Why updated important keep for lack of 66A on Windows Vista

Similar Questions

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  How can I fix windows update agent 32-bit vista Windows Update agent 7.6.7600.256 keep for lack of 8007041D error code

  Clean boot tried tried reboot fix he said componet needs to be repaired

  Please answer each of the following [admittedly tedious] diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5 are ALL the following updates listed in installed updates (not update history)? [1]

  (a) KB2705219, KB2712808, KB2744842 [KB2722913 or KB2719177 or KB2699988], KB2731847 [or KB2718523] and maybe KB2736233;

  (b) KB2698365, KB2691442, KB2655992 & KB2719985 [or maybe KB2721691];

  (c) KB2685939 and possibly KB2686833.

  (d) KB2658846, KB2659,262, KB2660649,562, KB2688338 & KB2690533 KB2676;

  (e) KB2393802 KB2644615, KB2633171, and especially KB971029.

  6. If Windows Vista Service Pack 2 is listed in the installed updates, when (the exact date) he was installed according to the history of the update (this time)? [2]

  7A. is the 7 Version of Java Update 7 (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://java.com/en/download/installed.jsp

  7 b. v11.4.402.278 is Adobe Flash Player (or higher) installed? TEST HERE in USING INTERNET EXPLORER (ONLY!)-online http://www.adobe.com/software/flash/about/7. Is Firefox, Chrome or any other alternative browser installed?

  8 is Firefox or another alternative browser installed in addition to Chrome?

  9 have you ever had the opportunity to do a repair installation or a clean installation of Windows?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner Registry Cleaner)?

  ==================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] start | Control Panel | Windows Update | View the update history (in the left menu)

• updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  updated itunes,-, outlook, for, icloud, would not work, windows, outlook 10, 2016

  Error: 0 x 80040604: upward / POST: conflicts

  [Error: 0 x 80040604: Up/HdlPOSTr[p06-caldav.icloud.com/412/0#16/83]

  See if it might help - Error: 0 x 80040604: Up/POST: conflict

• automatic updates are installed for Firefox (3.6) on Windows 7, every 2 days - is this normal?

  automatic updates are installed for Firefox (3.6) on Windows 7, every 2 days - is this normal?

  This has happened

  A few times a week

  == I've upgraded to WIndows 7

  See https://support.mozilla.com/en-US/forum/1/735744

• Sims3: someone can give me a few steps for the sims3 on a windows vista installation?

  Can someone give me a few steps for the sims3 on a windows vista installation?

  Insert the DVD into the optical drive, wait until automatic execution appears, select Run Setup.

  During the installation you will be asked for your key you will find on the booklet inside the DVD case.  It will also go and get the EA Updater software so make sure that you are connected to the internet during the installation.

• How can I get a driver for printer Canon I455 (my windows vista 32)

  How can I get a driver for printer Canon I455 (my windows vista 32)

  You can get this support from Canon... If they chose to take over the device in the given operating system.

  Looking at the Website of Canon's Support for this printer and select your operating system, they * sentence * support with your particular operating system.

  "This software is a module that extends the functionality of the printer driver for Canon inkjet printers. Your printer must be installed through Microsoft Update before you download and use this module. »

  So, basically install you by choosing to look on the Microsoft Update site when you try to install the driver.  It will download one Cannon gave to Microsoft after the release of Windows Vista.  Then, you restart and download the other file (on-site support) to give you more features.

• Why has my tv tuner stopped being recognized by windows vista

  Why my tv tuner ceased to be recognized by windows vista, repeat me driver but I can not get a drive to be well

  Hello

  1. have you made changes on the computer before this problem?

  2. What is the number of brand and model of the TV tuner card?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If Device Manager check the TV tuner card is detected no.

  Get help with Device Manager errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available": http://support.Microsoft.com/kb/929453

  Hope the information is useful.

• How to disable IPV6 for the LOOPBACK address in windows vista

  Hi all

  I have problems in ASP.NET when running any site due to IPV6 alias for the loopback address

  So I need to know how to disable IPV6 for the LOOPBACK address in windows vista

  Help, please

  http://www.lboro.AC.UK/it/Vista/IPv6.html

  There is a record for this difficulty to the bottom of the page above for Tunnel and loopback interfaces...

• Waiting for SP1 to come through Windows Vista update?

  Hello:

  I have been waiting for SP1 to make an appearance through Windows Update and am still waiting. I checked the knowledge base and checked all problem drivers to see if I had any of the components.

  I don't have one of them, nor I have hidden updates that I chose to not not to install. Is there anything else that I could possibly check? I checked all my drivers in Device Manager, and all are updated.

  Thank you!

  Hi guys

  I think you should check Microsoft's own article on this topic:

  * + Is not available for installation from Windows Update and is not offered by automatic updates of Windows Vista Service Pack 1. + *
  http://support.Microsoft.com/kb/948343

  There are various reasons why the SP1 cannot be received through the automatic update.

  Good bye

• Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully. 8007371 C error code. Windows Vista Edition Home Premium Service Pack 2

  Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully.

  Other updates DO not seem to be successful.

  Error code is 8007371 C.

  How can I get this update successfully.

  Windows Vista Home Premium Service Pack 2, 64-bit system.

  Thank you

  Hello

  You can view these methods:

  Method 1: Temporarily disable the security software

  I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2: Reset the Windows Update components

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.
  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Method 3: Clean boot

  I suggest to clean boot and try to install the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Once you make these methods try to install the update and check if it works.

  See the following links:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/20fa3032-Cdc6-4FF5-aea4-fd31a65e883d/

  It will be useful.

• Why is the preview for my calendar so pixelated window?

  Why is the picture in my preview for my calendar so pixelated window? IM using a GB of ram mac pro 16 / 6 core / over-pants d300

  Click the key for the program monitor, and you'll see a menu that gives you the possibility to adjust the parameters for both play and pause.

  

• Halo: Combat Evolved for PC works only on Windows Vista - Error Message "" unload the debugger, and then try again."

  I'm having a problem running Halo: Combat Evolved on Windows Vista. I can insert the disc and install the game without problem. The problem is that when I try to launch the game, I get error message saying "" unload the debugger, and then try again." I tried to install some of Halo patches to see if that would fix the error (for example, 1.6 and 1.7), but when I try and open the patch .exe file I get an error message telling me to go to a microsoft Web site or try to update the game manually. In addition, I tried to contact Gearbox Software to see if they could help me, all they said was to contact Microsoft.

  Does anyone have any suggestions as to why the game does not work for me and how can I make it work?

  Let me know, thanks. :)

  Hello whyohwhy42,

  I suggest that you follow the section below. This includes various possible steps to solve this problem:

  http://support.Microsoft.com/kb/812759

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer is located in a loop of reboot installation update to the configuration of the stage on Windows Vista updates

  problem with the configuration of updates on windows vista - endless loop - no way out

  like many before me, I can't start my computer because windows update has got stuck to the configuration. When I try safe mode, it ends up with screen-cant even get on the system of repair-naoual the same loop. No one at microsoft knows the answer to this >

  You need to start on the Startup Repair disk or recovery Manufacturer'e disk/s.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation failed for HP Photosmart C6180 wireless for my laptop HP Pavilion (window Vista Home Premium) 64-bit

  Hello

  I have HP Photosmart C6180 all-in-One printer, that works well with my other Compaq Presario SR2001NX desktop (Window XP) wired without any problem.
  But after I bought the new laptop about a month ago, I tried to install this printer on my wireless laptop.
  I downloaded HP driver for vista 64-bit, which is not always in the final phase of installation showing big 'X' mark on the screen of the window.
  Several chatting online with HP technician did not work at all, and I couldn't connect the printer with that laptop apparently more up-to-date, which is quite frustrating.
  I know how to connect the printer wireless with router. The printer screen shows it is correctly connected to the Wi - Fi network.

  I wonder if Microsoft already knows this kind of installation problems.

  It seems that Windows does not install automatic blower for this printer. Most of the HP printers is listed on the function of automatic installation of the window, but this printer is not included.

  Hello Itnntkim,

  Thanks for posting of Microsoft Answers.

  I checked on the compatibility of Windows Vista site and this printer is compatible with the 64-bit system, but it shows there is a required download for the drivers. I've included here the compatibility site.
  http://www.microsoft.com/windows/compatibility/Details.aspx?type=Hardware&p=PhotoSmart%20C6180%2032%2f31ppm%204800x1200dpi%20Print%2fCopy%2fScan%2fFax%20NIC%20U&v=HP&uid=Q8181AABA&pf=0&pi=0&s=HP%20PhotoSmart%20C6180%20all-in-one%20multifunction&os=32-bit

  Make sure that you have all the updated drivers for the HP Photosmart C6180 all-in-One printer.
  The website below is for drivers for this model for Windows Vista 64-bit system.
  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100&LC=en&cc=us&DLC=en&product=1153494&lang=en

  We have downloaded the drivers, then uninstall the drivers you currently have. And then update with the new drivers.  If when you do that, you still get an error, please answer with the exact error message so that we can continue to troubleshoot with you.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.