal, click on restore.
     • If your Mac has several internal drives, the Windows disk, select 'Restore the disk to a single OS X partition' Select to continue.

  Boot Camp: Remove Windows from your Mac
  https://support.Apple.com/kb/PH17861

  There are other ways to correct if you see always the two partitions. Take a look at the following article below that passes on the partitioning of a hard disk. It will be an option to delete a partition and expand your main Partition of Mac.

  Disk utility (El Capitan): partitioning a physical disk
  https://support.Apple.com/kb/PH22240

  Expand a volume

  If you have several volumes on a device, and one of them is running out of space, you will be able to expand without losing the files it contains.

  To enlarge a volume, you must delete the volume that comes after him on the device, and then move the end point of the volume you want to enlarge in the freed space. You cannot expand the last volume on a device.

  WARNING: When you delete a volume, all data thereon is erased. Don't forget to back up your data before you start.

  1. In the sidebar, select the device that contains the volume you want to enlarge, and then click the Partition button .

  2. In the diagram on the left, select the volume you want to delete, and then click the button Delete .

  3. Click on apply.

     The volume is deleted, reformatted, and all the free space is assigned to the previous volume.

  4. Click done.

  Let me know if it helps.

  Take care

• Sounds continue to increase everything by playing games

  Original title: Windows 7 sounds continue to increase

  During the last week, I noticed a problem that appears.  During games my noise level will gradually increase of his own volition.

  Most of my games is centered around the steam client and during the game, he will sometimes change.  I keep my windows to noise levels on 38-40 using my headphones Roccat Kaye.  Then of course when he suddenly pulled up to 100% it is very strong.

  I noticed that Windows 7 seems to have this problem, but most of the people are reporting in contrast, with a decrease in sound.  I tried to look for and try the suggestions but nothing works.  Y at - it a patch or hotfix due?

  I use Windows 7 64-bit Edition home premium.

  Hello... Thanks for your response

  Speaker Fill (healthy Option) does not work with several sound cards (any sound card and driver Win7 compatibility)

  For example:
  Realtek:
  ALS 890
  ALC 889 has
  ALC 888
  and other

  SoundMax:

  AD1980

  AD1988A

  and other

  Re-install reinstall the sound card in Device Manager, and she now has sound works perfectly. No problem at all... Thank you

• Now I have a new mac and me, I bought a previous CS5 - can´t find my product - even when I m connected... How? Why? I have my serial number, but when I try it fails...

  Now I have a new mac and me, I bought a previous CS5 - can´t find my product - even when I m connected... How? Why? I have my serial number, but when I try it fails...

  You do not have a serial number to download, so I think you're talking about installation AFTER downloading the file (s)

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• ORA_ROWSCN continues to increase without any DML

  Hi Experts,
  
  I use ORA_ROWSCN in ETL for the incremental data capture.
  Problem is that the ORA_ROWSCN continue to increase for some table without any DML.
  Table have ROWDEPENDENCIES.
  There is no audit, trigger, or batch running on the tables.
  Database is 11.2.0.3 on Windows 64 bit OS.
  ETLs perform DML heavy overnight. During the day, max (ORA_ROWSCN) continues to rise for a few tables.
  
  I noticed that during the questioning of a few paintings, SCN_TO_TIMESTAMP (max (ORA_ROWSCN)) has shown the current timestamp.
  
  Can cause the "delayed block drain plug" this?
  If this is not the case, is it then any other bug cause or identified?
  Is there enough reliable ORA_ROWSCN?
  
  Thank you
  Santosh kumar

  Welcome to the forum!
  >
  I use ORA_ROWSCN in ETL for the incremental data capture.
  Problem is that the ORA_ROWSCN continue to increase for some table without any DML.
  Table have ROWDEPENDENCIES.
  There is no audit, trigger, or batch running on the tables.
  Database is 11.2.0.3 on Windows 64 bit OS.
  ETLs perform DML heavy overnight. During the day, max (ORA_ROWSCN) continues to rise for a few tables.

  I noticed that during the questioning of a few paintings, SCN_TO_TIMESTAMP (max (ORA_ROWSCN)) has shown the current timestamp.

  Can cause the "delayed block drain plug" this?
  If this is not the case, is it then any other bug cause or identified?
  Is there enough reliable ORA_ROWSCN?
  >
  Congrats on being one of the few to ask a question which is, as Arte Johnson (of Laugh-In fame) would say, "very interesting".

  Unfortunately for us, you have also provided your own answer! ;)

  Drain plug can cause that? Yes - one of the oddities of the drain plug delay block even with a table by using ROWDEPENDENCIES is that Oracle may not always determine the exact SCN and therefore can use slightly more high when finished.

  Reliable? Yes - ORA_ROWSCN is reliable enough. But, as you will see, you must force the Oracle to drain plug blocks before use ORA_ROWSCN to query the changes.

  The best discussion, which includes the code example, is on the site of challenge from PL/SQL to a fault, a year or two it is
  "Impact of the Serializable Transaction not seen by players (9622).
  http://PLSQL-challenge.blogspot.com/2012/01/rowdependencies-impact-not-seen-by.html

  Anyone with enough interest should read the entire article, long and many answers. You will find them VERY informative. I suggest you add this bookmark to your "Oracle Toolbox.

  I included only a short extract conclusions regarding your question here and the code example illustrating the it.
  >
  Smail:

  I wonder if the ROWDEPENDENCIES guarantees 100% accuracy
  ORA_ROWSCN for each line.
  As far as I understand it, it can still generate false positives, but much less, because each row has its own ORA_ROWSCN that is NOT affected if other lines in the block are updated or locked/jerks, but still can be slightly higher than that of true to the line itself when Oracle it cannot determine precisely when cleaning
  >
  And the answer with the code
  >
  _Nikotin:

  but maybe still slightly higher than that of true to the line itself when Oracle it cannot determine precisely when cleaning.

  Yes, here is the example of the impact of the delay block drain plug:

  drop table plch_test;
  drop table plch_test2;

  create table plch_test (number, varchar2 (100) tilte, number of val) rowdependencies;

  Start
  insert into plch_test values (1, 'creation and validation at level 1', 0);
  insert into plch_test values (2, 'to update and commit to step 2', 0);
  commit;
  end;
  /

  update the value val = 1 plch_test where a = 2;

  change the built-in system buffer_cache;

  commit;

  create table plch_test2 (number, varchar2 (100) tilte, number of val) rowdependencies;

  Start
  insert into plch_test2 values (3, 'create and commit to step 3', 0);
  insert into plch_test2 values (4, 'to update and commit 1e5 times in step 4', 0);
  commit;
  end;
  /

  Start
  because me in 1... loop 1E5
  Update plch_test2 the value val = val + 1 where a = 4;
  commit;
  end loop;
  end;
  /

  Select t.*, Yvert plch_test2 ora_rowscn t
  Union of all the
  Select t.*, plch_test ora_rowscn t
  order by SNA;

  After that, you can see that steps 2 and 3 are reversed in the query result:

  SQL > select t.*, Yvert plch_test2 ora_rowscn t
  2 Union all the
  3. Select t.*, plch_test ora_rowscn t
  4 order of SNA;

  A VAL TILTE SNA
  ---------- -------------------------------------------- ---------- ----------
  1. create and validation, to 1 0 1998971227 step
  3. create and validation, to step 3 0 1998971254
  2 update and validation, 2 1 1999009794 step
  4 update and commit times in step 4 100000 1999224125 1e5
  >
  You can see from the above result to the effect that you get

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Why my screensaver pop up continuously when I am in the middle of something and so I have to log in again?

  Why my screensaver pop up continuously when I am in the middle of something and if I click on new in the program fast enough, I have to reconnect. It gets really annoying. Help, please.

  I tried the 'clean boot' thing, but it did not help. I continued to explore all the options I could think & I think I finally got. I might be a little embarrassed of it's a simple thing, it turned out, if I considered myself more ' compatible computer, but I "don ' t... so I'm not." In any case, just to let you know, because I appreciate you taking the time to help me, this is the 'waiting time' & 'on RESUME, display logon screen"in the"settings screen saver box. I had fixed in 1 min. & I had the "on RESUME" box checked. I've been playing with it a few days when I was changing my "background theme". Anyway, thanks a lot for taking the time :)

• I bought a student permit and I guess use two devices, one in my pc and the other in the mac... maybe in the fact that I did a migration of a disc my pc and your server had counted twice... (?) Please let me know regards Edoardo

  I bought a student permit and I suppose to use on two devicesone in my pc and the other in the mac... maybe, I did a migration of a disk in my pc and your server had counted twice... (?) Please let me know regards Edoardo

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  Sign in your account of cloud on computer A or B to be able to use on computer C

  -via https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Storage - EMC or NetApp training? -What is the opinion which continue to increase identification of Collect information?

  Storage - EMC or NetApp training? -What is the opinion which continue to increase identification of Collect information?

  I get a lot of job opportunities for VCPs with storage capacities. I work with the directors of storage on all commitments but don't go or experience. Which storage certification I should continue to allow me to work as a PCV with extra storage responsibilities? My experience has been with EMC, NetApp and 3Parr on fiber, NFS, and iSCSI. What training and certification provider would be better or at least the first to continue?

  Thxs

  Both are huge players in the world of virtualization and thus increase your VCP - I would lean more towards the EMC cert just because of the VCE (VMware, CIsco and EMC) company

• When I compose new emails, font sizes continue to increase.

  My email has been hacked or otherwise tampered with, a few weeks ago. I changed the password of my Yahoo email address; This action appeared to solve the problem. However, I have now the problem of police-size-increase when sending new emails. This problem does not occur normally when I click on 'Reply to sender'.

  Thank you for your answer to my question. Before receiving it, I had the problem solved.
  Leif Schaumann (Oct 21, 14)

• "Terminal" continues to display when I turn on my macbook

  I would like to know why "Terminal" continues to display when I turn on

  Check the  > System Preferences > users & groups

  Go to your account and click on the login items

  an entry for the terminal or a request can be triggered this at startup.

  Then check your Macintosh HD/Library/StartupItems

  Look for the same thing.

  It appear and disappear or it remains upward? Y at - it info when it is open? You can attach a screenshot?

• why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  Hi James,

  Let us know a few details about the issue.

  1. which operating system you have installed on the computer?

  2. what web browser do you use to open itv player?

  3. are you able to play other videos online on other sites?

  If you use Internet Explorer, then you follow these methods.

  Method 1:

  You can run the fix for video problems in Internet Explorer.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 2:

  You can also follow the steps in the following article and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

  Feel free to get back to us for other queries.

• My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

  Best regards, David

• Why is it when I delete a music file in media player that it won't disappear

  Why is it when I delete some music files on windows media player that they won't go away?

  Hello billyvidrine,
   
   
  Thank you for the question!

  It is disheartening to know that have problems you with Windows Media Player. As I understand it, you are not able to remove Windows Media Player music files.

  I need to ask you some questions to help you best.

  1. do you get an error message when you try to delete the music files?

  2. were there any changes (hardware or software) to the computer before the show?

  This problem occurs if the Windows Media Player library database is corrupted. Try these steps and check the result.

  
  Method 1: Clear the Windows Media Player database
  has. click on Start > type run > click run > Type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  b. Select all files in the folder and then click on Delete on the file menu.
  
  Note: You don't have to remove the folders that are in this folder.
  
  c. restart Windows Media Player.
  
  Note: Windows Media Player automatically rebuilds the database.
   
  Method 2: If the problem persists, delete the Windows Media Player database cache files
  
  a. click on Start > type run > click Run > type % LOCALAPPDATA%\Microsoft , and then click OK.
  b. Select the folder Media Playerand then click on Delete on the file menu.
  c. restart Windows Media Player.
  Note: Windows Media Player automatically rebuilds the database.
  
  d. check if the problem persists.
   
   

  Meet us if you encounter problems with Windows Media Player or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

   
   
  Hope this information helps.