Why output creates as *. GIF?

Similar Questions

• How separate and rotate the pieces of an object to create a GIF file in after affects?

  Here is the image that I work with...

  I want to make this object rotation 90 ° tight in After Effects and then separate. If you're wondering why I put this up in Photoshop, it's because I need to have this model in most other 2, and half top from the bottom half and button, both turned 90 degrees [preference to the right] in order to create the GIF. I need these 3 pieces before I can even consider to create the GIF in After Effects... so if someone either wants to try and do for me or to try and help me do mine, either one would be extremely useful

  Don't worry not guys, I actually found the answer on my own what I needed was to split the image into 3 files, something I'd probably have to do anyway to export and import the images easier and turning both top and bottom half images here is what I have right now (by the removal of the background)thanks for trying to help... but I think I'm ready to switch to After effects with this one, the reason why I'm moving it to legacy is simply because I understand simple movement/animation already... If you're curious about what I plan to do with these images, the full ball will be sitting in a hole in my border, turn a high of 90 degrees to the right and then be replaced by the two half images, down it fades slowly out while the upper part is raised off the screen to the right... it's a fancy reveal for my upcoming with new project

• How can I keep my visible background layer when you create a GIF file in Adobe Photoshop elements 11?

  I am trying to create a GIF in Adobe Photoshop elements 11.  To give you the objective of the final result - I am trying to create the illusion of dog legs walking on a yellow background.  Each image individual leg is a separate layer on the yellow background.  I want my background layer to ALWAYS show during the animation.  In ADDITION, I want each paw image to stay on the yellow background that he hosts (if possible).  Here are the steps that I took:

  1. I have my background layer (yellow background)
  2. I layered all the other images on the top (8 paw print images)
  3. I placed these images where I want them on the background layer

  I know that to create a GIF file, I go to 'Save the image for the web', select GIF and click "animate".  The problem is when I preview the animation, it's a single image at a time, instead of the overlay and keeping them on the screen as the animation progresses.

  At the very least, I want the yellow background to show during the animation.  I can live with that if the paw prints don't stay on ;-)

  I would appreciate any insight/help!  Thank you!

  I think that you need to merge each layer with your yellow background, and then try again the gif.

  In other words, put the yellow background under each layer and merge the top layer with the yellow background.

• Why we cannot create more than one primary key on a table. Why we create several unique key on a table. Please explain if anyone have details of this.

  Why we cannot create more than one primary key on a table. Why we create several unique key on a table. Please explain if anyone have details of this.

  «a primary key has semantic meaning, it is to be immutable (never change of value), unique and not null.»

  a unique constraint is simply "at any time, these values are unique - they can change and they can be null.

  You use a unique when constraint

  (a) you do not already have a primary key for a table can have only one
  (b) you allow NULL values in attributes
  "(c) to allow you to update the values in the attributes.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:5541352100346689891

• How can I create a gif image using photoshop. I mean photoshop shortcut keys and the steps for creating gif

  How can I create a gif for my blog [url removed by host] image using photoshop. I mean photoshop shortcut keys and the steps for creating gif

  CTRL + Alt + Shift + S Windows Mac CMD + Option + SHIFT + S change the image that you normally edit images.

• Creating a gif file which is a progression of the filter effects

  I want to take a single image and create a gif from what is a sequence of images with a particular filter effect Photoshop from a maximum to zero effect.  For example, a Gaussian filter.  The initial frame would have a heavy Gaussian filter applied and the last image would have no filter applied.  I want that effect might take one or two seconds with 10 to 20 frames per second.

  I can't imagine this will be negligible or easy... This isn't my question.  My question is if anyone has suggestions on how to optimize the workflow in creating this effect.

  I'm a programmer and I did photoshop programs javascript in the past so far distant that could help, but I don't know if this project requires this level of effort.

  Thank you for your time,

  pedzsan

  All this image to a gif file is the combination of composite layer.  A composite can be a single layer. So, make a layer. He fooled 20 times. Set 19 layer with 19 different setting of a particular filter. Then in the timeline palette, click make image animation.  Then in the drop-down palette, click on images made of layers. Then use save for web to save the animated gif.

• Help to create a gif animated for a navigation bar!

  Hey guys, I'm very new to Fireworks and dreamweave and I encounter a problem that makes my head spin! I need to create a simple animated .gif to a navigation bar (which will be published in dreamweaver). The navigation bar are as follows: http://www.eden.rutgers.edu/~baronson/ITI320/Exercise2/functionality.html. Essentially, all that happens is I create this animated picture and in dreamweaver, when I create the navigation bar of AP, I updated the mouseover this image. My problem is that, compared to the image mouseover of the website ( http://www.eden.rutgers.edu/~baronson/ITI320/Exercise2/images/navi/audience_OVER.gif ) animated my gif has several layers and States, where, as its only has a single layer. I can't seem to find a way to include both text and gif image and incorporate them into the same layer.

  A follow-up to the issue after finding the way to integrate them both in the same State, I should catch every piece of my animated gif for the individual State, that I want it be applied?

  Any help/pointer to where the information would be greatly appreciated. I have read through the manuals and watched a lot of videos of Babbage, but were not able to understand this. Thank you!

  Your gif didn't need to have several layers, but he needs to have several States. To save you a lot of confusion, first create animated gifs, and then export them. Create your navigation bar in the usual way, with simple images, rolloveres or swap. The navigation bar on export. Rename the gifs animated with the names of most of the State of the navigation bar images and then remove (or mone to another folder) more images of the State navigation bar. Move the gif animations in the navigation bar image file. Preview in the browser. The animated gifs should have replaced the original state of the buttons.

• Why cannot create the table partitioned successfully?

  Why cannot create the table partitioned successfully?

  SQL> create table hr.gps_log_his
  (id number,
  name varchar2(10),
  time date)
  tablespace ts_log_his
  PARTITION BY RANGE (TIME)
  (PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')),
  PARTITION udp_part09110708 VALUES LESS THAN (TO_DATE('09110709','yymmddhh24')),
  PARTITION udp_part09110709 VALUES LESS THAN (TO_DATE('09110710','yymmddhh24')),
  PARTITION udp_part09110710 VALUES LESS THAN (maxvalue)
  );
  
  (PARTITION udp_part09110707 VALUES LESS THAN (TO_DATE('09110708','yymmddhh24')),
  Error on line 7: 
  ORA-14120: DATE columns did not specify the complete partitioning limits.

  The detailed error message is as follows:

  ORA-14120: incompletely specified partition bound for a DATE column
  
  Cause: An attempt was made to use a date expression whose format does not fully
  (i.e. day, month, and year (including century)) specify a date as a partition bound
  for a DATE column. The format may have been specified explicitly (using TO_DATE()
  function) or implicitly (NLS_DATE_FORMAT).
  
  Action: Ensure that date format used in a partition bound for a DATE column supports
  complete specification of a date (i.e. day, month, and year (including century)). If
  NLS_DATE_FORMAT does not support complete (i.e. including the century) specification
  of the year, use TO_DATE() (e.g. TO_DATE('01-01-1999', 'MM-DD-YYYY') to fully
  express the desired date. 
  

  Action: Change to_date('09110708','yymmddhh24') to
  to_date('2009110708','yyyymmddhh24')

• Why photoshop create new shape layer whenever I draw a line?

  Hi guys

  I try to draw a bunch of lines, but Im having a problem. I start with a blank page, then I create a new layer. There are, I have the line tool and draw a line under this layer. That layer because that immediately a layer of "shape". Then I draw another line, and rather than stay on the layer, it makes a new layer of 'shape' and mask the previous layer. This continues and and for each line, it makes a new layer and previous mask. Why he continue to create new layers? I want that all the lines stay on the same layer.

  Thanks for your help

  Alex

  As c.p you said "almost."  Choose 'Combine shapes' in this dialog box, Options bar.

  

• When and why to create a layer of 'master' in CS6 for multilayer image?

  I would be recognizing a link or a brief explanation of "when and why" and "how to use" a main layer when you work with a multilayer image (psd or psb) file in CS6.

  I did a search on google and have not found anything useful.

  I've seen some tutorials that make use of a layer of 'master' but I don't understand the "when and why".

  Thank you, Chris Bernhardt

  Yes a composit layer peculiarities, a layer of good work.  When creatring in action, particularly if you give the shares to third parties to use the thing can go wrong if you just use Shift + Ctrl + Alt + E to create actions have no idea as to what the Photoshop course is when they start to play. Some targets will cause Shift + Ctrl + Alt + E does not work. The action also has no idea where in the stack of the current target is. If its best to use three steps to create your composir work layer in the actions. [[Shift + Ctrl + Alt + N Shift + Ctrl + Alt + E, Shift + Ctrl +] can be shorten to Shift + Ctrl + Alt + N + E, Shift + Ctrl +].

  Shift + Ctrl + Alt + N adds new enpth layer above the current target without a prompt and becones current target

  Shift + Ctrl + Alt + E stamps visible layers in the empty layer has been added

  [Shift + Ctrl +] MDE the layer that is stamped to the top of the stack.

  The a layer of good work to do a lot of things adds a mask layers can isolate areas of interest converted to a dynamic allows you to use smart filters on it and also have a filtering mask. Smert filtere adjustable re later.

  Change the Anthony mix mond, opacity, fill and blend so gray can help set the effect create you.

  Taking Christmas adjustment layer of sharpness over a few

  Create composites later high add revail mask all convert to smart object layer

  create a contour mask using a channel like a bright choice that resemble a Jordi and white version of the image using the filter edges to find on the channel of Tournay and add an adjustment of the levels intensift the edges and load as a selection of USINT invert.

  Target the smart object layer and use one of the Floreal sharpening on that. The selection of edge will be added as a mask with filter for the dynamic filter used for sharpening.

  Change of the smart object layer blending mode to luminosity so clors are not made only the intensity and then adjust the blend if sliders gary split the black and white sliders to protect images deepshadows ahd hightlights.  Paint with black in the layer to remove unwanted sharpening Ant.

  to change the sharpness adjustment layer

• Creating animated GIFs...

  Hi - I know this isn't the right forum, but I couldn't find one for Fireworks - and it relates to the development of the web... then...

  I used to Image Ready for years and he loves the simplicity of it! Creating an animated gif is a very painless process - you have a window that can easily add frames of animation, with lighting, to establish frames tween, etc..

  Photoshop CS4 eliminated the associated "Image Ready" software - replacement by Fireworks...

  I can't for the life of understand me how to accomplish a .gif animated in Fireworks - help areas offers a glimpse of what an animation is, but no real help (for me anyway) in terms of the process.

  Can someone guide me please in a direction that will justify Adobe eliminating Image Ready for what appears to be a replacement of "much-more-complicated-than-it-needs-etre"?

  If anyone has links tutorial or other technical notes that they can share, it would be greatly appreciated...

  Thank you

  Jesse

  Hi - I know this isn't the right forum, but I couldn't find one for Fireworks

  Lame... http://forums.Adobe.com/community/Fireworks/fireworks_general

  It would be better to post here.

• create transparent gifs - but keeping an opacity

  Hello

  I am having some problems with the creation of gifs transparent.

  I'm creating a box with a single color in it w / the opacity to 30%, but when I save it as gif, it makes it completely opaque.

  I would like to save it as a gif file, but still making a little transparent.

  Is this only possible with PNG files?

  Thank you advance...

  J

  Is this only possible with PNG files?

  Yes.

  You can simulate transparency by opaque pixels have some background in them color. But as soon as you change your background color, it will look wrong.

  Or you can procrastinate transparency (but this is usually quite horrible).

  Basically, translucency can be in GIF format.

• How to create a GIF from within a SWF?

  I have a Flash application that allows users to have the images, in the form of import SWF MovieClips, in a scene of their choice. I would like to save these scenes custom static GIF files on the Web server. I don't know if this is only possible with ActionScript or if I have to work with PHP/GD or Java, but I've seen it done before (avatars Yahoo! answer) so I know it's possible.
  
  I am very new to actionScript. So far, I found the functions to process the bitmap data, but none for the creation of the file. Can someone point me in the right direction? As you can guess, it is difficult to Google for the variations of 'flash create gif' because it's also a function of the development tools.
  
  Thank you for your advice and suggestions!

  I was unable to find a way to save the graphic files to a Flash application. To my knowledge the only way to create a Flash file is to download it directly from the client to the server, and there is no way to modify a file before saving it.

  I ended up using Java to generate static image designed in the Flash application files. What limits the effects I can use, but it's good enough for my needs.

• Why not create javaServiceFacade methods?

  Hi all
  I followed this demo by Shay Shmeltzer http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/visualDeclarative/visualDeclarative.htm.
  I use JDeveloper 11 g on a Windows XP computer. I create java beasn of the tables from a database oracle, a new named query:

  ...
  @Entity
  @NamedQueries({
    @NamedQuery(name = "Polls.update", query = "insert o into Polls o"),                 // my new query
    @NamedQuery(name = "Polls.findAll", query = "select o from Polls o")
  })
  ...

  Then I create a new java class Service façade (keeping any selected application). I have to do exactly what is shown in the demo, and when I try to create a new method of serviceFacade I note this method has not been created from surveys Java bean.
  
  That's what I have in javaServiceFacade.java (full source)

  package model;
  
  public class JavaServiceFacade {
      public JavaServiceFacade() {
      }
  
      public static void main(String[] args) {
          final JavaServiceFacade javaServiceFacade = new JavaServiceFacade();
          //  TODO:  Call methods on javaServiceFacade here...
          javaServiceFacade.queryPollsFindAll("*");  // <--- don't find the method (obviously there isn't one)
      }
  
  }

  So if I proceed to create the Session Bean I get this null pointer exception:

  java.lang.NullPointerException
       at oracle.jdeveloper.java.provider.BaseFileProvider.getSourceClass(BaseFileProvider.java:735)
       at oracle.jdeveloper.java.JavaModel.getSourceClass(JavaModel.java:364)
       at oracle.jdeveloper.engine.EngineUtils.getSourceClass(EngineUtils.java:890)
       at oracle.jdeveloper.engine.EngineUtils.getSourceFile(EngineUtils.java:899)
       at oracle.jdeveloper.engine.ClassEngine.getSourceFile(ClassEngine.java:149)
       at oracle.jdeveloper.engine.ClassEngine.getJavaSourceNode(ClassEngine.java:172)
       at oracle.jdeveloper.ejb.BaseEjbModuleEngine.getEjbEngine(BaseEjbModuleEngine.java:217)
       at oracle.jdevimpl.ejb.facade.ejb30.Ejb30NamedQueryMethodBuilder.getMethodInfoImpl(Ejb30NamedQueryMethodBuilder.java:119)
       at oracle.jdevimpl.ejb.facade.AbstractMethodBuilder.getEjbMethodInfo(AbstractMethodBuilder.java:62)
       at oracle.jdevimpl.ejb.facade.ejb30.Ejb30NamedQueryMethodBuilder.generateImpl(Ejb30NamedQueryMethodBuilder.java:164)
       at oracle.jdevimpl.ejb.facade.AbstractMethodBuilder.generate(AbstractMethodBuilder.java:131)
       at oracle.jdevimpl.ejb.facade.SessionFacadeBuilder.generateFacade(SessionFacadeBuilder.java:138)
       at oracle.jdevimpl.ejb.facade.ejb30.Ejb30SessionFacadeBuilder.generateFacade(Ejb30SessionFacadeBuilder.java:242)
       at oracle.jdeveloper.ejb.EjbGenerator.generateClasses(EjbGenerator.java:834)
       at oracle.jdeveloper.ejb.EjbGenerator.saveToParent(EjbGenerator.java:596)
       at oracle.jdeveloper.ejb.EjbGenerator.saveToParent(EjbGenerator.java:553)
       at oracle.jdevimpl.ejb.ejbwiz.EjbWizard.doFinish(EjbWizard.java:226)
       at oracle.jdevimpl.ejb.ejbwiz.EjbWizard.invokeImpl(EjbWizard.java:143)
       at oracle.jdevimpl.ejb.ejbwiz.SessionEjbWizard.invoke(SessionEjbWizard.java:108)
       at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:317)
       at oracle.ide.wizard.WizardManager$1.run(WizardManager.java:365)
       at oracle.ide.util.IdeUtil$3.run(IdeUtil.java:1079)
       at oracle.javatools.util.SwingUtils.invokeAfterRepaint(SwingUtils.java:520)
       at oracle.ide.util.IdeUtil.invokeAfterRepaint(IdeUtil.java:1092)
       at oracle.ide.wizard.WizardManager$2.run(WizardManager.java:373)
       at oracle.ide.util.IdeUtil$3.run(IdeUtil.java:1079)
       at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
       at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
       at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273)
       at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183)
       at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173)
       at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168)
       at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160)
       at java.awt.EventDispatchThread.run(EventDispatchThread.java:121)

  So the question is why JDeveloper not create me that methods when I create this serviceFacade with thw classic Wizard as he did in the demo? Where I made a mistake?
  Thank you.
  
  Published by: Silicio on November 19, 2008 11:50

  I don't think you can use a named query for an insert operation.
  Remove this line from your APP: @NamedQuery (name = "Polls.update", query = "Insert surveys o o").
  Then recreate a façade and see how it goes.

• Does anyone know why Itunes creates two categories of artist? (Photo inside)

  https://i.imgur.com/OGMR9tD.jpg

  as you can see in the picture? his is not under the same artist, and I don't know why.

  Show your musical using the songs view library, so that you see a simple list with columns.  If you do not see the column Album artist , show it (right click on the header row in the list of songs to hide and show columns).  You can move the columns on the list by dragging the column (right or left) of its position.  I put the Album artist artist column column.  Make sure that the entries in the Album artist for all songs from this artist have the exact same entry.

  NOTE: You can do this at once by selecting all the songs of the artist and do a read the information on the selection.  Change Album artist in the Details tab for the Info field.