Why siri cannot find my films in my library?

Similar Questions

• Why Siri cannot play music?

  Whenever I have ask Siri to play music or a playlist, or an artist, song, Siri said "Sorry, I'm unable to play your music." Why? And how can this be repaired?

  Hello cohenmd,

  Looks like Siri has trouble reading your music, but otherwise very good. I would start with these troubleshooting steps in the following article:

  1. Restart your iPad, iPhone or iPod touch.
  2. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.

  From: Siri use on iPhone, iPad, or iPod touch

  If the problem persists then I would leave the settings and music apps:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset

  Thank you for using communities of Apple Support, beware!

• Siri cannot find applications or play music

  Just upgraded to the 6s and am having some problems with Siri.

  It cannot open one of my apps (more comical, the App Store - see picture attached) or play any of my music. I am able to solve the problem by disabling Siri, restart my phone and then activation Siri yet BUT as soon as I turn on "Hey Siri" back, it plays dumb.

  Can anyone help?

  Thank you

  Toby

  

  Hello tjknight83,

  Thank you for using communities of Apple Support.

  If you have trouble with Siri opening applications, you can take a look at the following article for assistance:

  Use Siri on your iPhone, iPad or iPod touch

  Specifically, the following article:

  Help with Siri

  • If "Hey Siri" does not work, make sure that "Hey Siri" is turned on under settings > general > Siri.
  • Could Siri say, "Sorry, I have problems connecting to the network", or "Try again in a few moments." It is probably a problem with the network. Check your Internet connection and try again later.
  • If Siri is not available or responding to questions, see the next section.

  If Siri is not available, or do not understand or answer questions

  After each step, see if you still need help:

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled in settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  If Siri does not make a noise when you press and hold the Home button

  On your iPad or iPod touch, Siri sounds when it's time to ask a question. If you have an iPhone with iOS 9 or later, Siri begins to vibrate in place. You will hear only the ringtone on your iPhone with iOS 9 or later, when you use headphones.

  Siri also sounds when you use "Hey Siri" on an iOS device 9.

  Best regards.

• Registry Booster Uniblue found 380 problems why windows cannot find them?

  Uniblue Registry Booster found 380 would have problems - why WINDOWS can't find them?

  Uniblue Registry Booster found 380 would have problems - why WINDOWS can't find them?

  Ignore what you said Uniblue Registry Booster and get rid of it. It and all similar programs, are useless at best and often very dangerous to use.

  Registry cleaning programs are * all * snake oil. The registry cleaning is not necessary and dangerous. Let alone register and do not use any registry cleaner. Despite what many people think, and what software record cleaning providers are trying to you convince to have used the registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake delete an entry you need is much greater than any potential benefit it may have.

  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns against the use of registry cleaners has never said that they always cause problems. If they have always caused problems, they would disappear from the market almost immediately. Many people have used a registry cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it the essential * risk * to have a problem. And since there is no advantage to using a registry cleaner, running the risk is a very bad deal.

• Why me cannot find 'c:\DOCUME~1\ADMINI~1\LOCAL~1\Temp\stop-virus.vbs '.

  Hai dear experts... whenever I start my computer am getting Windows Scripting - is not 'c:\DOCUME~1\ADMINI~1\LOCAL~1\Temp\stop-virus.vbs '.        Why do me this message?   Pease help me
  using windows xp

  For example, consider that you do not find a line in the display "Startup" ccleaner which included all of

  • Stop - virus.vbs
  • cscript.exe
  • WScript.exe

  Download and install Autoruns.  Let scanner up to cooking (see the lower left of the window).  Click the "all" tab.  Then file > search and for each of the 3 above.

  If you find the stop - virus.vbs, uncheck the box at the left end of the line.  If you find cscript or wscript, select the line, right click and "copy" then paste it in your next reply here.

  A quirk of the Autoruns to 'find' tool, it's that you must manually move the selection to the bottom of a line then press F3 to "find next."

• HP OfficeJet L7780 802.11 g - why it cannot find my Apple Airport Extreme?

  I bought a HP officeJet L77380 all-in-one printer/fax, etc. It is designated in 802.11 g I turned the radio network / wireless 'on '. When I choose Network/Wireless Wizard I get a rotating cursor and the message «Search» router wireless... "and he never finds anything. "I chose my Airport Extreme Radio Mode Setup: 802.11n (802. 11 b / g compatible). It still does not work. Help! And a Happy New Year in this Discussion Forum.

  I downloaded and reinstalled the current driver.  It works fine when it is connected to the Airport Extreme, even via an ethernet cable.  I posted this to the talk of HP and they told me to contact the Apple Support! (this shows how useless this company may be!).  I also spent an hour on the phone with HP support and it turns out that they put me thro' for their expert XP and there weren't available Mac technicians.  Well - it's Saturday night!

  Just to be clear, you're saying your L7780 is unable to discover your network wireless printer Wireless Setup Assistant?

  BTW - I run a 802.11n Airport Extreme wireless router at home and my HP wireless printers work fine.

  I would like to see the report of internal connectivity of the printer.  Press the < configuration > and <># keys simultaneously.   Analyze the report on a memory card, copy it to your PC and post the image here.

  The connectivity report will give me details about your wireless network and the networks in the region.

  Also, what other wireless devices you have connected to your network?

  Best regards / Jim B

• Show poster only "no connection Apple Watch Siri cannot find your iPhone to access Siri"

  He won't do anything else. I can't answer the phone or even to know what time it is. That's all it displays this message. The buttons no longer work.

  Hi Camille

  Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo, then release them and expect the watch again.

• I just loaded my pix in LR but cannot find people discovered in the library to run facial recognition

  The help module says I should be able to see a button on the toolbar, but I can't.  Aide also said there is an option of people under the notice, but I'm not.  Aide said there is a shortcut by pressing "O", but that does nothing.

  I feel I'm missing something.

  I would really appreciate help I 64000 pictures I imported all and facial recognition is essential to their organization.  Thanks in advance.

  Launch the creative application of cloud and then go into the Apps tab. LR CC 2015, if available, click on the button install.

• Windows cannot find any additional network?

  I am currently using my laptop that can connect to my home network but my PC can't. My PC can't find no additional network. It says it is connected to the network called 'Network', but I can't use my internetor all programs using the internet. It says "windows cannot find any additional network." I clicked on "Diagnose why windows cannot find any additional network", it told me to update my drivers and my drivers he's was updated. Can someone help me?

  Hello

  You can check the link below and try the advice given and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-cannot-find-any-additional-networks-an/ca9f086b-42A5-46E5-b894-92c009f8eba8

  Hope that information was useful

• Help, my lightroom cannot find my catalog at startup

  Where can I find my catalog? This program works perfectly for 6 months. So that's what happened when I tried to re - open LIGHTROOM on my IMAC OSX 10.9.5 5.7... now I can't go through a screen that says "Adobe Photoshop Lightroom - select a catalog...". and there is a list that says "select a recent catalog to open...". BUT there is no listed catalogue click. WHERE is my 17 000 photo book? (everything was working fine until I added another FOLDER called ARchive and is my external storage drive...) How to use this form?

  Thanks a lot for your suggestions.

  LouAnn

  PS I'd also renamed the PICTURES to THE PICTURES folder, don't you think not that LIghtroom cannot find it now? I looked for the .lrcat extensions and found a series of backups, so how can I get the LIghtroom program to find the catalog?

  Post edited by: LOUANN BRIZENDINE

  Of course, this is why Lightroom cannot find the catalog. But if you go to the folder all IMAGES should have a Lightroom folder. And inside this folder, you will find your catalog. It has the .lrcat extension. There are other files in this folder as well as Lightroom depends on. And since you renamed your pictures folder Lightroom cannot find these either. In any case, double-click the catalog file in the new location and everything should be good.

  Programs are designed to run on the dependencies in different folders. It's really not a good idea to rename you arbitrarily a folder. In fact, I would really say that you change the name of this folder to what it was originally, and let it. It's a standard folder that other programs might be addicted as well.

  And just to clarify, I would like to rename your PHOTOS ALL at what it was originally before you start looking for the catalogue and double click on it as I suggested. This folder of photos could almost supposed to constitute a system folder, in my opinion. It's that I don't think needs to be renamed.

• Cannot find DEFAULT. File ENV in Forms 11g R2

  Dear Sir
  
  
  Cannot find the file called default.env in forms 11g R2 (development facility); is there an equivalent file?
  
  I need to change the values of certain parameters (for example. RESTRICT_ENTER_QUERY)
  
  Grateful if someone has the answer...

  If you have installed forms of development that forms/States servlets are deployed in the AdminServer. Try AdminServer instead of WLS_FORMS in your path.

  see you soon

• cannot find siri on iphone or use 5 not in settings

  cannot find Siri on I - phone 5 not in the settings or use...

  Hello

  Siri settings are accessible via settings > general > Siri > activate Siri and, if you wish, allow also 'Hey Siri.

  If these settings are not available, check if Restrictions have been enabled:

  • Settings > general > Restrictions - Siri & dictation.

  More information:

  Use Siri on your iPhone, iPad or iPod touch - Apple Support

• Windows tells me it cannot find the files to play in one of my music, why is this?

  When I click on any track, I get a message saying that Windows Media Player cannot find the file. Why is this and how to solve the problem?

  Hello

  (1) is this problem occurs with any format of file in particular?

  (2) what is the exact error message?

  (3) have you made recent changes to the computer before the show?

  I suggest to refer to the following articles and perform the troubleshooting steps out there.

  Method 1: Solve the video issues in Windows Media Player and other media or library

  Run the Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2:

  You receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.Microsoft.com/kb/926373

• Rename a product folder "cannot find this item. By clicking on "Try Again" always works. Why?

  This isn't the same problem as similar comments that relate to the inability to delete the folders that contain the zero byte files.

  If I try to rename a file in my system, I get "Cannot find this item" with the choice of 'Try Again' and 'Cancel '. When I click 'Try Again', it always succeeds. -My system is not paralysed - but it is quite boring. I can even right-click on my desktop and choose 'new... '.  Folder"and type a name, and I get"cannot find this item ". What is interesting is that the name of the element changes even before I click on 'Retry '.

  If I have a folder named "Folder1" and I rename it to "Folder2", I get the error "Folder1" could not be found - that is in fact true, as it is already renamed "Folder2".

  Why Windows 7 looking for the old folder name after renaming it? I also disabled AVG live scanner without result.

  Any ideas or suggestions would be greatly appreciated.

  Thank you.

  I finally got.

  I used the same solution for the similar problem in Windows Vista. Once I got to my company laptop, I exported this 2 registry keys.

  Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\explorer\FolderDescriptions

  Merged with my pc and this is!

  The "shell" command also works again (ex: shell: staff opens the account folder)

  I downloaded the reg file and you can get it here http://cid-fb5a28bc4a1cc9b6.skydrive.live.com/self.aspx/Public/Folder%5E_fix%5E_win7%5E_x64/FolderDescriptions.rar

  This is for Win7 x 64. Use it at your own risk.

• I just download Lightroom and Photoshop CC but I cannot find filter dehaze... why?

  I just download Lightroom and Photoshop CC but I cannot find filter dehaze... why?

  Hi nicolagenati,

  Have you updated your application of Creative Cloud 2015?

  Once you update your app to the CC 2015 you would be able to use the Dehaze filter, here is how to upgrade to 2015 CC: https://helpx.adobe.com/creative-cloud/help/creative-cloud-2015-updates.html

  Kind regards

  Rahul