Why separate the role in vSphere 5.5?

Similar Questions

• Privilege 'Create View' has been removed from the role of "Resource" why Oracle?

  Sounds like a silly question, but does anyone know why?

  >
  HM... deprciated and replaced by what? I know that they trimmed CONNECT much but only create view seemed lacking in RESOURCES.
  >
  Replaced by NOTHING. They have not just 'trim' CONNECT. He now has only the CREATE SESSION privilege.

  Published only info I've seen are these two notes in the Oracle is the database of the Security Guide.
  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/authorization.htm
  >
  Note:
  Each facility must create its own roles and assign only those privileges which one needs, so to keep detailed privileges in use control. This process eliminates also any need to adapt existing roles, privileges or procedures, whenever the Oracle database changes or removes the roles of Oracle database sets. For example, the role CONNECT now has only a single privilege: CREATE THE SESSION. CONNECT roles and resource will be deprecated in the future the Oracle database releases.
  . . .
  Note:
  Visitors should stop by using the CONNECT and RESOURCE roles, because they will be obsolete in future versions of database Oracle. The role of CONNECTION currently maintains only the CREATE SESSION privilege.

• Why it is the role of resource is implicitly grant unlimited tablespace?

  referring to unlimited storage space - is it necessary on a daily basis for the developers of the Apex, the user
  
  exec: v_grantee: = "XYZ";
  
  Select the dealer, the privilege of dba_sys_privs where dealer =: v_grantee;
  
  UNLIMITED TABLESPACE XYZ
  
  Select the dealer, granted_role from dba_role_privs where dealer =: v_grantee;
  
  XYZ CONNECT
  RESOURCE OF XYZ
  
  exec: v_granted_role: = "CONNECT";
  Select the role, the privilege of role_sys_privs where role =: v_granted_role;
  -I check which privileges associated with CONNECT system
  
  exec: v_granted_role: = 'RESOURCE ';
  Select the role, the privilege of role_sys_privs where role =: v_granted_role;
  
  CREATE TYPE RESOURCES
  RESOURCES CREATE TABLE
  CREATING CLUSTER RESOURCES
  CREATE TRIGGER RESOURCES
  OPERATOR TO CREATE RESOURCES
  CREATE SEQUENCE RESOURCES
  CREATE INDEXTYPE RESOURCES
  RESOURCE CREATE PROCEDURE
  
  -I check what are associated with RESOURCE access privileges
  
  but the moment I revoke resource of XYZ
  
  There is no more unlimited tablespace to XYZ. I found it quite confusing because none of the roles granted to a UNLIMTED TABLESPACE XYZ, why is it so?
  
  I encounter this problem in 9 and 10 g.
  
  Thank you very much!

  Hello

  Take a look at the thread AskTom following-

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:7540675724395

  In particular, where it says -

  It is so documented that when you grant DBA or RESOURCE, the unlimited tablespace privilege (which
  CANNOT be granted to a role) is granted to the user as well.
  
  It is just the way it works. 
  

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• Why can't I see hosts/guests in my vCenter while I can see them in the Web Client vSphere?

  Hello

  IM new to VmWare\PowerCLI.  The goal is to get a list of VM guests in a vCenter via PowerCLI.  I can see 80 guests when I connect via the Web Client vSphere, but when I use the PowerCLI cmdlets, a Get-VMHost returns nothing.  I did the following:

  1 connect-VIServer the username-password IluvVmWare myserver.acme.com-acme\BigDog connects fine without error.

  2. $defaultviserver | Select * shows me the default connection properties.

  3 get-data center shows me 2 data centers; DC1 and DC2

  4 get-DataCenter DC1. Get-VMHost returns nothing

  5 get-VMHost returns nothing

  6 get-vmhost-Server myserver.acme.com returns nothing

  What I do wrong with PowerCLI so I can't get a dump of the hosts on the vCenter?  I can see them all in the vSphere Web Client, so permissions seem fine.

  It looks like that there.

  You must speak with the vCenter admin I guess.

  More simple would you give permissions to view read-only on the vCenter and let this authorization to spread.

  Out of curiosity, this shows the VMHostname?

  Get - VM | Select Name,@{N='VMHost'; E={$_. VMHost.Name}}

• Question about the roles... color coding.

  I have my film blocked in compound clips.  I noticed a number of my compound clips is colored blue, instead of the usual gray.  I'm sure it's on the roles I have attributed in the compound... clips but can not quite understand what it is... WHY compound clips themselves are blue light?

  I was wondering if anyone has a useful quick thought?

  Ben

  

  YYou have the role selected in the roles of the index of the timeline panel.

• Based on the roles of the views of CLI with AAA method

  Hello

  I'm configuration based on the roles of views CLI on a router to limit access to users.

  My criteria:

  -There should be a local user account on the router that has the view of 'service' in the annex

  -If the router is online and can reach the radius server, people in the right group are assigned to the view 'service '.

  My configuration:

  AAA new-model

  Select the secret 1234

  username view service secret service 1234

  !

  AAA my_radius radius server group
  private-server 10.1.1.1 auth-port 1645 acct-port 1646 timeout 3 retransmit 2 0 1234 key
  private-server 10.1.1.2 auth-port 1645 acct-port 1646 timeout 2 relay 1 0 1234 key

  !

  authorization AAA console
  AAA authentication login my_radius local group mgmt
  AAA authorization exec mgmt my_radius local group

  !
  Line con 0
  authorization exec mgmt
  Synchronous recording
  login authentication mgmt
  line vty 0 4
  authorization exec mgmt
  Synchronous recording
  login authentication mgmt
  entry ssh transport

  THE ERROR

  Now, I want to go set up the cli view "service"...

  # mode

  Password: 1234

  * 08:00:02.991 Jun 1: AAA/AUTHENTIC/SEE (0000000 D): method of picking list "mgmt".
  * Jun 1 08:00:02.991: RADIUS / ENCODE (0000000D): ask "" password: ".
  * Jun 1 08:00:02.991: RADIUS / ENCODE (0000000D): upload the package. GET_PASSWORD
  * 08:00:21.011 Jun 1: RADIUS: receipt id 1645/13 10.1.1.1:1645, Access-Reject, len 20

  Questions

  Why the view "enable" trying to choose a list of method when you need to provide secrecy to enable it to access the root view?

  You can change this behavior to always use the key to activate it?

  The TEMPORARY Solution

  If you are connected to the router via telnet or SSH, the solution or workaround for this problem is:

  local VIEW_CONFG AAA authentication login

  !

  line vty 0 4

  authentication of the connection VIEW_CONFG

  Make your view configuration and reconfigure the line to use the correct (desired) authentication method.

  ________________________________

  Thanks a lot for the suggestions

  / ENTOMOLOGIST

  Hello

  You have configured the following:

  AAA authentication login my_radius local group mgmt
  AAA authorization exec mgmt my_radius local group

  Line con 0
  authorization exec mgmt
  Synchronous recording
  login authentication mgmt
  line vty 0 4
  authorization exec mgmt
  Synchronous recording
  login authentication mgmt

  entry ssh transport

  So every time you try to connect to the console or ssh authentication will travel to the server radius because of the following command 'connection authentication mgmt '.

  You can get there. What is set on the method list mgmt first will take precedence.

  activate seceret is defined locally. but you have configured the following:

  AAA authorization exec mgmt my_radius local group

  Line con 0
  authorization exec mgmt

  line vty 0 4
  authorization exec mgmt

  So exec mode is also via the radius server.

  When you set up:

  local VIEW_CONFG AAA authentication login

  !

  line vty 0 4

  authentication of the connection VIEW_CONFG

  You do local authentication, so it works the way you want.

  In short, regardless of authentication is set 1 on the list method will take priority. the relief will be checked only if the 1st aaa server is not accessible.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Unexpected behavior with the role of OmeSiteAdministrators

  I is currently working on the test of the functionality of the OmeSiteAdministrator role, so we can use it in our Organization.  We run OME 2.0.0.1926.

  I went into preferences - permissions of device group and add a new test user (using members of the edict of OmeSiteAdministrators common task.)  I've provided the correct user and domain name.  Then I went to the section manage permissions of the device group and selected a group that this user must be able to deploy updates and tasks remotely.

  By connecting to the Console as long as this test user I could see all THE devices to Manage - devices.  When I went to Manage - system update I have also able to note all the devices listed in the incompatibilitee section and select any device to bring up the window of the tasks of system update for.

  I looked at the roles of the test user (by clicking the user name in the upper right corner) and saw that he was an OmeSiteAdministrator and OmeUser.  It looks like a clean install of OME adds the BUILTIN\Users group to OmeUsers group.  I deleted the OmeUsers group builtin\Users and then the test user could see that members of a group specified in Manage - system update.

  But when launched test user then the console OME, they could still see all devices to Manage - updating the system, even if the top of the window shows "System Update: filter by: ..  The actually specified group that contains a single device, but the test can view all devices.

  I have logged in as an OmeAdministrator, came back on the device group permissions and see an additional user.
  In modify the members of OmeSiteAdministrators, I see the test user appears twice, both times with the user name and the appropriate domain.  But there under manage group permissions on the device, the user/DOMAIN user that I added, but now also a STRANGER/user (domain is actually 'UNKNOWN' and user is the user name of test).

  It seems that the filter does not always work (it worked only once for the test user.  Each time other than the test user opens the console he showed all devices.)  Also, Im not sure why there is the addition of the UNKNOWN/username user.

  Also, please review read the white paper on delltechcenter.com/ome and see if it offers any help.

  OpenManage Essentials Role-Based Security and implementation

  Thank you

  Rob

• Are thinking of duplication of table to the replication of Vsphere, a quick question

  We currently use Array replication and plan to use the replication of vsphere for flexibility. Unfortunately, we have more than 500 virtual machines to protect - but it is another question and I hope MRS. deploy several devices that will help.

  I can't determine which network interface, the replication traffic goes on:

  1 Hypervizor ports between the ESX hosts (which are 1Gbit in my case) where VMS are?

  2. pushed through vcenter somehow?

  3 Vlan than VR devices are connected to the?

  I have a 10 Gbps link between sites, trying to find how to use more than 1 GB, because the 3 options above are 1Gbit. Although the unit sat on a group of ports that is supported by the host ESX 10Gbit links - but I guess that the only real device of a 1Gbit NIC adapter.

  Hello

  Replication traffic is going:

  1 VR source ESXi server at the remote site via custom protocol LWD (light-weight-delta) TCP ports 31031 and 44046.

  2. outside in VR server via port 902 device and Protocol NFC ESXi host target, then the target data store.

  Separate NICS for VR (isolation of network traffic) replication traffic - to GDL from source ESXi to GDL for server VR application and for inbound replication traffic target ESXi NFC are not available in the current versions, but are part of an RV to come free.

  The VR machine using a NIC vmxnet3

  For the current version, you might want to perform some custom routing/formatting via the ports 31031 (initial full synchronization) and 44046 (all the traffic from replication after the initial synchronization is complete).

  Kind regards

  Martin

• Local administrators on Windows of vCenter server is automatically granted 'Administrator' role in vSphere

  
  This still applies (5.0 and 5.5).  I might have missed in the 5 documentation site.  I see still ESX Admin workaround applies to 5.5 and wondered about the role of local administrators.

  VMware vSphere 4 - ESX and vCenter Server

  
  It's the 4.0 site doc.

  "Host records all selected Windows domain user, or a group through the process of assigning permissions." By default, all users who are members of the local windows Group istrators Adminthe vCenter Server have the same rights of access as any user assigned to the Adminsector role. Users who are members of the group Administrators can log on as individuals and have full access. »

  EDIT - I found this... VMware vSphere 5.1

  Seems to be the same... :))

  The main difference is that before 5.1 and 5.5, the local Administrators group on the server vCenter Server is the default vCenter Server Administrator. With vCenter 5.x with the addition of SSO, installing vCenter, you will be asked which user account or the group will be initially given and vCenter Server Administrator role. Here is the screenshot. This screenshot, after installing vCenter, only the [email protected] has the role of administrator on the vCenter server.

  

  If you upgrade your server vCenter to 5.x since a previous version using a Simple installation, if I remember correctly, you won't see the screen above as the installation will use the existing as the vCenter Administrator local Windows Administrators group.

  It will be useful.

• Script to join the domain, the role of configuration, add permissions and activate/SNMP configuration

  So I'm writing a script to install our vSphere hosts to work with our monitoring software.  Right now, it's all done by hand and I would like if possible to automate it.  So far, I came up with this.  I get to step 5 and that's where it fails.  I can get it manually run the Get-VIAccount command, but in the script, it fails.

  These are my steps

  1. connect to an existing host and retrieve role properties.

  2. connect to the new host

  3 join the domain.

  4. disconnect the new host and reconnect with the credentials of domain

  5. get the domain account, role of research/create and add permissions to host

  6. enable and configure SNMP

  7 restart MGMT officers.

  #Variables

  $vmhost = "Host03".

  $domaintojoin = "Domaine.org".

  $domainAlias = "domain".

  # $usernametograntpermissions = "service.account".

  $rolename = 'team - account control service '.

  #Connect to host17 to retrieve the role privileges

  to connect-viserver host17

  #Extract of privileges for the role of vcenter Monitoring Service

  $privsforrole = get-viprivilege-role (get-ferrule-name $rolename)

  Server VI #disconnect

  disconnect-viserver *-confirm: $false

  VSphere hosts #Connect above (enter the credentials of the root when prompted)

  SE connect-viserver-Server host03

  #Join field

  Get-vmhostauthentication - VMhost ctcvsphere3 | Game-VMHostAuthentication-domain $domaintojoin - user %-% - JoinDomain-confirm password password: $false

  credentials of the #disconnect root

  disconnect-viserver *-confirm: $false

  #reconnect with the credentials of domain

  SE connect-viserver-Server ctcvsphere3-user username-password password % domain\username

  #Get domain account and add to the host

  $viAccount = get-VIAccount-DOMAIN-User - ID service.account

  # Get the role

  $viRole = get-ferrule-name $roleName

  If (-not $viRole) {}

  throw the "Role of the creation.

  New-ferrule-name $rolename - Server $vmhost

  Together-ferrule-role (Get-ferrule-name $rolename - Server $vmhost) - AddPrivilege (get-VIPrivilege-id $privsforrole - Server $vmhost)

  }

  # Add permissions on VMHost

  New-VIPermission-Director $viAccount-role $viRole - entity $vmHost

  all VIServers #disconnect

  Disconnect-VIServer *-confirm: $false

  }

  #Configure SNMP

  Get-vmhostsnmp | set-vmhostsnmp-enabled: $true

  Get-vmhostsnmp | game-vmhostsnmp - ReadOnlyCommunity 'SNMP.

  #Restart Mgmt officers

  Get-VMHostService - VMHost $vmhost | where {$_.} Key - eq "vpxa"} | Restart-VMHostService - Confirm: $falese - ErrorAction SilentlyContinue

  Here is my error:

  Get-VIAccount: 27/02/2014-16:03:11 VIAccount Get A general system

  rror occurred: access to the directory error

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: NotSpecified: (:)) [Get-VIAccount], SystemError)

  + FullyQualifiedErrorId: Client20_VmHostServiceImpl_RetrieveUserGroups_Vi

  Error, VMware.VimAutomation.ViCore.cmdlets.Commands.PermissionManagement.GE

  tVIAccount

  Get-VIAccount: 27/02/2014-16:03:11 Get - VIAccount VIAccount with the id

  "service.account" was not found using the specified filters.

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: ObjectNotFound: (:)) [Get-VIAccount], VimExceptio)

  n

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.PermissionManagement.GetVIAccount

  New-VIPermission: Impossible to validate the argument on the parameter "principal." The argument

  ent is null or empty. Provide an argument that is not null or empty, and then try

  the command again.

  C:\ps1\vmware\snmp1.ps1:56 tank: 40

  + New-VIPermission-main < < < < $viAccount - $viRole - entity role

  y $vmHost

  + CategoryInfo: InvalidData: (:)) [new VIPermission], ParameterBi)

  ndingValidationException

  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom

  ation.ViCore.Cmdlets.Commands.PermissionManagement.NewVIPermission

  The term 'catch' is not recognized as a cmdlet, function, script fi

  the, or an executable program. Check the spelling of the name, or if a path has been included

  DED, make sure the path is correct, and then try again.

  C:\ps1\vmware\snmp1.ps1:57 tank: 12

  + captures < < < < {}

  + CategoryInfo: ObjectNotFound: (catch: String) [], CommandNotFou

  ndException

  + FullyQualifiedErrorId: CommandNotFoundException

  Thanks in advance!

  Dimitar did a nice write-up of this phenomenon and a possible solution.

  See ESXi hosts to join a domain and licensing with PowerCLI

• Icon "Are the selected markers to separate the export audio files" is grayed out outside in the markers window. The titles show starts but no end of times, and yet time is calculated.

  I have a large wav file to finish securities as a mixer and inserted the CD markers where I want the marked pistes. Icon "Are the selected markers to separate the export audio files" is grayed out outside in the markers window. The titles show starts but no end of times, and yet time is calculated. Why can't I export those items marked as separate files?

  You must make the markers of track in regions for the Export of work function. Make sure that you have placed a marker at the end of the file, as well as at the beginning of each track. Then select all the markers in the marker list by left clicking the first then shift left click on the last. You can then merge markers in the channels using the comb as icon (3rd from left) at the top of the list of markers. You will then be able to export the lines marked as separate files.

• Need help to understand the network of vSphere environment

  Hello

  I need your help in understanding the network environment in vSphere. Please see the diagram and the text below:

  

  NIC #1 - Management Port (access from client vsphere, vCenter server)

  NIC #2 - Port of VMkernal (for iSCSI, vMotion, etc.)

  NIC #3 -?

  #4 – CARTE NETWORK INTERFACE?

  Q1 how allow external users to access services over the ESX host? (for example, IIS, FTP, Exchange, NFS)

  Q2, what will be the role of the other two network cards? Is it connected to the physical switch?

  * Ask you all to please help me by sharing your knowledge / experience on the network portion, you have made in your environment as NIC how, what to do with that. *

  I really need to understand the networking of concepts in vSphere, hope that your help!

  
  

  Best regards: Yash

  With an additional NIC with 2 port a general configuration might look like this:

  vSwitch0 - vmnic0, vmnic1 (connected to different physical switches)

  Network VMkernel management

  VMotion VMkernel network (own IP network, own VLAN)

  Better if they is configured as active / standby.

  vSwitch1 - vmnic2, vmnic3 (connected to different physical switches)

  Trade VM

  vSwitch2 - vmnic4, vmnic5 (connected to different physical switches)

  VMkernel iSCSI (own IP network, own VLAN)

  Ideal if it is added to the component Multipath iSCSI, which is quite easy to vSphere 5.

• Habilitando all the features do vSphere

  All the roles do sao habilitadas vSphere no acordo com Server vCenter as licencas, ok?

  Can not o instalar Vmware Workstation ESX or ESXi 4.1 e usar todas has no vCenter (DPM, Vmotion, VDR, etc...)? Previously wont em um Windows x 64 claro.

  Alias, docks did features can I apply no vSpher como São instalados e? Vejo no site that is great gama of tools, mas nao tenho uma an ideia como elas menor is aplicam.

  Quem Puder me esclarecer estas doubt, fico muito grato.

  SDS,

  OS Recursos do vSphere are waiting acordo com as licencas. No link abaixo voce summer uma relaçao between o licenciamento of resources:

  http://www.VMware.com/products/vSphere/buy/editions_comparison.html

  Small and Pará e empresas media:

  http://www.VMware.com/products/vSphere/small-business/buy.html

  Você do montar um ambiente no VMwre Workstation 7, utilizando e vCenter ESX testicles.

  Espero ter colaborado.

  Att.

  Brahell

• System become vs the role of trigger of the stored procedure privileges

  Hi all
  
  I'm using Oracle 11 g R2.
  
  I have a user called app_user I assigned a role called app_role.
  In the app_role, I have the privilege of system select any order.
  
  I created a movie on another user rep_user, the name of the sequence is rep_seq

  create sequence rep_user.rep_seq 
  minvalue 1
  maxvalue 99999
  start with 1
  increment by 1
  nocache
  order;

  I have the table below that is created under app_user
  

  create table app_user.test_table (id_1 number (10));

  I have the bottom of trigger that is created under app_user:

  create or replace trigger test_trigger 
  before insert on test_table
  referencing NEW as New OLD as Old
  for each row
  begin
  select rep_seq .nextval into :NEW.id_1 from dual;
  end; 

  The problem is that when I create the trigger, it is created with a compilation error: there is no sequence
  
  but when I give you a system privilege not to leave in the role of the trigger app_user is created successfully.
  
  Why this behavior? I use directly access privileges to the user instead of assigning to a role? that's all the privileges? I have the same on some deal with any dictionary.
  Is it one alternative to the attribution of the privilege system directly to the user?
  
  Kind regards

  There are two types of stored objects - rights define objects and objects of appellant's rights. Rights define managed objects in virtue field of safety of the owner of the object, but ignore privileges based on roles granted to the owner of the object while the appellant's rights run under security of the appellant (applicant) and honor him roles. Triggers are objects of the author's rights, select therrefore on sequence must be granted directly, not via a role.

  SY.

• create view does not work with the role of resource

  I just upgraded from 10.2.0.1 to 11.1.0.7
  
  the role of resource users could create views on the old database...
  now, they can't
  ORA-01031 insufficient privileges
  
  I have to give them create it all discovers the system privileges

  (1) I assume you mean that you gave them the CREATE VIEW privilege. Not CREATE ANY VIEW. The latter would allow them to create a view owned by another user who would be dangerous enough.

  (2) it is not related to the role of RESOURCE. It is almost certainly related to the CONNECT role. CREATE VIEW (among other privileges) has revoked the CONNECT role in point 10.2. I don't know why your 10.2 database was working, I guess that you updated from an earlier version, in which case the update may not have removed the privilege correctly (see Metalink: 317258.1).

  (3) you certainly don't want to use the CONNECT role or RESOURCES in the application of the production. Were the roles of the sample which have been overloaded with privileges for the various elements of the sample code. You should really create your own roles with of whatever your users must actually rather than using these predefined roles of privileges.

  Justin