Why the timeline often continue?

Similar Questions

• [noob] Help understand why the event listener continues even after the withdrawal.

  Hey again,

  I'll try to do my best to explain. I can get this to work properly, but I'd like to understand why what I did before was not working.

  I have a little trouble understanding why an event listener continues listening to even after that I delete it. I have a facility where a Parent MovieClip ("CampScene") is established and an event listener is added to the look for a function ("walkUpToCampfire") to see if a condition is true ("comingFromAx is true", that won't be true until later).

  If it is true, an animation plays, an event listener is added to see if the animation is made and if it's an event listener is added to listen for a click ("campScene.goToAx") to a new animation to play and other events. (It won't be true until later.)

  If this isn't true (which is the situation that I work with at the start), the event listener said listening for a click on "campScene.goToAx" is implemented immediately. The function following removes the event listener, so it is supposed to stop listening to a click and let an animation play throughout.

  The problem is a continuous click to be listened to and if you keep clicking on the reboot of animation every time, which is what I don't want to happen.

  --------------------------------------

  I'm able to resolve the problem by adding the line "campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; or in mouseEnabled affecting false for "campScene.goToAx", but I try to understand what is happening.

  It is, even if I'm deleting the listener ("campScene.goToAx") in a function ("goToAxScene"), "campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire)"; continues to wait for a mouse click, unless it is removed also?

  Again, I am trying to understand how it works.

  --------------------------------------

  This should be all ACEs. Of course, I would like to know if you need more information. (I can post the FLA / AS files if need be.)

  public void practice_adventure8() {}

  ...

  initial event listeners

  addEventListener (Event.ENTER_FRAME, CampScene);

  }

  public void CampScene(event:Event) {}
  
  remove the event listener
  removeEventListener (Event.ENTER_FRAME, CampScene);
  
  Add the first camp scene
  campScene.x = - 120;
  campScene.y = - 10;
  addChild (campScene);
  setChildIndex (campScene, 0);
  
  Add the event listener to see if guys works with camp fire or not
  campScene.addEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  }

  IF RETURNING TO CAMPSCENE
  public void walkUpToCampfire(event:Event) {}
  
  If the guy is walking back to axe
  If (comingFromAx == true) {}

  event listeners
  campScene.guyAtCampScene.gotoAndPlay ("guyComingFromAx");
  campScene.addEventListener (Event.ENTER_FRAME, ifGuyDoneWalking);
  
  otherwise if initial creation
  } else {}
  
  remove the old event listener
  campScene.removeEventListener (Event.ENTER_FRAME, walkUpToCampfire);
  
  trace ("comingFromAx = false");
  event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  campScene.goToBridge.addEventListener (MouseEvent.MOUSE_UP, goToBridgeScene);
  }
  }

  IF RETURNING TO CAMPSCENE FACT
  public void ifGuyDoneWalking(event:Event) {}
  
  If the guy ended up in foot
  If (campScene.guyAtCampScene.currentLabel == "guyAtCampSceneNormal") {}
  
  reset the Boolean values of scene
  comingFromAx = false;
  
  Add event listeners
  campScene.addEventListener (Event.ENTER_FRAME, sceneHoverInfo);
  campScene.goToAx.addEventListener (MouseEvent.MOUSE_UP, goToAxScene);
  
  }
  }

  GET READY FOR THE NEW SCENE

  public void goToAxScene(event:MouseEvent) {}
  
  delete movement event listeners
  campScene.goToAx.removeEventListener (MouseEvent.MOUSE_UP, goToAxScene);

  
  stop all sounds
  SoundMixer.stopAll ();
  
  play the clip of guy walking to AxScene
  campScene.guyAtCampScene.gotoAndPlay ("guyGoingToAx");
  
  check the label to see if axScene must appear
  campScene.guyAtCampScene.addEventListener (Event.ENTER_FRAME, addScene);
  }
  

  Your best bet to solve why things happen is to make use of the trace function.  In this case, you may have a trace run every time this listener can addedand any time it is deleted.  In this way, you should be able to see if it was added in after he deleted.  If there are several places where it is added, then adjust your tracks to indicate which line is involved as well.

• Why the bookmark button continue from navigation to the bookmarks bar when I put it there. How to solve this problem?

  Because my screen is not that big, I want my bookmark toolbar elements (element for special bookmarks folder) take the entire width, and I want the button Favorites in the navigation toolbar (because I don't need this long url field).
  As you modify the toolbars and buttons, I change to what I want, but every time that save and close the window edit the bookmarks (with the drop below) button moves automatically to the bottom of a toolbar. It's very, very annoying, not least because in the edit mode, it's ok (it is also saved correctly).
  Any way to overcome this problem?

  When appears in the toolbar of bookmarks, the Bookmarks button moves automatically in the Navigation toolbar to the toolbar of bookmarks. This is expected behavior. I can't tell you why but, as it makes no sense to me either and I probably find twice as boring as you.

  Install the following extension.

  • Let full customize the Bookmarks button

• Need help on why the text size continues to change as I'm typing or research. Need help on why the page disappears when I try to send email or when I try to view a page online.

  Can someone tell me how to fix these issues?  When I type a message by e-mail or through a Web site, I get the microscope & then the text size change automatically if small I can't read.  The other problem I have is that I continue to in getting kicked off the e-mail page or Web page without hitting any other buttons.  When I type an email, and more text size change, I get a message box asking me if I want to leave the page, click ok or if I want to stay on the page, click Cancel.  I always click Cancel, but get kicked off the e-mail page anyway and have to start over.  This happened to someone?   I asked Acer (my brand of windows 7 computer) for help, but they say the warranty that I treat these & have to pay.  I asked Microsoft to help on this, but I have to pay.  I got this Acer Aspire 7540 for about a month.  Cannot get help anywhere.  Anyone know what to do or where I can ask for help?

  Hi Phylomel,

  -Since when are you facing this problem?

  -Do you have yo umake any changes made to your computer before this problem started?

  -This only happens when you access email through Internet Explorer?

  -This happens on all the websites or any websites?

  However, you can try to optimize the settings of Internet Explorer on your computer and check if that helps you solve the problem. Access the link below and follow the steps to optimize Internet explorer.

  http://support.Microsoft.com/kb/936213

  Also, you can check if the CTRL key on the keyboard is sturck and if the program is based on shortcut keys.

  You try to use the on-screen keyboard and check if the problem persists.

  Steps to start the on-screen keyboard on:

  1. click on start.

  2. open the control panel (Classic view).

  3. click on ease of access Center.

  4. click on on-screen keyboard

  You can also try starting an online virus scan to check if your computer is infected and remove infected items and check if it helps you to solve the problem. Go to the link below to run an online virus scan.

  http://safety.live.com

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the timeline scroll in 2015 CC PP, then fatally crash?

  I work in and on a system of nine MacPros editor at WRAL-TV.

  Each is a 3.5 Ghz 6 Core with 16 GB of RAM and each end 2013

  knows timelines scrolling in the middle of editing sessions, then

  passing by a fatal accident.

  This must be corrected immediately please.  Scrolling is

  editing impossible, and a broadcast as our Center does not work

  with waste of time like that.  Adobe is responsible for slots running out of air and

  loss of income.

  Here are the relevant error information:

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000009000003e9

  VM regions near 0x9000003e9:

  VM_ALLOCATE 00000001fa831000-00000001fac29000 [4064K] rw-/ rwx SM = PRV

  ->

  0000123400000000 - 00001234004a 5000 [4756K] __TEXT r-x/rwx SM = COW /System/Library/Extensions/AppleIntelHD4000GraphicsGLDriver.bundle/Contents/MacOS/AppleIn telHD4000GraphicsGLDriver

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.adobe.HandlerTimeline.framework 0x000000010cc11a34 HandlerTimeline::TrackViewArea::GetPlayerIsPlaying() + 4

  1 com.adobe.HandlerTimeline.framework 0x000000010cabf082 HandlerTimeline::CustomTrackHeaderView:OnPlayerPositionChanged (dvamediatypes::TickTime) + 1010

  2 com.adobe.HandlerTimeline.framework 0x000000010cac8f85 HandlerTimeline::CustomTrackHeaderView:ListenToMessage(ASL::Message_const&) + 645

  3 com.adobe.ASLMessaging.framework 0x0000000100f86b67 ASL::Broadcaster:BroadcastMessageInner(ASL::Broadcaster::ListenerRecord_const&,_ASL::Message_const&) + 39

  4 com.adobe.Frontend.framework 0x000000010006e9cc boost::function0 < int >: Operator() (const + 28)

  5 com.adobe.Frontend.framework 0x000000010006e6e2

  Please notify.

  Thank you

  Steve

  Hi Steve,.

  I work in and on a system of nine MacPros editor at WRAL-TV.

  Each is a 3.5 Ghz 6 Core with 16 GB of RAM and each end 2013

  knows timelines scrolling in the middle of editing sessions, then

  passing by a fatal accident.

  This must be corrected immediately please.  Scrolling is

  editing impossible, and a broadcast as our Center does not work

  with waste of time like that.  Adobe is responsible for slots running out of air and

  loss of income.

  Sorry for this frustrating problem.

  I reported this problem to the team since Premiere Pro CC 2014 (8.2). It happens with two monitors (usually DELL) and Mac OS X 10.10 and later versions. The problem does not occur with single monitors.

  We have a logged bug and the attention of the engineering team since the question seems to be trigger more accidents. Please fill in your crash report, Details of the system and any other findings in a bug report, found here: http://adobe.ly/ReportBug

  In the meantime, you can disconnect one of the double monitors as a workaround. I will push for a correction in the next patch. I hope it won't be too long from now.

  Thank you
  Kevin

• Why the drive to continue working without interruption when firefox works

  Hard drive are permanently being exploited so that firefox is running. The racket stops when firefox closes.

  You may have a faulty extension or malware. Follow these steps:

  • Troubleshoot your extensions and themes
  • Search for malware

• Why the button still going to slide as soon as I clicked on no Action?

  Hey all,.

  I hope that I don't ask already.

  Why my 8 button Captivate STILL goes to the next slide, even after that I went to the action/success: don't choose No Action or turn it off?

  I don't want the button to do anything until I have decide where the click will send the student.

  Thank you

  By clicking on the button in your case will execute any action, but it will always be to reactivate the timeline and let the blade to progress.

  Captivate 9 there is now another option button that allows to specify if or not you want the timeline to continue.  But this option does not exist in previous versions.

  I suggest that you have your button run a standard or conditional Action instead and just define the action of this fast Action to no Action.  In contrast to the unique Actions that you configure properties > menu Actions, these advanced Actions do not have a built-in action to continue.

• Advancing the timeline when all the clips are visible?

  Hello world. I'm looking to continue the timeline (basically gotoAndStop) when the Connectionwithsuchprocedures movieclips are visible.

  I'm doing a simple game where the user clicks on differences and they (clips) are made visible in a table of the discovered differences.

  When these clips are visible, the timeline should continue to the weft of congratulation.

  I was given the following code:

  If (mc1._visible & & mc2._visible & & mc3._visible & & mc4._visible) {} somemovieclip.gotoAndStop ("someframelabel"); }

  I replaced "mc1" etc with the instance of the entries in the table of record names which differences were found. However, I do not know where to put this script (I guess it's on the frame where the movieclips become visible when you click differences). In addition, that replace 'somemovieclip' with?

  If someone could help me please, I would be very grateful

  Laurence

  do not use for navigation, and scenes not using the goto functions.  Use the frame numbers or labels and goto methods:

  on (release) {}

  Engine._visible = true;

  If (Rivet._visible & Port._visible & Engine._visible & Aerial._visible) {}

  yourmovieclip.gotoAndStop ("Congratulations");

  }

  }

  to label which frame, go to frame 1 of scene congratulations, click the box and in the properties panel, type congratulations in the input textfield that shows the label.

• How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  What do you exactly mean by "get the slide to set up go to the right and continue"? Can you give us a little more context and detail?

• Why the fan on my macbook pro continue to run at a fast pace for long periods?

  The MacBook Pro mid-2010

  OS X El Capitan, 10.11.3 version

  Processor: 2.4 GHz Intel Core 2 duo

  Memory: 4 GB 1067 MHz DDR3

  Graphics card: NVIDIA GeForce 320 M 256 MB

  163 GB available

  iWorks ' 09 has been upgraded to the latest versions

  No new upgrade is available for the system.

  My Question: Why the fan on my macbook pro continues to run at a fast pace for long periods?

  I guess that the fan runs constantly, because the CPU is working at a high rate. I rebooted several times but without any resolution systems. At the bottom of the computer is very hot at times so place the laptop on an object that allows good air circulation. This problem occurs intermittently every few weeks or more. I wonder if it is downloading an important upgrade, do a scan of viruses, or by working as a bot. Lights for hours. Currently, I estimate that it has worked rapidly to possible 6 hours. Thank you.

  It will usually be to dissipate internal heat from running resource intensive applications.

  Download and install a temperature/speed control application.

  Open the activity monitor all THE PROCESSES and CPU to display values between high and low.

  When the fan speeds up, post pictures of both for review.

  Also run Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Ciao.

• Why can I not move objects to the bottom of the timeline in the video?

  

  Hello

  Why can't I move the new object I inserted (this is a PNG image) all down the timeline just above the video/audio? That's where I need?

  I edit the video with stripes, zooms and slices. I really hope that I can move it to the bottom of the timeline.

  Thank you

  This a cpvc of the project, right? Several chronologies are open when necessary, and it is indeed not possible (as in cptx projects) to change the stacking order. However, this could be a workaround: move the timeline you want to down horizontally until you have an empty space: you can then move it to the bottom. You'll go up the other deadlines in the location where you want to have this object at the bottom... Then, you will have to move again. Very heavy, I think it's much easier to think before you add objects and add them in the right order. CPVC-feature did not get much attention, after it was introduced, it is probably not that popular?

• My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  My normal short clip in the timeline panel. When I hit the break, vertical lines appear. The lines are also exported. Why?

  Found an answer online. Here it is:

  I also want to mention that if you disable your GPU acceleration and use the software only mode the question should stop. It seems to affect only when the GPU acceleration is turned on.

  Go to file > project settings > General and only software switch.

• Why get rid of Widgets on the Timeline?

  I use Adobe Captivate 8. After that I go to Interactions/Learning Interactions and choose a Widget, all right. The Widget appears on the scene. However, I have a question. Why the Widget doesn't go away once I play the first frame of the timeline in Captivate, but appears when I select an excerpt?

  Thank you

  That's what I tried to explain: you don't play the slide (or use the play button on the Timeline) to see how the published file will look only to the objects of time on the timeline as sync voice on audio with the appearance of the objects. If you want to see how the project will be really visible when you posted, you must use a real preview technique. The best review technical, closer to the published version is seen in the browser or HTML Preview in the browser.

  This 'white empty box' is simply a placeholder to show you where there's the widget, the widget itself is not 'play' with play Slide.

• As you drag the video in the Timeline, only audio files will show, not video.  Why

  Hello world!

  So I had to update to PPCC 2015 after 2014 CEP kept crashing on me while I just changed.  After having reopened the project and the program telling me to convert everything on the new 2015 PPCC, I didn't think it was a big deal.

  Well now, the old version of my project can still play all the videos, and the editing I've done, but when I try to drag in a new video to continue editing, only audio files will come in the timeline. The video will play in the window of the fine source drive, but try to get the actual image of the video in the timeline, will not be displayed.

  It makes me crazy!

  What should I do?

  It was activated at the same time. I closed my projects and rebooted my computer to see if that would do anything and now it works as usual. Thanks for your help anyway!

• When I import my video source into my calendar, which is why the audio GET stops after about one minute while the video continues to play flawless during playback?

  For context, I import a source element of 60 fps .avi in my calendar. This is a screenshot of what it looks like when I import into the attached timeline.

  

  For some reason, the audio is cut and cut without any kind of action performed on it. Once I've drag in the timeline, it appears like this. No idea why this is?

  Thanks in advance to anyone who can help you.

  Better to wait until everything is in line before you start to do something.

  May need to clean the media cache.

  Your avi looks like its in a screencapture program.

  Make sure that the codecs are compatible with the first and that she also has constant framerate.

  If this isn't the case, convert mp4 with Handbrake .