My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?


Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

Best regards, David

Tags: HP Printers

Similar Questions

  • ENVY 100 series D410: Envy 100 D410 series will not scan with Mac OS Sierra 10.12

    Hello, I just bought a new Mac, and I have the Mac OS Sierra 10.12

    The printer works fine but I can't scan.

    I do not have the scanner HP 3 that previously had on my other computer and I don't have the installation CD.

    I can't find the software online. He said that HP still has the software to make it work, but I can't.

    I tried the HP Easy Scan but I need the previous software that I don't.

    What can I do?

    Thank you



    Welcome to the HP Forums, it's a great place to get help, find answers and advice,
    Thanks for posting your request, I'll be more than happy to help you

    If I understand the scan does not work on the BONE of the Sierra.

    Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

    • Image capture
    • Overview
    • Printers and Fax preferences in system preferences
    • Scanner / printer queue

    The basics of the Mac: using a scanner

    I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

    For links related, please here.

    To troubleshoot the macOS Sierra problems: click here

    If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
    Good luck.

  • Suggestions on how to work with Mac Yosemite 10.10.5 the CS4 Design Premium?  Thank you!

    Suggestions on how to work with Mac Yosemite 10.10.5 the CS4 Design Premium?  Thank you!  I hate to have to spend hundreds of dollars to make the work of Design Premium with my new IMac.

    There must be a way to work it.  Thank you!

  • When will the new raw update for Adobe Lightroom 4 with support Nikon D750 version come?

    Hello Adobe,

    When will the new raw update for Adobe Lightroom 4 with support Nikon D750 version come?

    Best regards


    There will be an update to Lightroom 4. The only way that you can work with your raw D750 files is to use the autonomous and free DNG Converter to create DNG copies. If you want to be able to work on the NEF files, then you must upgrade to Lightroom 5. Lightroom does not use plug in Camera Raw. everything is part of the Lightroom program. If you want to stay up-to-date with Lightroom, you must follow the path of update/upgrade. This means than buying each new major version of Lightroom or you subscribe to plan creative cloud.

  • Color LaserJet MFP M177fw Pro: Scan to Mac with Color LaserJet MFP M177fw Pro

    I bought and the latest drivers from hp installation a HP Color LaserJet Pro MFP M177fw. are downloaded and installed.

    I have a Mac and you connect wirelessly to the printer, which works very well. The Mac runs Yosemite 10.10.3

    My question is the digitization. There is no option for scanning anywhere, not on the small screen of the printer not on the usefulness of the printer or any where.

    Summer spend hours online to find an answer and is now well bored.

    I have already reset the disc printing, verified and repaired systems. Can not scan even with the options offered on the forums of hp using Apple caprure or preview. It seems that all these options include versions of OS X prior to Yosemite?

    I buy a multifunction printer that is not scan? I said to the saleswoman that I need a printer that can scan and airprint...

    Is it possible to scan to a mac at all with this printer? Any help?

    Hi @sa9494,

    I see that you have problems with scanning. I will definitely do my best to help you.

    Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
    Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Color LaserJet MFP M177fw Pro)

    If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

    Here is a screenshot of what it should look like. You have the scanning through top tab?

    I have also included a document for HP printers - scan with HP Software in OS X v10.10 Yosemite.

    Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

    Connect the printer with the USB cable, to see if you have the same results.

    Let me know.

    If you appreciate my efforts, please click on the "Thumbs up" button below.
    If you have any questions, please let me know what steps you have taken and the results. Thank you.

  • Scanning with Mac desk jet F2235 all-in-one

    Hello! I inherited this all-in-one deskjet. I have a Mac with OS X air 10.7.5, connected the printer directly to it. As usual, she immediately identified software and used (this time for 2000 series printers). His print perfectly. BUT it is not the scanner. If I press the button scan in the printer flashes some time and nothing happens. And in the mac driver it doesn't seem to be a facility for scanning, only for printing. The scanner itself does not work. I have chenged the cartridges and he asked to scan the Kaleidoscope page and it worked. It also analyzes to make copies.

    I appreciate any help! I need to analyze something urgently! As it has been so well printing, I assumed sweeping would simply be too easy. Thank you!

    Welcome to the @ManaCamacho forums.

    I read your post about scanning with your Deskjet F2235 and Mac OS X 10.7.5. As you have noticed, there are no drivers available for your printer with 10.7 model, i.e. There is no software of scans included (Deskjet F2235 drivers).

    However, this link can help you analyze without using HP software: Deskjet F2235 and Mac OS X 10.7

    Some information of the 10.8 Guide can help out too: how Scan: 10.8

    Have a wonderful Wednesday

  • HP Photo Smart D5110 will not scan with Mac OS 10.9

    Help. I've looked everywhere and can't always come up with a solution to scan from my Photosmart. Worked fine until I upgraded to Maverick. Thank you!

    WelchSHello and welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you are looking in your scanning options. I would try to help.

    Due to the age of the printer, there is no HP software for this printer on Mavericks.  You can, however, use the characters of basic Mac OS and drivers to scan.  I'm including a document on the installation and using the printer on a Macthat should help you to solve this particular section of the document titled "How to scan with Apple software update driver?"

    Please let me know if you have any questions.  Thanks for posting on the HP Forums!

  • Scanning with Mac OS 10.6.1 and C4780


    I have a MacBook Pro with Mac OS 10.6.1 and just bought a HP Photosmart C4780.  I can print and copy documents very well.  The problem is when I try to scan documents.  If I use the button on the C4780 an error message is displayed.  If I use HP Photosmart Studio and use the scan key a scanner is not detected.  On the other hand, when I go to 'System Preferences' and 'Printer & Fax' the C4780 appears.  When I press the scan button, the scanner will work, but I am now using MacBook Pro software and the HP software not... any suggestions?

    I printed a wireless network Test report and any specified summary diagnosis was a 'PASS '.  In addition, I does not use a USB connection, but thanks to my wireless network.

    Bottom Line: I can scan documents using software MacBook Pro, but not the HP software.  Work of printer and copier.

    After posting this message I tried to update my computer and I received an update from HP.  After you install the update, all functions on my HP Photosmart C4780 work.
    Message edited by Triusaf on 09/16/2009 18:05

    If you are using Snow Leopard: If you have loaded the software from the CD for the printer HP and unless your CD says it supports in particular 10.6 Snow Leopard, you need to uninstall the software by using the "scrubber":

    Go to Applications/Hewlett Packard / click Uninstall HP
    Click on continue
    Highlight your device in the left pane
    Hold down the Ctrl and Opt Cmd and click on uninstall
    There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
    Click on continue and let it finish

    Restart your Mac

    Now run a software update.

    Then, remove and reinstall the printer in System Preferences, Print & Fax.

  • PSC 2410 will not scan with mac 10.6.2 snow leopard

    I have read several posts; have tried to uninstall all the hp software (ran the uninstall) but my computer still sees and impressions, but not matter what it doesn't scan!

    Your 2410 is maybe defective.  Reset it by holding the # and 6 keys while turning.




    gh_nayak wrote:



    Dear Sir.

    I filed a complaint on 22/10/2015 rtegarding scaneer error12 and there is no relpy on your part. Please take care of the material and the urgent.otherwise you can collect the spoiled your printer of business and repay the money as soon as possible

    g h long



  • Digitization of C6180 problem with Mac & Lion

    I have a macbook pro with lion installed. I have a hp c6180 all-in-one. It prints, but will not scan. This message appears: error: Sorry, scanner could not be initialized. Scanner not found. What can I do to fix this?

    Was the HP software on your Mac before moving on to Lion?  How is the printer connected?  If by make sure you USB, it does not via a USB hub.

  • New update of Flash Player always not right with Mac Lion


    I have updated my software to the latest flash player this morning after having had problems with the old flash player since I have upgraded to Mac Lion a couple of weeks. Fortunately, the new software addresses the problem of not being able to click in the box setting wee that appears, which is all fixed now, but I have still a problem with my mouse disappears when you use the flash player.  I can get it come back by moving the cursor of the mouse on the flash content, but its very frustrating to have to do this every two seconds when you try to play games online.  Just wondering is there anything that I am missing, perhaps a setting that I could change something it would do better, all my software is up to date on my macbook and everything works fine, just flash it seems to be a problem with.



    Can you give our Flash Player 11 rc a try and see if it improves something?

    Thank you


  • Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

    My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

    As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

    So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

    As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

    HP should really study this fault

    In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

    Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

    Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

    But no, everything was fine

    Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

    I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

    But after the update for the application of iRST version Intel (the newest HP of) version (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

    I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

    But what I know is that Intel has resolved a number of issues in the version driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version HP has on its support page for the Z210.

    And HP seems unwavering in his lack of interest in the Intels test pilot and then make it available on its support page for what is a product still under warranty

    It is a mediocre service if you ask me...

    Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

    I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

    PS: Add this post so I can mark the thread as solved.

  • Filled with vmware vcp510 review, when will I receive the print version of the certificate?

    Filled with vmware vcp510 exam yesterday... The digital copy of the certificate is available in mytranscript... When will I receive the hard copy of vmware technical certificate will team warn me?

    You will not receive a printed copy sent to VMware.  You can log into your account and print the digital copy, you received.

    Here's the announcement from VMware education thereon-

    Please check the useful and accurate.

  • OfficeJet 6500 not scan with Mac OS 10.6

    My new Officejet 6500 prints fine from my Mac, either through wired connections and wireless, but I can't scan at all. Where should I look and what I should try? The printer is not even appear on my Mac, except via the menu of the printer in different aps. I'm a new Mac user, recently conversion from a PC, which I'm sure that helps. I'm not a geek, then please use the very simple and basic terms.

    Can I return the 6500 to the store for a refund until Monday (7/5), and if I can't get things to work until then, well, that's what I'll do.

    Thank you!

    We will restore the print system:

    -Sys Prefs, Print & Fax
    -Right (Ctrl) click the box of the print queue and select Reset Printing System. WARNING - This will remove ALL your printers!
    -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

    If that doesn't work, tell me where you got the HP software for your printer.

Maybe you are looking for