Why this read_write.vi works in the second inning?

Hello

I'm having a problem with the instrument drivers that I got from Newport.com. Most of instrument drivers for controlling the SMC100 uses a vi file named: read_write.vi, could someone let me know how we can change this vi, it seems to me there are too many false by default on this block diagram, is another way we can simplify this vi? Please see the photo and vi as an attachment.


Tags: NI Software

Similar Questions

  • There was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

    (1) there was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

    (2) where can I find so that I can then reinstall windows XP, updated to sp1, install the patch to see the complete player to sp2 and 3 can be installed?

    original title: supervision XP

    Maybe the disc has been formatted as part of your original installation of Windows XP with a pre - SP1 version of Windows.  At that point, he could only format the drive as 137 GB.  After you upgrade to a post-SP1 version of Windows, look at your hard drive with Disk Manager (start-> Run-> "diskmgmt.msc").  It can show the rest of your unused space that you might then be able to allocate in a second partition.

    If you want to keep one big partition, you will need to get a 3rd third party tool that can extend your current 137 GB partition to use more of the available space.  Google for it, plenty of them out there including those that are free.

    HTH,
    JW

  • < iframe > link to #anchor work only the second time

    I explore a way to offer a local within a framework of content Web HTML file so that it starts at a specific HTML anchor point rather than the top of the HTML page.

    Now, given that the Web Content overlay of DPS does not support URL + format (e.g. myfile.html #myanchor) of the anchor chain, I thought that I could achieve the desired result by loading an HTML file in the superposition of Web content that points to the HTML file and its anchor named in a tag < iframe >.

    It is where it gets boring. The solution works... but only on the second time you call to the top of the Web content overlay (normally hidden in an MSO).

    The first time I have call the overlay Web Content in my article DPS on the iPad, however, the HTML page but not the specified anchor point, or indeed at the top of the page HTML - instead, it seems to start a little more down the anchor. If I reject the superimposition of Web content (in my case, switch to another State of the object) and return, the HTML code recharge starting at the position of the anchor, exactly as planned. I can close the folio, reopen it and the behavior is always correct. It was only the first time that it fails to do the right thing.

    I am very happy that my solution works on the second, third and every opportunity, but it's very important that readers see first working time.

    I tried to delay automatic playback of the content of the Web, but this makes no difference. The anchor is identified using the tag "id".

    Any ideas?

    Thank you, Neil. But you can ask your guys to withdraw. Someone made me a coffee strong tonight and I realized that I was this approach from the wrong angle. I've seen this number of HTML pages requiring a refresh before you display it correctly in other circumstances, even in Chrome on my computer, so I doubt that it is a specific problem of the DPS - maybe it's something in webkit.

    Anyway, the coffee made me realize that I have an iframe to load another HTML file to an anchor. All I need is to pop a little GoToAnchor script in thetag and a call at the beginning of thetag.

    Someday, if someone corrects completely broken site of Adobe Cookbooks, I download a lot of these recipes.

  • X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

    X3650M5 does support stop automatically if this server has worked in the temperature of overheating?

    Hello
    Basically, Yes to your question.

    For more details;

    IMM2 Web GUI access via browser and see environmental specifications tab in the server properties menu.
    There are two types of threshold, "Higher criticism" and "upper Fatal".

    If goes on "Higher criticism", then a soft stop will be initiated, where the next depends on your operating system of his behavior causing shutdown graceful or not progressive.
    If more higher jumps "Upper Fatal", then a hard stop will be engaged, which is not a normal shutdown of the typical operating system perspective.

    Kind regards

  • Lightroom keeps trying to create a second folder "2016" under "2016", then of subfolders, why and how do I remove the second folder "2016".

    Lightroom keeps trying to create a second folder "2016" under "2016", then the subfolders with the correct name (date) at import, why and how can I remove the second folder "2016".

    One of the possibilities: when you import, you select a Destination folder that contains a subfolder of 2016 in the path (displayed in the green rectangle) when you really want a destination folder that does not have the 2016 subfolder in the path (shown in the red rectangle)

  • WHY CLOUDS DON'T INSTALLED ON THE SECOND COMPUTER?

    WHY clouds don't installed on the second computer... It just says time and again failing?

    attach a screenshot of the error message, http://forums.adobe.com/thread/963429

  • Debugging does not work in the second project

    Hello world

    I did a project (a small space shooter) and now I'm doing a new.

    I started to do a program and cs6 white flash professional project in flash builder 4.7.

    In the first project everything worked well.

    But now, the second project, I have a big problem: the AS3-files are not recognized... or are they? Debugging does not work, the program starts, but she holds on a single break point.

    It's the same thing in Flash Pro itself. So it's not a problem of Flash Builder...

    I just checked and discovered that my first project runs with the same properties, but debugging works fine.

    Here is a small screenshot

    problem.jpg

    Doesn't anyone have an idea how to make this work? The class 'Boat.as' is a MovieClip with a small triangle. It does nothing...

    Thanks for helping everyone!

    Greetings

    Mischaaal

    1. the packaging is almost certainly incorrect, that's why that is not used.  to confirm, which is the document class in the properties of your fla Panel?

    2. you have a stray line of no code in your constructor.

  • When I open a new tab, the back button does not work on the second page, I discover - never the second page, regardless of the site.

    When I opened a new tab - or when I first open a browser - as soon as I go to a second page, I can't go back to the first. Thus, for example, I opened a new tab. I go to a news site. I click on a title. I can not then go back to the first page of the new site. If I go back to the first page manually (by typing the url, or by opening a bookmark) and then click on the same heading, I'll be able to go back.

    The inability to return only ever happens on the second page opens in a new tab or window. At any time, I can go back as normal - but the first page I was on that tab / in this window is erased from history.

    This isn't something that's happened only with FF4, either. I first noticed a couple of weeks, but I upgraded shortly after, assuming it was a bug that would set the new browser. But it's always like that. He still refuses to back the second page of the first.

    This problem may be caused by an extension (McAfee SiteAdvisor) that is not working properly.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

    • Makes no changes on the start safe mode window.

    See:

  • The calculator program working if the second number is more than 1 digit.

    I was setting up a calculator on labview, which works except for when I entered that a second number of the calculator does not have the correct value if the second number is more than 1 digit. I think it's down to the use of shift registers and result of the operation is forgotten when a key is pressed. I joined the program, if someone could confirm that this is the problem / suggest potential ways around this problem that would be a great help

    RavensFan wrote:

    Use default if Unwired.  Several of your tunnels are defined in this way, including the orange wire (double-precision) where you store your first operand.

    If you run an event where a wire is not connected through the tunnel will display by default (empty for string, double zero) and the shift register will then forget what he was originally in it.

    I think you meant not to use the default value if Unwired?  I think you have to tell him to use linked entry Tunnel--> Create and wire Unwired cases instead?

  • Fax fails on a single number, then worked on the second try

    I have an Officejet Pro 8600.  It works great except for one problem.  I have to fax my timesheet to another office, so I programmed the fax number in the telephone directory on the fax.  When I send the fax, I get a printout of fax failed with error 351.  I turn around and there refax, and she goes through fine.

    This happens without fail every time this number only.  I can fax other places very well, but not this one.  I tried to return the number in the phonebook and I tried to manually dial the number, but the same thing happens.  First test gives the error message and second test is going through.

    Any ideas on what may be the problem?

    Thank you!

    jachang,

    The rerouting would make sense - if you try the number very soon, within seconds, and the 'way' is blocked, then the signal - phone call or fax - find another way to make endpoint.

    There may just be something on the path of this company in particular or place in the world of telephone line, which is difficult to reach for this fax signal.

    The explanation may be completely wrong.

    I've dealt with this kind of question at our two locations for decades (Yes) - there is not a lot that's not happened to our son, boxes, poles: animals, bees, cable crews working on "other equipment", storms, ice, rocks, trees (branches or trees all fall), the occasional Act of vandalism, mystery suddenly disconnects, cars crashing into the junction boxes (it was exciting for a while - our phone is connected to a mystery phone number) for a few days) and just plain old noisy, dirty, bad weak signals.

    • Try a filter of such line suggested in fax configuration instructions, if such is available for your printer.
    • Make sure that you are using the telephone line that is appropriate as it is shipped with the printer therefor, if such has been provided in the box.
    • If there is a wireless phone very close to the printer, move it a little further - say a metre or more.   This is useful if the wireless telephone is an older type, say the 2.4 GHZ that may interfere with the wireless.  It can help the fax?  Meh.  It does not hurt to have things like neat and confrontational as possible 'no' when you have weird questions.
    • Make sure the wires just behind the point of connection into your wall jack for the connection of telephone line, are wired safely and are not loose.  You should only remove the plate and check it.   Be careful, of course, especially if this isn't your area of expertise - have a friend to watch if you're not comfortable with the idea.

    Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

    Although I strive to reflect best practices of HP, I do not work for HP.

    Click on accept as Solution when the answer is a good solution or workaround!

  • Please tell me why this won't work cross-platform (parallax)

    http://jeyone.BusinessCatalyst.com

    My new test site: http://jeyone.BusinessCatalyst.com

    In chipboard with Adobe song > downloaded through Dream Weaver > account BC

    IM struggling to understand why this Parallax site or this entire site will not work on iphone 5 or ipad

    Simon

    Hi Simon,.

    iOS does not support Parallax scrolling.

    The reason for this, is because Parallax is too heavy on the graphics processor. iOS cannot handle [yet].

  • The work on the second computer file transfer

    Hello

    I developed a site of modest family on my computer at home using DW CS4. When I open a page and select F12 to view it in a browser, all my links etc work, and from this initial point of view, I can see the whole site via the menus or links.

    So... I'm going on a trip where Internet access is severely limited I copied all the content of my site on my laptop. The goal is to show what my site looks like members of the family who do not have Internet.

    But... it doesn't seem to work... same copy of DW on my laptop, I can open (and probably edit) any page but when I click F12 to view the page in my browser, this page opens but no links work or menu items.

    Why should it not working on my laptop as it does on my desk? Can anyone tell / show me how to solve this problem?

    Thank you for your time

    How do you transfer files on?  By copying the folder root of Computer1 to computer2?  And then by importing the exported site definition?

  • Why Roboform2Go does not work because the new Firefox undate?

    Each time is updated to Firefox (which happens every 2 weeks or more), the ability to use Roboform2Go on a flash drive is broken. Sometimes Roboform2Go update fixes this, but usually not. Sometimes go back to a previous version of Firefox works, but then I am constantly encouraged to upgrade to the latest version. Today Firefox v 37.0.2 worked with Roboform2Go v 7-9-12-2, and then suddenly crashed. When I restarted Firefox, the Roboform2Go toolbar was gone. When I ejected and restarted Roboform2Go, the toolbar was still gone. When I stopped and restarted the PC restarted Firefox and the Robofmr2Go, still no toolbar. I like Firefox, but I can't live with Roboform2Go. Firefox can not learn to play nicely with Roboform2Go?

    I do not see Roboform in the list details of the system, either as active or disabled, so it seems that Firefox cannot find the extension.
    I don't know if the extension is installed worldwide and normally found by Firefox via an analysis of the register or that the extension is installed in the Firefox profile folder.
    If the extension is found through an analysis of the registry, then it looks like that this registry key is missing.

    Have you tried to uninstall and reinstall Roboform?

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

    If you see disabled extensions or is not compatible in ' Firefox/tools > Modules > Extensions ' and then click the Tools button at the left end of the search bar to check if there is an update available compatibility.

    If this did not help, then also delete the files addons.json and addons.sqlite possible.

    Try resetting the pref browser.uiCustomization.state via the context menu, by default.
    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

    You can try to rename (or delete) the file xulstore.json in the Firefox profile folder.
    You can use this button to go to the Firefox profile folder currently in use:

  • This memory will work with the 23-g010 Pavilion?

    I have a HP Pavilion 23-g010 all in one PC of office tomorrow. I have a question about RAM upgrades. I have a HP Pavilion laptop 2010nr g7. I looked at the specs and they look like both use PC3-12800-1600 MHz memory chips. No one knows for sure if the memory of the laptop will work in the Office? I would like to extend that 4 GB in the office by adding 4 GB of the laptop (to give the office 8GB). This would allow me to save money in new purchasting RAM for now.

    Does anyone know if the memory of these two machines are compatible?

    I don't blame you.

    No, if the memory is not compatible, the PC boots or something like that.

    It should not destroy your PC.

    Just make sure that you unplug before working inside the PC.

    According to me, that it will work fine as long as the tensions are the same.

    These two circuits must be of 1, 5V.

    Even if the chip is 1.35v, the worst-case scenario is that the PC does not start.

    Some memory claims DDR3L (low voltage = 1.35v).

  • Why IPsec does NOT WORK when the PPP encapsulation is running?

    Hello

    I'm really new in the CISCO world, sorry if I ask stupid questions, I'm still in school to have one day my CCNA?

    By reading some books and browsing the net, I was finally able to connect my to routers with IPsec VPN link.

    The installation program is to follow:

    NETWORK 192.168.1.0/24--->INT ROUTER F0/0 2610XM 172.16.1.1--> INT INTS0/0 S0/0 172.16.1.2 ROUTER 2610XM INT F0 / 0---> 10.0.1.0/24 NETWORK

    I can now PING:

    192.168.1.1

    172.16.1.1

    172.16.1.2

    10.0.1.1

    Sins, I deleted this:

    encapsulation ppp

    Chap PPP authentication protocol

    No idea what I forgot when I implemented this?

    Here below the full configuration of work if you remove the lines above (maybe this can be useful for beginners like me):

    ROUTER

    version 12.4

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    no password encryption service

    !

    hostname Router_A

    !

    boot-start-marker

    boot-end-marker

    !

    !

    No aaa new-model

    !

    resources policy

    !

    no location network-clock-participate 1

    No network-clock-participate wic 0

    IP cef

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    crypto ISAKMP policy 1

    BA aes

    preshared authentication

    Group 2

    address of cisco crypto isakmp 172.16.1.2 keys

    !

    !

    Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

    !

    router_A_to_router_B 10 ipsec-isakmp crypto map

    defined peer 172.16.1.2

    Set transform-set RIGHT

    match address 101

    !

    !

    !

    !

    !

    interface FastEthernet0/0

    IP 192.168.1.1 255.255.255.0

    automatic duplex

    automatic speed

    !

    interface Serial0/0

    bandwidth 64

    IP 172.16.1.1 255.255.255.0

    encapsulation ppp

    64000 clock frequency

    Chap PPP authentication protocol

    router_A_to_router_B card crypto

    !

    !

    IP route 0.0.0.0 0.0.0.0 Serial0/0

    !

    no ip address of the http server

    no ip http secure server

    !

    access-list 101 permit ip 192.168.1.0 0.0.0.255 10.0.1.0 0.0.0.255

    !

    !

    !

    !

    !

    control plan

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    Line con 0

    Speed 115200

    line to 0

    line vty 0 4

    opening of session

    !

    !

    end

    ROUTER B

    version 12.4

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    no password encryption service

    !

    Router_B hostname

    !

    boot-start-marker

    boot-end-marker

    !

    !

    No aaa new-model

    !

    resources policy

    !

    no location network-clock-participate 1

    No network-clock-participate wic 0

    IP cef

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    crypto ISAKMP policy 1

    BA aes

    preshared authentication

    Group 2

    address of cisco key crypto isakmp 172.16.1.1

    !

    !

    Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

    !

    map Router_B_to_Router_A 10 ipsec-isakmp crypto

    defined peer 172.16.1.1

    Set transform-set RIGHT

    match address 101

    !

    !

    !

    !

    !

    interface FastEthernet0/0

    IP 10.0.1.1 255.255.255.0

    automatic duplex

    automatic speed

    !

    interface Serial0/0

    172.16.1.2 IP address 255.255.255.0

    encapsulation ppp

    Chap PPP authentication protocol

    card crypto Router_B_to_Router_A

    !

    interface Serial0/1

    no ip address

    Shutdown

    !

    interface Serial0/2

    no ip address

    Shutdown

    !

    !

    IP route 0.0.0.0 0.0.0.0 Serial0/0

    !

    no ip address of the http server

    no ip http secure server

    !

    access-list 101 permit ip 10.0.1.0 0.0.0.255 192.168.1.0 0.0.0.255

    !

    !

    !

    !

    !

    control plan

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    !

    Line con 0

    Speed 115200

    line to 0

    line vty 0 4

    !

    !

    end

    Best regards
    Didier Ribbens

    Yes, you are absolutely right. All the best with the learning...

Maybe you are looking for