HP OfficeJet L7780 802.11 g - why it cannot find my Apple Airport Extreme?

Similar Questions

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• Why can't I update my Airport extreme Firmware?

  Why can I update my Airport Extreme 802.11n (3rd generation) Firmware?

  He keeps asking me to put in my password once I've done without end.

  If I forgot the right one, where can I find the right pair?

  Keychain Access (password of the show) is without help. It is to show that it took me several times!

  Thank you for your time and patience,

  W.W.

  Unfortunately, your message you can think that you only have a single password for AirPort Extreme, when you have two, and maybe three.

  (1) wireless network Password... used to connect wireless devices to your wireless network

  (2) basic password Station... a device password used to access the settings in AirPort Extreme AirPort utility so that you can make changes to the configuration of the airport and install the new firmware updates

  (3) disk password... an option that can be configured to require that a password can be entered to access the data on a hard drive connected to the AirPort Extreme. Most users use the password for the Base Station for this.

  You think maybe the wireless password when enter you the AirPort Utility?  If you are, you must enter the password for the Base Station. If you forgot, you can recover it from keychain access, everything as you got the password wireless.  Looking for a list of AirPort Base Station password.

• Why siri cannot find my films in my library?

  I try to use Siri to play a movie from my iTunes library, but cannot find the film of Siri.  For the love of God, why is this not possible?

  This seems to be the answer

  https://discussions.Apple.com/message/29433523#29433523

• HP Officejet 5740: HP Officejet 5740 printer for laptop connection problem: "cannot find a printer".

  I'm trying to set up my new printer Officejet 5740 and I got to the stage where I need to connect the printer to a laptop computer or mobile device. I went to 123.hp.com and follow-up stages. My printer is correctly connected to the internet, but when I tried to connect it with my laptop via wifi, I got a screen that says "cannot find a printer". Before that, he asked me to put the IP address that appears in the settings of the printer wireless.

  I have a dual band wireless router, and it seems that my printer can connect only to the 2.4 GHz frequency range. My laptop can connect to the scales of 2.4 GHz or 5 GHz. I made sure that the laptop was connected to 2.4 GHz when I did this step. I even Redid the same process on my sister's laptop (she has 10 Windows), but I came across the same problem. In addition, the screen with the error message says what must I make sure that the firewall has not been in the way of the connection. I tried to disable the Windows Firewall, but I still have the same result.

  I am at a loss for what to do here. Any help would be greatly appreciated. I'm positive, I put the correct IP address, and I even tried to use the host name. Also, I know that my laptop and the printer are connected to the same wireless network. Everything I did for this step in the installation process has been with wifi (not ethernet, USB, etc.).

  Good news! I thought about it. I have all my wireless settings to reset to the default factory settings and that fixed the problem. Something about the State of the router must have been extinguished when I put in place the first time. Thank you for helping me!

• Registry Booster Uniblue found 380 problems why windows cannot find them?

  Uniblue Registry Booster found 380 would have problems - why WINDOWS can't find them?

  Uniblue Registry Booster found 380 would have problems - why WINDOWS can't find them?

  Ignore what you said Uniblue Registry Booster and get rid of it. It and all similar programs, are useless at best and often very dangerous to use.

  Registry cleaning programs are * all * snake oil. The registry cleaning is not necessary and dangerous. Let alone register and do not use any registry cleaner. Despite what many people think, and what software record cleaning providers are trying to you convince to have used the registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake delete an entry you need is much greater than any potential benefit it may have.

  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns against the use of registry cleaners has never said that they always cause problems. If they have always caused problems, they would disappear from the market almost immediately. Many people have used a registry cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it the essential * risk * to have a problem. And since there is no advantage to using a registry cleaner, running the risk is a very bad deal.

• Why me cannot find 'c:\DOCUME~1\ADMINI~1\LOCAL~1\Temp\stop-virus.vbs '.

  Hai dear experts... whenever I start my computer am getting Windows Scripting - is not 'c:\DOCUME~1\ADMINI~1\LOCAL~1\Temp\stop-virus.vbs '.        Why do me this message?   Pease help me
  using windows xp

  For example, consider that you do not find a line in the display "Startup" ccleaner which included all of

  • Stop - virus.vbs
  • cscript.exe
  • WScript.exe

  Download and install Autoruns.  Let scanner up to cooking (see the lower left of the window).  Click the "all" tab.  Then file > search and for each of the 3 above.

  If you find the stop - virus.vbs, uncheck the box at the left end of the line.  If you find cscript or wscript, select the line, right click and "copy" then paste it in your next reply here.

  A quirk of the Autoruns to 'find' tool, it's that you must manually move the selection to the bottom of a line then press F3 to "find next."

• Connection Officejet 8500 for Apple AirPort Extreme

  I have on two devices.  The airport has a network running running.  I plugged the Officejet 8500 at the airport with a network cable.  When you open AirPort Utility, he does not see the printer.  When you use the printer menu, I was not able to find the right method of connection to the network.

  No, you can use (and use) Ethernet.  It's just that Airport utility didn't report it because it is not plugged into the USB port, which is good.

  Now that the printer is connected to your network, download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• How to download HP officejet pro 8500A 910 software when we cannot find the D drive?

  Download statement on my VA 10 computer to use our HP officejet pro 8500 A910 a?

  What windows operating system you are trying to install on?  Windows 7?  32 or 64 bit?  The link to the HP software online is exactly the same software that appears on the CD-ROM.  So please tell us how the installation gets before it does not.   Can you explain what you see?

  -GOES211

• Why can't I use my Airport Extreme routers to extend my Google fiber network?

  I had waited for a long time, and finally got Google fiber installed at my house this afternoon.  I had been so excited and had everything for my home network mapped out.

  I've never used router Wi - Fi an ISP, but I read that so many good things about the fiber of Google box Wi - Fi I had planned to make the core of my Wi - Fi network home.  The plan was to have the Google through my home box.

  I have two base stations Airport Extreme AC I used with my old set up with Time Warner.  My plan was to use to extend my Google Wi - Fi network with a floor and one on the ground floor. Unfortunately, I can not understand how to get there.

  I did a hard reset on two of my Airport Extreme routers and went to set them up as extensions, but I can't do it.  I have open Airport utility, select my device, choose 'Other Options', select 'Add to an existing network' and click Next...  Each time, my only option is to create a new network.

  Does anyone know a way around this?  I would really like to be able to have a base station wireless AC in every room of my house.  I also need the Airport Extreme routers set up somewhere in the chain so I can continue to do my wireless Time Machine backups.  Any tips?  I am currently very frustrated.

  Thanks in advance for any help!

  -Brian

  Unfortunately, Apple routers will not be able to extend wireless signal of a 3rd party router. Or, another way of saying the same thing, is that routers Apple will extend only wireless signal from another router from Apple.

  If you could install another Apple router near the Google router and connect the Apple router using an Ethernet cable to the router fiber, and configure the router from Apple provides wireless... then... other airports will be able to extend the signal of the "main" Apple router

  You can use the fiber for a second wireless network or comments... or... If you need another network, there is probably a way to disable the wireless router fiber.

  Another option... If possible... would be to run both of your Apple routers Ethernet cables to the router of fiber. Then, Apple routers can be configured to extend the network of fiber like that.  Note that Ethernet cables should be left in place permanently with this option.

• OfficeJet Pro 8000 Wireless does not connect to my new Airport Extreme router

  I've owned my Officejet 8000 Wireless printer for about a year and had no problems with it.  However, my old wireless router wasn't fully compatible Mac so I couldn't fix it with a password.  I now need a secure network, so I bought an Apple Airport Extreme router in December.

  Last night, I installed the router and it works fine on my iMac, my laptop and my iPhone.

  However, tonight, I'm trying to implement Officejet Pro 8000 with no luck.  I searched the posts here for 3 hours and am not finding the help I need.  Based on the other posts, I read, I describe my situation below.

  I am trying to set up the printer in my iMac Intel with Mac OS 10.6.4

  I'm trying to set up the printer with the installation wizard HP I just install the printer software.

  On the first screen of the wizard, it tells me that my device is not configured (I agree)

  Then I ask him to set up a wireless network.

  When I get to the network selection page, both my network AND my network of comments (that I let my neighbor use) are on the list with the full signal strength.

  When I click on my network and then continue, the HP installation wizard hangs and I have to stop, he.

  When I click on my guest and then network continue, I get the message that my network is not within reach.  (FYI, the printer is 10 feet from the router).

  I tried to power on/off the printer, the router and the computer at all different stages of the process with no luck.

  For my Airport:

  My radio is set to the most compatible choice

  MAC access control is not enabled

  Everything is WPA2 security

  'Use wide channels' and "Create a closed network" is unchecked

  The channel is set to 11

  I'm happy to try the "Add client in the network" thing I've seen on other posts, but I don't think that I have a front panel of the printer where I can start the "WPS" (don't know what it is) process.   If I do, it is not obvious and not in the HP manual.

  My ISP is Comcast (cable internet).

  I'd really, really grateful for the help!  Please let me know what I forgot to include information, and I will be happy to provide it.

  Thank you!

  OK to reset the printing system again, he may be blocked.

• OfficeJet L7780 how can I turn off the ringer?

  I want to turn off the ringer (phone ringing sound) on my OfficeJet L7780. I tried to work in the printer menus. I searched everywhere, including the manual and have not found an answer. Please help if you can.

  I only use the OfficeJet for outgoing faxes, I just need to hear the dial or connect tones, so if I turn those off to turn off the ringer, it's okay. Thanks in advance for your help, Ed

  Hi EdBublanski,

  Look on page 88 of the user guide.  Click here  Does that help?

• Why Airport Extreme disappeared from Airport utility, after adding to the mac feature?

  10.11 OS, with the version of the airport, 6.3.6.  I can see is no longer my Airport Extreme Airport utility after I activated to Mac. I have Airport Extreme base ME91899/A and two Airport Express units model A1392 bolt torque.  I set up the Airport Extreme unit and the network first.  I was able to see the Airport utility. I then added each airport express unit. They were also visible. Then I added back the ability of Mac to the Airport extreme unit, and now it is no longer visible in the Airport utility.  Why is this?

  Apple has problems much time with iCloud. Turn off Back to My Mac across your airport routers and then shut down and restart the entire network.

  We will have to wait for a fix from Apple.

• Airport Extreme 802.11ac - I have a defective router again?

  Dear Apple friends,

  I reduced a problem with my Airport Extreme 802.11ac wireless router which I hope someone can shed some light on.

  Things I've tried:

  • Hard reset
  • Factory full reset w. of new settings.
  • Two different Apple ID (account iCloud)
  • Connection via the devices iOS (iPhone and iPad, both on v9.3.4)
  • 7.7.3 downgrade (problem).
  • New upgrade to 7.7.7 (problem).

  That is the problem.

  If I put a ID for 'Back to my Mac' Apple Airport utility > basic Station... updated and restart the router...

  

  .. .the router will not appear in Airport utility again unless I connect to it directly via IP.

  

  A Wi - Fi connection works fine but I cannot access the airport, or whatever it be connected until I have remove the back to my Mac (Apple ID) of Airport utility references.

  This router is a replacement from the Apple Store for a faulty Airport Extreme 802.11ac, who died after a few months.

  Any suggestion would be appreciated. I think again that router to Apple, but before you make the trek down there, I would be a little sure that this isn't just a bug or a problem on the end of Apple.

  Thank you, in advance.

  No, you don't do anything wrong. This problem has been reported several times recently and the only 'solution' at this stage is to disable Back to My Mac on your AirPort base station, until Apple has a chance to solve this problem.

• Do a factory reset on my AirPort Extreme 802.11n resets my country code?

  Do a factory reset on my AirPort Extreme 802.11n resets my country code?

  Wireless Diagnostics warns on codes of countries in conflict.

  I ve got an AirPort Express 802.11n and an AirPort Extreme 802.11n

  The country code of the Airport Express is ok, but Airport Extreme shows me different options.

  Any suggestions?

  Please

  A factory default reset will set the area code of the AirPort Extreme back to the initial setting that it was when it was new, but this should not be necessary because you can change the country setting without having to perform a factory default reset.

  You can see the options available for your AirPort Extreme by opening AirPort Utility, by clicking on the image of the AirPort Extreme, and then click Edit in the window that appears.

  Click on the Wireless tab at the top of the window, and then click Wireless Options near the bottom of the window. Click on the country selection box to see the options available for your AirPort Extreme country.

  

  Apple is doing to "regionalize" airport routers, so, for example, that if you bought the AirPort Extreme in the AirPort Express to the United States and Europe, the country on the extreme options will only show of European countries, so that the country on the version options American Express shows countries in the Western hemisphere.